ISO 6697-1994

自行车 前,后轴和飞轮 装配尺寸

Cycles -- Hubs and freewheels -- Assembly dimensions

适用范围：Gives the main dimensions for hubs and freewheels, including single-speed coaster brake hubs and multispeed gear hubs, to ensure assembly and interchangeability.

发布日期：1994-11-01  实施日期：1994-11-01

DIN 43454-2-1991

电路断路器.额定电压245kV.各极用带一般支架的断路器.终端和安装尺寸, 要求

Circuit-breaker; rated voltage 245 kV; circuit-breaker with common support frame for all poles; terminal and mounting dimensions, layout

适用范围：The standard specifies terminal and mounting dimensions as well as the layout of circuit-breakers with a rated voltage of 245 kV.

BS ISO 6020-1-2007

液压传动.16MPa(160bar)系列单杆液压缸装配尺寸.中型系列

Fluidtechnik. Hydrozylinder mit einseitiger Kolbenstange,Anschlussma?e,16-MPa-(160-bar)-Reihe. Mittlere Reihe Hydraulic fluid power. Mounting dimensions for single rod cylinders,16 MPa (160 bar) series...

适用范围：This part of ISO 6020 establishes metric mounting dimensions for medium series cylinders, 16 MPa [160 bar 1)], as required for interchangeability of commonly used hydraulic cylinders. The medium series...

实施日期：2007-10-31

DIN 81306-2003

船用折叠门的无闩插锁

Mortise-locks without bolt for hinged doors on ships

适用范围：Mortise-locks without bolt depending an this standard are for hing doors an ships. The project will contains the connecting measures and the materials the locks consists.

GB/T 28960-2012

汽车柴油机 具有水平安装面的旋装式燃油滤清器滤座 安装和连接尺寸

Automotive diesel - Heads for fuel filters with horizontal flange - Mounting and connecting dimensions

适用范围：本标准规定了柴油机旋装式燃油滤清器滤座的安装和连接尺寸。 本标准适用于装有 GB/T 28953-2012 规定的外径不大于 88 mm 的旋装式燃油滤清器。

发布日期：2012-12-31  实施日期：2013-07-01

BS ISO 6020-2-2006

液压传动.单杆液压缸装配尺寸,16MPa系列.小型系列

Fluidtechnik. Anschlussma?e für Hydrozylinder mit einseitiger Kolbenstange,16 MPa (160 bar) Reihe. Kompaktreihe Hydraulic fluid power. Mounting dimensions for single rod cylinders,16 MPa (160 bar) seri...

适用范围：This part of ISO 6020 establishes metric mounting dimensions for compact series cylinders, 16 MPa [160 bar 1)], as required for interchangeability of commonly-used hydraulic cylinders.

实施日期：2006-03-31

DIN EN 88-2-2008

Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar

实施日期：2008-03-01

BS EN 14452-2005

Devices to prevent pollution by backflow of potable water. Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20. Family D, t ype B

实施日期：2006-12-29

BS ISO 13726-2008

液压传动.内径250mm-500mm的16MPa(160bar)压实系列单杆液压缸.附属安装尺寸

Fluidtechnik. Hydrozylinder mit einseitiger Kolbenstange,kompakte 16 MPa (160-bar-)Reihe mit Bohrungen von 250 mm bis 500 mm. Einbauma?e für Zubeh?r Hydraulic fluid power. Single rod cylinders,16 MPa (...

适用范围：ISO 13726:2008 specifies the mounting dimensions required for interchangeability of accessories for 16 MPa (160 bar) compact cylinders conforming to ISO 6020-3. The accessories have been designed speci...

实施日期：2008-04-30

BS EN 60191-6-6-2001

半导体器件的机械标准化 第6-6部分:表面安装半导体器件封装外形图绘制的一般原则 细距基板栅格阵列(FLGA)的设计导则 IEC 60191-6-6:2001

Mechanische Normung von Halbleiterbauelementen. Allgemeine Regeln fuer die Erstellung von Gehaeusezeichnungen von SMD-Halbleitergehaeusen. Konstruktionsleitfaden fuer Feinraster-Land-Grid-Array (FLGA) ...

适用范围：This part of IEC 60191 provides common outline drawings and dimensions for all types of structures and composed materials of fine-pitch land grid array (hereinafter called FLGA) whose terminal pitch is...

实施日期：2001-09-05

DIN 2207-2001

刀具心轴.按DIN 2201铣床轴头配合的尺寸

Tool shanks for milling spindle noses according to DIN 2201 - Mating dimensions

适用范围：The document specifies the mating dimensions for tool shanks with morse tappers or metric tapper shanks according to DIN 228-1 to be applied in milling spindle noses according to DIN 2201.

DIN ISO 8140-2011

气压传动 1000kPa(10bar)系列缸 活塞杆端带连接环的安装尺寸

Pneumatic fluid power - Cylinders, 1000 kPa (10 bar) series - Mounting dimensions of rod-end clevises (ISO 8140:2009)

适用范围：This International Standard specifies the mounting dimensions required for interchangeability of rod-end clevises of pneumatic cylinders. The rod-end clevises have been designed specifically for use wi...

实施日期：2011-01-01

NF C93-020-2013

Capacitors and resistors for use in electronic equipment - Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components

CB/T 3317-2001

船用柱塞式液压缸基本参数与安装连接尺寸

Basic parameter and mounting connection dimension of piston type cylinder for ships

适用范围：本标准规定了船用柱塞式液压缸的基本参数与安装连接尺寸。本标准适用于以矿物基液压液为工作介质,作往复直线运动的船用柱塞式液压缸(以下简称缸)。

发布日期：2001-11-15  实施日期：2002-02-01

DIN 43657-2007

Single-post earthing switches - Rated voltage 123 kV - Terminal and mounting dimensions, layout

实施日期：2007-09-01

NF E48-016-2006

液压流体动力.16MPa(160巴)系列的单杆液压缸的装配尺寸.第2部分:小型系列

Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 2 : compact series.

NF R12-622-1987

Road vehicles. Base-mounted air compressors, single cylinder V-belt drive. Mounting dimensions.

DIN 19207-2004

用差压装置测量流量 螺纹接管和附件

Measurement of fluid flow by means of pressure differential devices - Threaded pipe end and accessories - Dimensions and requirements

适用范围：The document specifies connection size, ranges of application and materials for threaded pipe ends.#,,#

DIN 28140-1-2005

容器的排泄阀用连接件 第1部分:非合金钢、不连锈钢和涂覆钢 连接尺寸PN10

Connections for bottom discharge valves - Part 1: Non alloyed, stainless or lined steel; dimensions mating PN 10

适用范围：The project applies to the connections of bottom discharge valves of carbon steel, stainless steel and steel, with lining.

ISO 6020-2-2006

液压传动 16MPa(160bar)系列单杆缸的安装尺寸 第2部分:小型系列

Hydraulic fluid power -- Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series -- Part 2: Compact series

适用范围：ISO 6020-2:2006 establishes metric mounting dimensions for compact series cylinders, 16 MPa (160 bar), as required for interchangeability of commonly-used hydraulic cylinders.

发布日期：2006-02-01  实施日期：2006-02-01