NF E25-725-2003

Closed end blind rivets with pull mandrel and protruding head - A2/SSt.

DIN EN 10217-7-2005

压力焊接钢管 交货技术条件 第7部分:不锈钢管

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes

NF E25-400-6-2010

Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2 : nuts.

DIN EN ISO 3506-4-2010

耐腐蚀不锈钢紧固件的机械性能 第4部分:自攻螺钉

Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws

适用范围：This document specifies for tapping screws threads between ST2, 2 and ST8 made of austenitic, martensitic and ferritic steel grades of corrosion-resistant stainless steels the hardness classes, materia...

实施日期：2010-04-01

BS ISO 21610-2009

Corrosion of metals and alloys. Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels

实施日期：2010-01-31

BS EN ISO 3506-3-2009

耐腐蚀不锈钢紧固件的机械特性.不低于拉伸应力的定位螺丝和类似紧固件

Mechanische Eigenschaften von Verbindungselementen aus nichtrostenden St?hlen. Gewindestifte und ?hnliche nicht auf Zug beanspruchte Verbindungselemente Mechanical properties of corrosion-resistant sta...

适用范围：This part of ISO 3506 specifies the mechanical properties of set screws and similar fasteners not under tensile stress made of austenitic stainless steel, when tested over an ambient temperature range ...

实施日期：2009-12-31

EN ISO 3506-4-2009

Mechanical properties of corrosion-resistant stainless steel fasteners. Part 4:Tapping screws

实施日期：2009-11-01

ASTM A451/A451M-2006(2010)

高温用离心浇铸奥氏体钢管规格

Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service

适用范围：<p id="s00002">1.1 This specification covers austenitic alloy steel pipe for use in high-temperature, corrosive, or nuclear pressure service. </p> <p id="s00003">1.2 Several grades of austenitic stain...

实施日期：2006-09-01

NF A49-170-3-2009

Butt-welding pipe fittings - Part 3 : wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements.

DIN EN 10253-3-2009

Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements

实施日期：2009-02-01

NF E25-721-2003

Open end blind rivets with break pull mandrel and countersunk head - A2/A2.

DIN EN 10222-5-2000

压力目的用钢锻件.第5部分:马氏、奥氏和奥氏-铁素体不锈钢

Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels; German version EN 10222-5:1999

适用范围：The document deals with steel forgings for pressure purposes.

NF E25-100-6-2010

Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1 : bolts, screws and studs.

DIN EN ISO 643-2003

钢 表观晶粒度的显微金相测定法

Steels - Micrographic determination of the apparent grain size (ISO 643:2003)

适用范围：This standard specifies the micrographic method of determining apparent ferritic or austenitic grain sizes of steels.

EN ISO 15984-2002

Open end blind rivets with break pull mandrel and countersunk head A2/A2 ISO 15984:2002

实施日期：2002-11-20

ISO 643-2012

钢.铁素体或奥氏体晶粒大小的显微照相测定

Steels -- Micrographic determination of the apparent grain size

适用范围：ISO 643:2012 specifies a micrographic method of determining apparent ferritic or austenitic grain size in steels. It describes the methods of revealing grain boundaries and of estimating the mean grain...

发布日期：2012-12-01  实施日期：2012-12-01

ASTM A943/A943M-2001(2014)

喷涂成形奥氏体不锈钢无缝管规格

Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes

发布日期：2014-01-01  实施日期：2014-01-01

DIN EN ISO 15984-2003

带心轴和沉头和开口端的铆钉 A2/A2 (ISO 15984:2002)

Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002)

适用范围：The document specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel, countersunk head, made of A2/A2.

DIN EN ISO 3506-2-2010

耐腐蚀不锈钢紧固件的机械性能 第2部分:螺母

Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts

适用范围：This document specifies for nuts of any shape, with nominal height greater or equal 0, 5 D and with nominal thread diameter D smaller or equal 39 mm made of austenitic, martensitic and ferritic steel g...

实施日期：2010-04-01

BS EN 10253-3-2008

Formstücke zum Einschwei?en. Nichtrostende austenitische und austenitisch-ferritische (Duplex-) St?hle ohne besondere Prüfanforderungen Butt-welding pipe fittings Part 3:Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements Raccords. souder bout. bout. Aciers inoxydables austénitiques et austéno-ferritiques sans contr?le spécifique

实施日期：2008-12-31