DIN 22261-3-2006

露天褐煤矿用挖掘机和布料机及辅助设备 第3部分:焊接连接 接头形式,分级和试验指南

Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 3: Welded connections, joint types, classification, test instruction

实施日期：2006-11-01

DIN EN ISO 284-2013

输送带 导电率 规范和试验方法

Conveyor belts - Electrical conductivity - Specification and test method (ISO 284:2012); German version EN ISO 284:2012

实施日期：2013-04-01

DIN EN ISO 22721-2010

输送带 地下采矿用橡胶或塑料覆盖的织物结构输送带规范

Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining

适用范围：This International Standard specifies requirements for rubber- or plastics-covered conveyor belting of textile construction for underground mininig on flat or troughed idlers. It is not applicable to l...

实施日期：2010-01-01

BS EN ISO 505-2000

输送带.织物输送带抗撕裂扩展性的测定方法

Conveyor belts. Method for the determination of the tear propagation resistance of textile conveyor belts

适用范围：This Standard specifies a method of test for the measurement of the propagation resistance of an initial tear in textile conveyor belts, either in full thickness or of the carcass only. This test is in...

MT 654-1997

煤矿用带式输送机安全规范

适用范围：本标准规定了煤矿用带式输送机(以下简称输送机)设计、制造、安装、使用和维护的安全要求。 本标准主要适用于煤矿井下用带式输送机，也适用于有爆炸性危险的露天煤矿、选煤等工作场所用带式输送机。

实施日期：1998-04-01

DIN 22109-1-2000

矿用织物运输带.第1部分:单层带.尺寸、要求

Conveyor belts with textile plies for coalmining; PVG- or PVC-monoply belts for underground applications; dimensions, requirements

适用范围：The document concerns to textile monoply belts used in underground coalmining. It specifies dimensions and the requirements for these belts.

DIN 22117-1988

煤矿用输送带.氧气指数的测定

Conveyor belts for coalmining; determination of the oxygen index

适用范围：The determination of the oxygen index serves as an expeditions statement and control of identity as to new applied conveyor belts in coalmining concerning quality and material composition.

MT/T 645-1997

煤矿用带式输送机滚筒与相邻槽形托辊组之间的距离计算公式

Conveyor belts-Formula for transition distance on three equal length idler rollers-For coal mining

适用范围：本标准规定了煤矿用带式输送机滚筒与相邻槽形托辊组之间的距离计算公式。 本标准适用于煤矿用带式输送机，也适用于选煤等作业场所用带式输送机滚简与相邻槽形托辊组之间的距离计算。

实施日期：1998-04-01

GB/T 20021-2005

帆布芯耐热输送带

Heat resistant conveyor belts of duck construction

适用范围：本标准规定了在平形或槽形托辊上使用的帆布芯耐热输送带(以下简称耐热带)的产品分类、要求、试验方法，检验规则，标志、包装、贮存和运输。　　本标准适用于可耐试验温度分别为不大于100℃、125℃、150℃和175℃的帆布芯耐热输送带。

发布日期：2005-09-15  实施日期：2006-05-01

DIN EN ISO 8094-2013

钢缆输送机皮带.缆索芯线涂层粘合强度试验

Steel cord conveyor belts – Adhesion strength test of the cover to the core layer (ISO 8094:2013)

发布日期：2013-11-01  实施日期：2013-11-01

BS 3810-2-1965

材料装卸用术语词汇.第2部分:与输送机及提升机(气动和液压装卸除外)有关的术语

Begriffe aus dem Gueterumschlag. Begriffe in Verbindung mit Foerderanlagen und Aufzuegen (ausgenommen pneumatischer und hydraulischer Umschlag) Glossary of Terms Used in Materials Handling Part 2:Terms...

适用范围：BRITISH STANDARD GLOSSARY OF TERMS USED IN MATERIALS HANDLING Part 2. Terms used in connection with conveyors and elevators (excluding pneumatic and hydraulic handling) SECTION ONE : BULK MATERIALS A. ...

实施日期：1965-12-31

JB/T 9015-1999

带式输送机用逆止器

Backstop for belt conveyer

适用范围：本标准规定了逆止器的术语,基本参数,技术要求,试验方法,检验规则,标志、包装和贮存。本标准适用于带式输送机所用的非接触式逆止器.用于其他场合的非按触式逆止器亦应参照使用。

实施日期：2000-01-01

DIN 22109-4-2000

矿用织物运输带.第4部分:双层地面用橡胶带.尺寸、要求

Conveyor belts with textile plies for coalmining; rubber belts with two plies for above ground; dimensions, requirements

适用范围：The document concerns to rubber belts with two textile plies used in hard coal preparation plants. It specifies dimensions and the requirements for these belts.

EN ISO 340-2013

输送带 实验室规模的阻燃特性 试验方法和要求

Conveyor belts. Laboratory scale flammability characteristics. Requirements and test method

实施日期：2013-04-01

GB 996-1977

TD型带式输送机车式拉紧装置 基本参数与尺寸

Trolley type belt tighteners for type TD belt conveyor--Specifications

NF H95-103-1977

传送带安全规程 滚动保护装置的示例

Continuous mechanical handling equipment. Safety code for belt conveyors. Examples for safety of nip points.

实施日期：1977-02-01

MT/T 529-1995

煤矿用伸缩带式输送机参数

适用范围：本标准规定了煤矿用伸缩带式输送机系列的基本参数。适用于煤矿井下输送煤岩物料、机身可伸缩、电气系统具有隔爆性能的伸缩带式输送机。

发布日期：1906-06-08  实施日期：1996-05-01

BS EN ISO 16851-2004

Textile conveyor belts. Determination of the net length of an endless (spliced) conveyor belt

实施日期：2005-01-25

GB/T 990-1991

带式输送机 托辊 基本参数与尺寸

Belt conveyor iidlers--Basic parameters and dimensions

适用范围：本标准规定了托辊的直径、长度、轴径等基本参数与尺寸。本标准适用于输送散状物料或成件物品用带式输送机。

发布日期：1991-02-04  实施日期：1992-01-01

ISO 3870-1976

带轮中心距长达 300米的输送松散物料用的输送带 (织物骨架型).拉紧装置调节

Conveyor belts (fabric carcass), with length between pulley centres up to 300 m, for loose bulk materials -- Adjustment of take-up device

适用范围：Describes fixed and automatic take-up devices. Contains recommendations for adjustment values which are valid for the most commonly used belts. Tabulates various types of take-up devices with relation ...

发布日期：1976-11-01  实施日期：1976-11-01