IEC 60317-36-2013

特种绕组线规范.第36部分:有粘结层的可焊接聚酰胺酯漆包圆铜绕组线.180级

Specifications for particular types of winding wires - Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer

适用范围：IEC 60317-36:2013 specifies the requirements of solderable enamelled round copper winding wire of class 180 with a dual coating. The underlying coating is based on polyesterimide resin, which may be mo...

发布日期：2013-10-14  实施日期：2013-10-14

NF Q34-030-4-2005

Tissue paper and tissue products - Part 4 : determination of tensile strength, stretch at break and tensile energy absorption.

EN 1856-1-2009

Chimneys. Requirements for metal chimneys. Part 1:System chimney products

实施日期：2009-06-01

GB 2775-1981

手控电子元件轴端尺寸

Types and dimensions of spindle ends for electronic components

IEC 60684-3-165-2004

绝缘软管 第3部分:各种型号软管的规范 活页165:阻燃、挤压聚烯烃限制火险软管

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 165: Extruded polyolefin, flame retarded, limited fire hazard sleeving

适用范围：Gives the requirements for two types of extruded polyolefin, flame retarded, limited fire hazard sleeving. Type A: Thin wall - Internal diameter up to 30 mm Type B: Thick wall - Internal diameter up to...

发布日期：2004-05-11  实施日期：2004-05-11

DIN 82340-1999

船舶的通风装置;鹅颈通风装置

Ventilation plants on ships - Gooseneck ventilators

适用范围：The document specifies gooseneck ventilators, for use in ventilation plants on ships as wether thight and/or firesafe shutter.#,,#

DIN EN 61883-6-2006

用户音频视频设备 数字接口 第6部分:音频和音乐数据传输议定书

Consumer audio/video equipment - Digital interface - Part 6: Audio and music data transmission protocol

适用范围：This part of IEC 61883 describes a protocol for the transmission of audio and music data employing IEEE 1394 and specifies essential requirements for the application of the protocol. This protocol can ...

实施日期：2006-04-01

GB/T 8897.2-2013

原电池 第2部分：外形尺寸和电性能要求

Primary batteries - Part 2: Physical and electrical specifications

适用范围：本部分规定了电池的外形尺寸、放电检验条件、放电性能要求、检验规则、检验方法、抽样和质量保证、标志。 本部分适用于所有电化学体系已标准化了的原电池。

发布日期：2013-11-12  实施日期：2014-05-01

DIN 19572-2008

Handholds for entrance into accessible manholes - Requirements, testing

实施日期：2008-10-01

GB/T 9126-2003

管法兰用非金属平垫片 尺寸

Dimensions of non-metallic flat gaskets for pipe flanges

实施日期：2003-12-01

BS ISO 2976-2005

砂布.磨料带.宽度/长度比的选择

Schleifbaender auf Unterlagen. Schleifbaender. Auswahl von Breiten/Laengen-Kombinationen Coated abrasives Abrasive belts Selection of width/length combinations Abrasifs appliques. Bandes abrasives. Sel...

适用范围：This International Standard specifies the nominal dimensions, and limit deviations of abrasive belts. It also specifies the designation and marking of these abrasive belts. This International Standard ...

实施日期：2005-05-11

EN 4466-2007

Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D less than or equal to 150 mm. Rm greater than or equal to 1 400 MPa

实施日期：2007-07-01

BS 2693-1-1956

双头螺栓.第1部分:通用双头螺拴

Schraubstifte. Spezifikation. Universalstifte Screwed Studs Part 1:General Purpose Studs Goujons visses. Specification. Goujons universels PD 2905:October 1957;PD 5722:January 1966;AMD 1876:January 30,...

适用范围：Gives general dimensions, including preferred lengths, for general purpose studs, and requirements for material, straightness and identification. Notes on recommended fitting practice also included. Li...

实施日期：1956-01-30

DIN EN 390-1995

胶合木板.尺寸、允许偏差

Glued laminated timber - Sizes - Permissible deviations; German version EN 390:1994

适用范围：The document specifies methods for determining cross sectional sizes, permissible deviations and to measure the moisture content of glued laminated timber.#,,#

ISO 9473-1-2006

纺织机械与附件 筘齿用钢带 第1部分:冷轧钢带

Textile machinery and accessories -- Strip steel for dents of reeds -- Part 1: Cold rolled strip steel

适用范围：ISO 9473-1:2006 specifies the dimensions and the designation of cold rolled strip steel used to manufacture dents of reeds according to ISO 366-1, ISO 366-2, ISO 366-3, and 366-4.

发布日期：2006-04-01  实施日期：2006-04-01

EN 1341-2012

外铺路的天然石材条板 要求和试验方法

Slabs of natural stone for external paving. Requirements and test methods

实施日期：2012-11-01

JB/T 3411.32-1999

装弹子油杯用冲子 尺寸

适用范围：　　本标准规定了装弹子油杯用冲子的型式和尺寸。

实施日期：2000-01-01

DIN 21390-1985

扁绳索用环

Thimbles for flat ropes

实施日期：1985-02-01

DIN 4185-2-2000

筛面的术语和符号.第2部分:冲孔板

Terms and symbols for screening surfaces - Part 2: Perforated plates

适用范围：The document applies to rectangular perforated plates. It applies also to perforated plates with other forms analogously.

DIN 55170-1961

台式单柱偏心压力机 结构尺寸

Open-Front Bench Type Eccentric Presses; Sizes

适用范围：Bench power presses typesBei dieser Norm handelt es sich um ein Typnormblatt (Rahmennorm), in dem nur die wesentlichen, für die jeweilige Baugr??e angegebenen Ma?e, bezogen auf ein oder zwei Hauptmerkm...