NF C53-213-1993

Semiconducteur convectors general requirements and line commutated convertors. Part 1-3 : transformers and reactors.

DIN EN ISO 15785-2002

技术制图 粘接、折叠和压接的符号表示

Technical drawings - Symbolic presentation and indication of adhesive, folded and pressed joints (ISO 15785:2002)

适用范围：The standard specifies rules for presentation and indication of adhesive, fold and pressed joints on technical drawings.#,,#

BS EN 14653-2-2005

地面维护支撑用人工操纵液压支撑系统.计算或试验评定

Manuell gesteuerte hydraulische Grabenverbaugeraete. Nachweis durch Berechnung oder Pruefung Manually operated hydraulic shoring systems for groundwork support Part 2:Assessment by calculation or test ...

适用范围：This document specifies methods of calculation and test to assess the conformity of manually operated hydraulic systems for groundwork support whose performance is specified in EN 14653-1.

实施日期：2005-05-05

NF B51-078-3-2008

Wood-based panels - Characteristic values for structural design - Part 3 : Solid-wood panels.

IEC 61810-1-2008

基础机电继电器 第1部分:一般要求

Electromechanical elementary relays. Part 1:General requirements Edition 3.0

适用范围：This part of IEC 61810 applies to electromechanical elementary relays (non-specified time allor-nothing relays) for incorporation into equipment. It defines the basic functionalrequirements and safety-...

实施日期：2008-02-01

DIN EN 61169-38-2009

射频连接器 第38部分:分规范 插入式(架式应用)射频同轴连接器模型 特征阻抗50Ω(TMA型) 50Ω应用

Radio-frequency connectors - Part 38: Sectional specification - Radio frequency coaxial connectors model, slide-in (rack and panel applications) - Characteristic impedance 50 ohm (type TMA) - 50-ohm-ap...

实施日期：2009-09-01

DIN ISO 14999-4-2008

光学和光子学 光学元件和光学系统的干涉测量 第4部分:ISO 10110中指定公差的解释和评估

Optics and photonics - Interferometric measurement of optical elements and optical systems - Part 4: Interpretation and evaluation of tolerances specified in ISO 10110

适用范围：This part of ISO 14999 applies to the interpretation of interferometric data relating to the measurement ofoptical elements.This part of ISO 14999 gives definitions of the optical functions specified i...

实施日期：2008-12-01

IEC 60238-2004

爱迪生螺口灯座

Edison Screw Lampholders Douilles A Vis Edison Pour Lampes Eighth Edition

适用范围： 本标准适用于只供灯及半灯具与电源连接时使用的E14、E27和E40型爱迪生螺口匆灯座。 本标准亦适用于只在工作电压不超过250 V(有效值)的交流电路中使用的开关式灯座。 本标准亦适用于工作电压不超过25 V，串联连接...

发布日期：2004-10-14  实施日期：2004-10-01

EN 1993-1-4-2006

Eurocode 3. Design of steel structures. Part 1-4:General rules. Supplementary rules for stainless steels

实施日期：2006-10-01

IEC 60127-2 AMD 2-2010

修改件2 微型熔断器 第2部分:管式熔断体

AMENDMENT 2 Miniature fuses. Part 2:Cartridge fuse-links AMENDEMENT 2 Coupe-circuit miniatures. Partie 2:Cartouches Edition 2.0

适用范围：This amendment has been prepared by subcommittee 32C: Miniature fuses, of IEC technicalcommittee 32: Fuses.

实施日期：2010-06-01

DIN EN 1991-1-7-2010

Eurocode 1: Actions on structures - Part 1-7: General actions - Accidental actions; German version EN 1991-1-7:2006 + AC:2010

实施日期：2010-12-01

NF F42-123-4-1999

Railway applications - Fixed installations - D.C. switchgear - Part 4 : outdoor d.c. in-line switch-disconnectors and d.c. earthing switches.

EN 50423-2-2005

Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV Part 2: Index of National Normative Aspects

DIN EN 12369-3-2009

Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels

实施日期：2009-02-01

NF E31-356/IN1-2008

Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 oC.

DIN 19655-2008

Irrigation - Tasks, fundamental principles, planning and methods

实施日期：2008-11-01

NF P19-102-2003

Prefabricated reinforced components of lightweight aggregate concrete with open structure.

IEC 62271-209-2007

高压开关设备和控制设备 第209部分:额定电压52kV以上用气体绝缘金属封闭型开关设备的电缆连接件 充液型和干型电缆终端

High-voltage switchgear and controlgear - Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-fi...

适用范围：This standard covers the connection assembly of fluid-filled and extruded cables to gas-insulated metal enclosed switchgear (GIS), in single- or three-phase arrangements where the cable-terminations ar...

发布日期：2007-08-09  实施日期：2007-08-09

DIN EN 1993-4-2-2010

Eurocode 3: Design of steel structures - Part 4-2: Tanks; German version EN 1993-4-2:2007 + AC:2009

实施日期：2010-12-01

ISO 5458-1998

产品几何量技术规范(GPS)--几何公差--位置公差标注

Geometrical Product Specifications (GPS) -- Geometrical tolerancing -- Positional tolerancing

发布日期：1998-12-01  实施日期：1998-12-01