NF L31-270-1994

Aerospace series. Bearings, airframe rolling. Single row self-aligning roller bearings in steel. Diameter series 3 and 4. Dimensions and loads.

BS EN 2790-1991

带自润滑套和啮合量为1.5双螺纹PH1的螺纹轴的自动调节滑动轴承连杆可调端头.尺寸和负载

Luft-und Raumfahrt. Einstellbare ?senk?pfe mit Gelenklager mit selbstschmierender Beschichtung und Gewindeschaft mit Einschraubtiefe von 1,5 x Gewinde. Ma?e und Belastungen Rod Ends,Adjustable,Self-Ali...

适用范围：Characteristics of adjustable rod ends for use with flight control rods in temperature range $-55<deg>C to +150<deg>C.

实施日期：1991-01-01

BS 5827-1979

病人可移动手控升降装置规范

Spezifikation fuer fahrbare,handbetaetigte Patienten-Hebeeinrichtungen Mobile,Manually Operated Patient-Lifting Devices Specification des monte-charge mobiles et manuels pour malades

适用范围：Requirements for the mechanical safety aspects of the above devices and recommendations for the design, performance and routine maintenance testing. Includes the method of construction and testing for ...

实施日期：1979-12-31

BS 3951-2.1-1991+A5-2006

BS 5974-2010

临时安装的悬挂的脚手架和入口设备实用规程

Code of practice for the planning,design,setting up and use of temporary suspended access equipment

适用范围：This code of practice makes recommendations for the selection,design, installation, inspection, use and maintenance of temporarilyinstalled suspended access equipment/systems (TSAE), as defined inBS EN...

实施日期：2010-03-31

DIN 28083-2-1987

肘板;通过A型肘板的重力加到装置壁的最大力矩

Bracket supports; maximum bending moments imposed on the vessel wall resulting from type A bracket support loads

适用范围：The moment given in this standard apply to bracket supports with reinforcing plates (form A) according to DIN 28083 part 1 on cylindrical casings, operated without overpressure or pressurized from 0,5 ...

DIN V 74051-10-1989

牵引车和拖车之间的机械连接件.第10部分:40 mm 自动螺栓联轴器与中心轴挂车使用的附加规范

Mechanical connections between towing vehicles and trailers; automatic bolt coupling 40; additional specifications for the use with centre axle trailers

适用范围：This preliminary standard contains specification in addition to those given in DIN 74054 part 1. These additional specifications refer to the use with center axle trailers.

BS 6037-2-2004

永久性安装的入口设备的规划、设计、安装和使用的实施规程.移动梯和龙门吊

Code of practice for the planning, design, installation and use of permanently installed access equipment. Travelling ladders and gantries

适用范围：This part of BS 6037 gives recommendations for the planning, design, installation, use, examination, maintenance and testing of permanently installed travelling ladders and gantries (TLGs) including eq...

DIN EN 2498-1991

航空和航天.带自润滑层和螺纹轴以及滑动轴承可调节的杆端.尺寸和负载

Aerospace series; rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank; dimensions and loads

适用范围：This standard specifies the characteristics of adjustable rod ends consisting of: a self-aligning ball bearing with self-lubricating liner EN 2501, a rod end body with threaded shank consisting of, a c...

NF L35-172-1990

Aerospace series. Rod ends, ajustable self-aligning plain bearing with self-lubricating liner an threaded shank. Dimensions and loads.

DIN 11866-2008

Stainless steel tubes for aseptic, chemical and pharmaceutical industries - Dimensions, materials

实施日期：2008-01-01

DIN EN 3046-1994

航空用轴承的镉板,余隙类型

Aerospace series; bearings, airframe rolling; rigid single row ball bearings in steel, cadmium plated; diameter series 0 and 2; reduced clearance category; dimensions and loads; German version EN 3046:...

DIN 20622-2002

矿山用单轨架空轨道 轨道悬挂及支座和I140型钢轨的允许悬挂负荷

Suspended-monorail transport systems for mining; permissible loads for I140E rails with 140E/76 rail bonds, for rail suspensions and their abnutments and railprofile I 140 E

适用范围：This standard is valid for the calculation and determination of the permissible loads for I 140 E rails with the respective rails bonds, for rail suspensions laid down in other standards and, furthermo...

EN 4035-2006

Aerospace series. Rod ends,adjustable with self-aligning double row ball bearing in corrosion resisting steel,reduced internal radial clearance and threaded shank in titanium alloy. Dimensions and loads

实施日期：2006-05-01

ISO 2374-1983

起重机械 基本型的最大起重量范围

Lifting appliances -- Range of maximum capacities for basic models

适用范围：Sets forth the recommended range of maximum capacities of cranes from 0,1 to 1000 t. Applies to all types of cranes.

发布日期：1983-11-01  实施日期：1983-11-01

BS 1692-1998

单轮滑车规范

Specification for gin blocks

适用范围：This British Standard specifies the design, construction and testing of fibre rope gin blocks for the hoisting and lowering of loads up to 250 kg.

ISO 1496-1 AMD 5-2006

Series 1 freight containers. Specification and testing. Part 1:General cargo containers for general purposes fifth edition

实施日期：2006-05-15

BS 6464-1984

制炼厂用增强塑料管、配件和接头规范

Specification for reinforced plastics pipes, fittings and joints for process plants

适用范围：Specifies materials, properties, design calculations, manufacture, inspection, testing and installation of reinforced plastics pipelines.

EN 3284-1994

Bearings,Airframe Rolling. Rigid Single Row Ball Bearings in Steel. Diameter Series 0 and 2. Normal Clearance Category. Dimensions and Loads

实施日期：1994-01-01

NF L31-262-1994

Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel. Diameter series 8 and 9. Dimensions and loads.