DIN 16272-2004

压力计用带分别断流试验接头的止回阀PN 250和PN 400

PN 250 and PN 400 valves with shut-off test connection for pressure gauges

适用范围：The document defines sizes and materials for PN 250 and PN 400 valves with test connection for pressure measurement.

DIN 28601-2000

可锻铸铁管和配件.螺丝套管接头.总成、接套、螺丝环和滑环

Ductile iron pipes and fittings - Screwed socket joints - Assembly, sockets, screw rings, sealing rings and slip rings

适用范围：The document applies for screwed socket joints for ductile iron pressure pipes and fittings for gas and water pipelines according to DIN EN 545 or DIN EN 969 and for sewerage application according to D...

EN 295-4-2013

排水和排污陶土管 第4部分:适配器,连接器和弹性联轴器的要求

Vitrified clay pipe systems for drains and sewers. Part 4:Requirements for adaptors,connectors and flexible couplings

实施日期：2013-02-01

BS EN 3611-1995

套筒.尺寸和配合选择.设计标准

Zentrierbunde. Masse und Passungsauswahl. Konstrucktionsnorm Spigots-Dimensions and fit Selection-Design Standard (S) Pièces de centrage. Dimensions et selection d'adjustement. Norme de conception

适用范围：This standard specifies the dimensions and fit selection of tight fitting spigots for locating casings and other major components for aerospace applications.

实施日期：1995-01-01

DIN 28603-2002

可锻铸铁压力管和异型件.连接尺寸和质量

Ductile iron pipes and fittings - Push-in joints - Survey,sockets and gaskets

适用范围：The document applies for push-in joints system TYTON in two insertion depths for DN 80 up to DN 1400 as well as for system standard for DN 1000 up to DN 2000 for use with pipes and fittings according t...

ISO 8533-2003

玻璃增强热固塑料(GRP)管和管件 验证粘接或层压接头的试验方法

Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Test methods to prove t...

适用范围：ISO 8533:2003 specifies methods of test for cemented or wrapped joints for plastics piping systems made of glass-reinforced thermosetting plastics (GRP) for buried and non-buried pipelines. This standa...

发布日期：2003-12-01  实施日期：2003-12-01

NF R38-402-1972

自行车 座位夹

Cycles-saddle clamp.

实施日期：1972-06-01

BS 5627-1984

水平排水陶瓷抽水马桶槽用塑料连接件规范

Kunststoffverbindungsstuecke fuer WC-Becken aus Sanitaerporzellan mit waagerechtem Abfluss Specification for Plastic Connectors for Use with Horizontal Outlet Vitreous China WC Pans Raccordements en pl...

适用范围：Specifies materials, dimensions and performance requirements of plastics WC connectors designed to connect horizontal outlet WC pans complying with the requirements of BS 5503 Part 1 and 2 or BS 5504 P...

实施日期：1984-01-31

EN ISO 5183-2-2001

Resistance Spot Welding. Electrode Adaptors,Male Taper 1:10. Part 2:Parallel Shank Fixing for End-Thrust Electrodes ISO 5183-2:2000;Supersedes EN 25183-2:1991

实施日期：2001-10-01

DIN 47634-1984

通讯电缆用热塑塑料套管 要求 检验

Plastic heat shrinking sleeves, for telecommunication cables; requirements, tests

ISO 5183-2-2000

电阻点焊 外锥度１:１０电极接头 第２部分:端推力电极用平行柄接头

Resistance spot welding -- Electrode adaptors, male taper 1:10 -- Part 2: Parallel shank fixing for end-thrust electrodes

发布日期：2000-12-01  实施日期：2000-12-01

DIN 16271-2004

压力计用带试验接头的止回阀 PN 250和PN 400

PN 250 and PN 400 valves with test connection for pressure gauges

适用范围：The document defines sizes and materials for PN 250 and PN 400 valves with test connection for pressure measurement.

EN 969-2009

球墨铸铁管、管配件.气管的要求和试验方法

Ductile iron pipes,fittings,accessories and their joints for gas pipelines. Requirements and test methods

实施日期：2009-03-01

NF A82-104-1-2000

Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1 : conical fixing, taper 1:10.

BS EN 1329-1-2000

建筑物结构内土壤和废水排放(低和高温)用塑料管道系统 未增塑聚氯乙烯(PVC-U) 管道,配件和系统规范

Kunststoff-Rohrleitungssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebaeudestruktur. Weichmacherfreies Polyvinylchlorid (PVC-U). Anforderungen an Rohre,Formstuecke ...

发布日期：2000-02-15  实施日期：2000-02-15

ISO 1089-1980

点焊设备的电极锥度配合 尺寸

Electrode taper fits for spot welding equipment -- Dimensions

适用范围：Refers to taper dimensions and tolerances for electrode caps, electrode adaptors, electrode holders and similar parts, where the electrode force Fmax, given for diameter d1 in tables 1, 2 and 3 is not ...

发布日期：1980-03-01  实施日期：1980-03-01

DIN EN ISO 5183-1-2000

电阻焊接设备.外锥度1:10电极接头.第1部分:圆锥接头,锥度1:10

Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1: Conical fixing, taper 1:10 (ISO 5183-1:1998); German version EN ISO 5183-1:2000

ISO 8085-1-2001

与供给燃气聚乙烯管材配套使用的聚乙烯管件 公制系列 规范 第1部分:使用加热工具承插熔接的管件

Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels -- Metric series -- Specifications -- Part 1: Fittings for socket fusion using heated tools

发布日期：2001-09-01  实施日期：2001-09-01

NF E62-516-1978

莫氏锥柄和７／２４锥柄螺纹端面铣刀杆轴

Threaded end cutter arbors with morse taper and 7/24 taper.

DIN 4945-1-2005

给水抗拉插接头立管 第1部分:DN 50-DN 200涂塑钢管

Rising pipes with tension proof socket for water raising - Part 1: Steel pipes DN 50 to DN 200, plastic coated

适用范围：The standard lays down the requirements and dimensions for rising pipes made from steel and stainless steel, which are used for fitting out drilled wells. For pipe connection a tension proof socket is ...

实施日期：2005-12-01