DIN 7604-1992

外六角螺堵,轻型结构,圆柱螺纹

Light-duty hexagon head screw plugs

BS EN ISO 13341-2010

Gasflaschen. Eindrehen von Ventilen in Gasflaschen Gas cylinders. Fitting of valves to gas cylinders Bouteilles. gaz. Montage des robinets sur les bouteilles. gaz

实施日期：2010-12-31

NF E03-004-2-2005

Pipe threads where pressure tight joints are made on the threads - Part 2 : taper external threads and taper internal threads - Dimensions, tolerances and designation.

EN ISO 228-2-2003

Pipe threads where pressure-tight joints are not made on the threads. Part 2:Verification by means of limit gauges

实施日期：2003-02-26

BS EN ISO 228-2-2003

螺纹上无压力密闭接头的管子螺纹 第2部分:极限量规进行验证 连同BS EN ISO 228-1:2003,替代BS 2779:1986

Rohrgewinde fuer nicht im Gewinde dichtende Verbindungen. Pruefung mit Grenzlehren Pipe threads where pressure-tight joints are not made on the threads Part 2:Verification by means of limit gauges File...

适用范围：This part of IS0 228 specifies the verification, by means of limitgauges, of cylindrical threads, the dimensions and tolerancesof which are given in IS0 228-l.For industrial applications (see for examp...

实施日期：2003-02-26

DIN EN ISO 15245-1-2003

气瓶 连接气瓶阀的平行螺纹 第1部分:规范

Gas cylinders; Parallel threads for connection of valves to gas cylinders; Part 1: Specification

适用范围：This part of ISO 15245 specifies definitions, dimensions and tolerances of parallel screw threads of nominal diameter 30 mm (designated 30P), 25 mm (designated 25P) and 18 mm (designated 18P), for the ...

实施日期：2003-01-01

DIN EN ISO 13341-2011

Gas cylinders. Fitting of valves to gas cylinders (ISO 13341:2010); German version EN ISO 13341:2010

ISO 15245-2-2001

气缸 连接阀门与气缸的平行线 第2节:仪表检查

Gas cylinders. Parallel threads for connection of valves to gas cylinders. Part 2:Gauge inspection first edition

适用范围：This part of ISO 15245 specifies types, dimensions and principles of use of gauges to be used in conjunction with the sealing systems of the parallel threads specified in ISO 15245-1. The threads thems...

实施日期：2001-10-15

JIS B4445-1998

圆柱管螺纹丝锥

Hand taps for parallel pipe threads

适用范围：この規格は，呼びG1/16～G4の管用平行ねじのねじ立てに用いる管用平行ねじ用タップ(以下，タップという。)について規定する。

DIN 158-2-1997

附有圆柱形内螺纹的米制锥形外螺纹.第2部分:量规系统、量规使用、量规尺寸的计算和标记

Metric external taper screw thread and mating internal parallel screw threads - Part 2: Gauging system, use of gauges, calculation of gauge dimensions and general features

适用范围：The document defines a gauging system on threads according to DIN 158-1.

EN ISO 22434-2011

Transportable gas cylinders. Inspection and maintenance of cylinder valves

实施日期：2011-03-01

EN 10226-1-2004

Pipe threads where pressure tight joints are made on the threads. Part 1:Taper external threads and parallel internal threads. Dimensions,tolerances and designation

实施日期：2004-07-01

JIS B0202-1999

圆柱管螺纹

Parallel pipe threads

适用范围：この規格は，管用(<上1>)平行ねじについて規定したもので，管，管用部品，流体機器などの接合において，機械的結合を主目的とするねじ(<上2>)に適用する。なお，ねじの呼びPF1/8-PF6の管用平行めねじR級，及びPF7-PF12の管用平行ねじは，附属書(規定)による。注(<上1>)“くだよう”と読む...

JIS B1111-1996

十字槽螺钉

Cross recessed head screws

适用范围：この規格は，一般に用いろ鋼製の十字穴付き小ねじ(以下，鋼小ねじとい。)，ステンレス鋼製の十字穴付き小ねじ(以下，ステンレス小ねじという。)及び非鉄金属製の十字穴付き小ねじ(以下，非鉄金属小ねじという。)について規定する。備考1.鋼小ねじ，ステンレス小ねじ及び非鉄金属小ねじを総称する場...

DIN 71428-1989

非焊接带双锥形环垫的螺旋联管节. 使用外套螺母的圆柱形螺纹旋入的接管

Compression couplings with olives; cylindrical thread nipples for use with union nuts

CNS 4847-1982

六角承窝管塞(具肩部与平行螺纹)

Hexagon Socket Pipe Plugs with Shoulder and Parallel Thread

发布日期：1979-05-23  实施日期：1982-10-12

JIS B1101-1996

一字槽螺钉

Slotted head screws

ISO 5408-2009

螺纹 词汇表

Screw threads -- Vocabulary

适用范围：ISO 5408:2009 specifies the fundamental terms and definitions for screw threads. These terms are applicable to symmetrical threads and unsymmetrical threads, or cylindrical threads and taper threads.

发布日期：2009-06-01  实施日期：2009-06-01

ISO 965-1-1998

ISO一般用途米制螺纹 公差 第1部分:原则和基本数据

ISO general-purpose metric screw threads -- Tolerances -- Part 1: Principles and basic data

发布日期：1998-12-01  实施日期：1998-12-01

DIN 382-2009

Hexagonal die-nuts

实施日期：2009-12-01