NF L21-414-1996

Aerospace series. Rivets, solid, universal head, in heat resisting nickel base alloy ni-P11, cadmium plated, inch based series.

BS 5395-1-2010

Stairs. Part 1:Code of practice for the design of stairs with straight flights and winders

实施日期：2010-02-28

EN 3307-1996

Aerospace Series. Screws,Pan Head,Offset Cruciform Recess,Threaded to Head,in Titanium Alloy,Anodized,MoS2 Lubricated. Classification:1 100 MPa (at Ambient Temperature)/315 Degrees C

实施日期：1996-09-01

GB/T 5826.1-1986

平开钢门基本尺寸系列(32、40mm实腹料)

Basic size system of side hung steel door ( 32, 40mm solid section)

适用范围：本标准适用于一般民用和工业建筑，供没计、制造选用;并与有关玻璃尺寸、钢窗型材及五金零件等配套使用。

发布日期：1986-01-31  实施日期：1986-11-01

BS EN 12600-2002

建筑玻璃 摆锤式试验 冲击试验方法和平面玻璃分类

Glass in building. Pendulum test. Impact test method and classification for flat glass. Pendulum test. Impact test method and classification for flat glass

适用范围：This European Standard specifies a pendulum impact test method for single flat panes of glass for use in buildings.The test is intended to classify flat glass products in three principal classes by per...

实施日期：2003-01-09

NF C90-201-1-2002

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1 : general requirements, frequency bands and electromagnetic disturbances.

EN ISO 3954-2007

Powders for powder metallurgical purposes. Sampling

实施日期：2007-09-01

DIN EN 60068-2-69-2007

Environmental testing - Part 2-69: Tests - Test Te: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method (IEC 60068-2-69:2007)

实施日期：2007-11-01

DIN 1831-2-1990

镶刀片的三面刃铣刀 交货技术条件

Inserted tooth side and face milling cutters; technical delivery consitions

适用范围：The information on designation, dimensions, tolerances, material, design and marking included in the technical delivery conditions apply to side-and-face milling cutters with inserted cutting blades ac...

SY/T 6474-2000

新套管、油管和平端钻杆现场检验方法

实施日期：2000-10-01

GB 2680-1981

平板玻璃可见光总透过率测定方法

Sheet glass-Determination of transmittancy of visible rays

DIN EN 14620-3-2006

Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0℃ and -165℃ - Part 3: Concrete components; German version EN 14620-3:2006

实施日期：2006-12-01

NF C93-349-1998

Measuring method for the level of intermodulation products generated in ?gyromagnetic device.

NF M08-035-2004

Crude petroleum and petroleum products - Bulk cargo transfer - Guidelines for archieving the fullness of pipelines.

FZ/T 95013-1999

平网印花机

适用范围：本标准规定了平网印花机的产品分类、要求、试验方法、检验分类及标态气包装、运输、贮存。本标准适用于机织或针织的棉、毛、麻、丝、化纤及其混纺织物印花用的平网印花机。

实施日期：1999-07-01

IEEE C37.99-2012

Guide for the Protection of Shunt Capacitor Banks

实施日期：2012-12-05

EN 10140-2006

Cold rolled narrow steel strip. Tolerances on dimensions and shape

实施日期：2006-07-01

NF C96-541-5-2010

Organic Light Emitting Diode (OLED) displays - Part 5 : environmental testing methods.

GB/T 23803-2009

石油和天然气工业 海上生产平台管道系统的设计和安装

Petroleum and natural gas industries-Design and installation of piping systems on offshore production platforms

适用范围：本标准给出了石油和天然气工业海上生产平台新建管道系统的设计和安装的最低要求和指南。管道系统的最高压力高达69000kPa(G)，在温度范围内对材料的要求满足ASME B31.3的要求。

发布日期：2009-05-13  实施日期：2009-12-01

DIN EN 572-8-2004

建筑玻璃 基本钠钙玻璃制品 第8部分:交货和最终切割尺寸

Glass in building - Basic soda lime silicate glass products - Part 8: Supplied and final cut sizes