DIN EN 26891-1991

木结构.用机械紧固件的连接.强度和变形测定的一般原则

Timber structures; joints made with mechanical fasteners; general principles for the determination of strength and deformation characteristics (ISO 6891:1983); german version EN 26891:1991

适用范围：The standard contains general principles for the determination of the strength and deformation (slip) characteristics of joints made with mechanical fasteners. It is applicable to joint used in statica...

NF D90-225-2-2003

Determination of dimensional characteristics of sleeping bags - Part 2 : thickness and elastic recovery.

DIN EN 671-3-2009

Fixed firefighting systems - Hose systems - Part 3: Maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose

实施日期：2009-07-01

BS EN 1605-2013

建筑物用的隔热产品 在特殊压力负载和温度条件下变形的测定

Thermal insulating products for building applications. Determination of deformation under specified compressive load and temperature conditions

发布日期：2013-03-31  实施日期：2013-03-31

NF S61-115-2007

消防用水龙带.固定式系统用半刚性水龙带

Fire-fighting hoses - Semi-rigid hoses for fixed systems.

NF B40-332-1998

Methods of test for dense shaped refractory products. Part 10 : determination of permanent change in dimensions on heating.

NF C71-111/A4-1982

C71-111-82的补充4

BS EN ISO 75-3-2004

塑料.载荷下偏转温度的测定.第3部分:高强度热固性叠层板和长纤维增强塑料

Kunststoffe. Bestimmung der Waermeformbest?ndigkeitstemperatur. Hochfeste duroplastische Laminate und langfaserverstaerkte Kunststoffe Plastics Determination of temperature of deflection under load Par...

适用范围：This part of ISO 75 specifies a method for the determination of the temperature of deflection under load of highstrengththermosetting laminates and compression-moulded long-fibre-reinforced plastics in...

实施日期：2004-05-28

DIN ISO 1817-2008

Rubber, vulcanized - Determination of the effect of liquids

实施日期：2008-08-01

DIN EN ISO 11833-2-2006

塑料 未增塑聚氯乙烯薄板 类型、尺寸和特性 第2部分:厚度低于1 mm的薄板

Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2 : Sheets of thickness less than 1mm

实施日期：2006-06-01

EN 13381-8-2010

Test methods for determining the contribution to the fire resistance of structural members. Part 8:Applied reactive protection to steel members

实施日期：2010-04-01

DIN EN 3745-205-2003

航空和航天 飞机用光缆 试验方法 第205部分:光缆纵向尺寸的稳定性

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 205: cable longitudinal dimensional stability

NF T54-301-9-2010

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called Laminates) - Part 9 : classification and specifications for alternative core laminates.

BS EN 12617-4-2002

混凝土结构的防护和维修用产品和系统 试验方法 第4部分:收缩率和膨胀率的测定

Produkte und Systeme fuer den Schutz und die Instandsetzung von Betontragwerken. Pruefverfahren. Bestimmung des Schwindens und Quellens Products and Systems for the Protection and Repair of Concrete St...

适用范围：This European Standard specifies a method for measuring the dimensional stability (i.e. the shrinkage andexpansion movement) due to changes in the moisture content of hydraulic mortars or concretes (CC...

实施日期：2002-07-12

EN 14598-1-2005

Reinforced thermosetting moulding compounds. Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC). Part 1:Designation

实施日期：2005-04-01

DIN EN 13974-2003

刚性塑料容器 尺寸、重量和容积公差规范

Rigid plastic containers - Specification of tolerances for dimensions, weight and volume

适用范围：This European Standard specifies tolerances for dimensions, mass and volume of plastic bottles and jars with a nominal capacity up to 5 l and of plastics canisters/jerricans with a nominal volume up to...

BS EN 438-4-2005

装饰用高压层压制件(HPL).基于热固性树脂的薄板材(通常称为层压制件).第4部分:厚度为2毫米和大于2毫米的压实层压制件的分类和规范

Dekorative Hochdruck-Schichtpressstoffplatten (HPL). Platten auf Basis haertbarer Harze (Schichtpressstoffe). Klassifizierung und Spezifikationen fuer Kompakt-Schichtpressstoffe mit einer Dicke von 2 m...

适用范围：This Part of EN 438 specifies performance requirements for two types of Compact laminate (defined in Clause 4) of thickness 2 mm or greater intended for interior use. High-pressure decorative Compact l...

实施日期：2005-07-26

BS EN 13226-2009

木地板 带舌和/或榫的实木拼花地板构件

Holzfu?b?den. Massivholz-Elemente mit Nut und/oder Feder Wood flooring. Solid parquet elements with grooves and/or tongues Planchers en bois. Eléments de parquet massif avec rainures et/ou languettes

适用范围：This European Standard specifies the characteristics of solid parquet elements with grooves and/or tongues for internal use as flooring. This standard is not applicable to panels made from elements for...

实施日期：2009-06-30

ISO 175-2010

塑料 测定液体化学品对塑料影响的试验方法

Plastics -- Methods of test for the determination of the effects of immersion in liquid chemicals

适用范围：ISO 175:2010 specifies a method of exposing test specimens of plastic materials, free from all external restraint, to liquid chemicals, and methods for determining the changes in properties resulting f...

发布日期：2010-10-01  实施日期：2010-10-01

NF B53-644-2013

Wood flooring and wood paneling and cladding - Determination of dimensional stability.