NF H44-033-1986

气雾剂发生器 玻璃容器 １３毫米瓶口尺寸

Aerosols dispensers. Glass containers. Dimensions of finish 13 mm.

NF C93-112-19-2006

Fixed capacitors for use in electronic equipment - Part 19 : sectional specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors.

NF C53-213-1993

Semiconducteur convectors general requirements and line commutated convertors. Part 1-3 : transformers and reactors.

GB/T 10188-1988

电子设备用固定电容器 第13部分:分规范:金属箔式聚丙烯膜介质直流固定电容器

Fixed capacitors for use in electronic equipment--Part 13:Sectional specification--Fixed polypropylene film dielectric metal foil d.c. capacitors

适用范围：本标准适用于电子设备用的具有以聚丙烯膜作为介质、并以薄金属箔作电极的直流固定电容器。无线电干扰抑制用的电容器不包括在本标准中。而包括在IEC 384-14《电子设备用固定电容器，第14部分:分规范:无线电干扰抑制用固定电...

发布日期：1988-12-22  实施日期：1989-07-31

BS EN 1439-2008

Flüssiggas-Ger?te und Ausrüstungsteile. Kontrollverfahren für ortsbewegliche,wiederbefüllbare Flaschen für Flüssiggas (LPG) vor,w?hrend und nach dem Füllen LPG equipment and accessories. Procedure for checking LPG cylinders before,during and after filling Equipements pour GPL et leurs accessoires. Procédure de vérification des bouteilles transportables et rechargeables pour GPL avant,pendant et après le remplissage

实施日期：2008-03-31

BB/T 0064-2013

包装容器 钢质手提罐

Packing containers-Steel handle jerry can

适用范围：本标准规定了钢质手提罐的结构型式和分类、要求、检验方法、检验规则及标志、包装、运输和贮存等。本标准适用于罐的制造、流通、使用和监督检验。

发布日期：2013-04-25  实施日期：2013-09-01

BS EN 15202-2012

LPG equipment and accessories. Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections

发布日期：2012-05-31 

CNS 10480-1986

吹模成型塑胶容器

Blow-molded Plastic Containers

发布日期：1983-07-11  实施日期：1986-02-22

DIN 53766-1-1991

玻璃纤维增强塑料制仪器和容器的检验.粘接强度的测定

Testing of glass fibre reinforced plastics apparatus and containers; determination of adhesive strength

适用范围：This standard contains a test method, including the preparation of specimens, for the determination of the adhesive strength between the laminate and liner.

IEC 60871-1-2005

标称电压1kV以上交流电力系统用并联电容器 第1部分:总则

Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V. Part 1:General Condensateurs shunt pour réseaux. courant alternatif de tension assignée supérieure. 1 000 V. Partie 1:Génér...

实施日期：2005-07-01

IEC 61049-1991

管形荧光灯和其他放电灯线路用电容器 性能要求

Capacitors for use in tubular fluorescent and other discharge lamp circuits. Performance requirements

适用范围：Specifies the requirements for both self-healing and non-self- healing continuously rated a.c. capacitors of up to and including 2,5 kvar, and not less than 0,1 F, having a rated voltage not exceeding ...

发布日期：1991-03-19  实施日期：1991-03-19

DIN EN 284-2007

Swap bodies - Non-stackable swap bodies of class C - Dimensions and general requirements

实施日期：2007-01-01

BS EN ISO 8362-7-2010

Injektionsbeh?ltnisse und Zubeh?r. B?rdelkappen aus Aluminium-Kunststoffkombinationen für Injektionsflaschen ohne überstehendes Kunststoffteil Injection containers and accessories Part 7:Injection caps made of aluminium-plastics combinations without overlapping plastics part Récipients et accessoires pour produits injectables. Capsules d'injection en combinaison aluminium-plastique avec élément plastique non débordant

实施日期：2010-12-31

LD/T 3.4-1993(DE)

钢质压力容器制造工时定额

实施日期：1994-06-01

NF C74-365/A11-2012

Medical electrical equipment - Part 2-2 : particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories.

ASTM C148-2000(2006)

玻璃容器偏振镜检查的试验方法

Standard Test Methods for Polariscopic Examination of Glass Containers

适用范围：<p id="s00011">These two test methods are provided for evaluating the quality of annealing. These test methods can be used in the quality control of glass containers or other products made of similar ...

实施日期：2000-04-10

ISO 13274-2013

包装 危险品的运输包装 包装和中型散装容器的塑料兼容性测试

Packaging -- Transport packaging for dangerous goods -- Plastics compatibility testing for packaging and IBCs

适用范围：ISO 13274:2013 specifies the requirements and test methods for compatibility testing of plastics packagings/Intermediate Bulk Containers (IBCs) and composite packagings/IBCs with plastics inners contai...

发布日期：2013-08-01  实施日期：2013-08-01

BS EN ISO 7291-2010

气焊设备 用于不超过300bar的焊接,切割和结合工艺用汇流系统的压力调节器 替代BS EN 961:1996

Gasschwei?ger?te. Hauptstellendruckregler für Schwei?en,Schneiden und verwandte Prozesse bis 30 MPa (300 bar) Gas welding equipment. Pressure regulators for manifold systems used in welding,cutting and...

实施日期：2010-12-31

EN 12953-8-2001

Shell Boilers. Part 8:Requirements for Safeguards Against Excessive Pressure Incorporating Corrigendum May 2002

实施日期：2001-11-01

IEC 60384-18-2-2007

电子设备用固定电容器 第18-2部分:空白详细规范:非固体电解质片状铝电解固定电容器 评定水平E

Fixed capacitors for use in electronic equipment - Part 18-2: Blank detail specification - Fixed aluminium electrolytic surface mount capacitors with non-solid electrolyte - Assessment level EZ

适用范围：IEC 60384-18-2:2007 is a blank detail specification and is a supplementary document to the sectional specification and contains requirements for style, layout and minimum content of detail specificatio...

发布日期：2007-03-12  实施日期：2007-03-12