DIN 95367-1998

弹性构件.屋顶构件,A型和B型

Elastomer mounts - Roof mounts, types A and B

适用范围：The document applies to elastomer mounts, types roof mounts to be used at ambient temperatures of -30 ?to 70 ?#,,#

DIN V 65900-17-2001

航空航天系列.O形环槽.O形环槽设计准则.基本计算

Aerospace series - O-ring grooves - Design criteria for O-ring grooves, basic calculations (AECMA Technical Report TR 4271:2000)

适用范围：The document provides: the design criteria recommended for the housing definition for o-rings as specified in ISO 3601-1; a calculation method to formulate dimensions of the housing for which the near ...

DIN EN 12316-2-2013

Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing; German version EN 12316-2:2013

发布日期：2013-08-01  实施日期：2013-08-01

DIN EN 2602-2007

Aerospace series - Ports for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2602:2005

实施日期：2007-04-01

ISO 4665-2006

硫化橡胶和热塑性橡胶 耐风蚀性能

Rubber, vulcanized or thermoplastic -- Resistance to weathering

适用范围：ISO 4665:2006 specifies methods for the exposure of vulcanized or thermoplastic rubbers to natural or artificial weathering and methods for the determination of changes in colour, appearance and physic...

发布日期：2006-10-01  实施日期：2006-10-01

EN 2428-1995

Aerospace Series Ethylene-Propylene Rubber (EPM/EPDM) Hardness 50 IRHD

实施日期：1995-01-01

BS EN ISO 14910-1-2013

塑料 模塑和挤塑用热塑聚酯/酯和聚醚/酯弹性体 命名系统和基本规范

Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Designation system and basis for specification

发布日期：2013-04-30  实施日期：2013-04-30

NF L43-217-2006

Aerospace series - Port ends for adaptors, threaded, with lockring - Geometric configuration.

ISO 1629 AMD 1-2007

橡胶和胶乳 专用语 修改件1

Rubber and latices. Nomenclature. Amendment 1

适用范围：The standard is about Rubber and latices — Nomenclature;AMENDMENT 1

实施日期：2007-12-15

NF E63-134-2008

Tools for pressing - Elastomer pressure springs - Part 1 : general specification.

EN ISO 1179-2-2008

Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing. Part 2:Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)

实施日期：2008-04-01

NF T47-290-1-2013

Hose fittings with clamp units - Part 1 : requirements, types of fixing and connection, designation and testing

ISO 21606-2007

牙科 畸齿矫正用弹性辅助材料

Dentistry -- Elastomeric auxiliaries for use in orthodontics

适用范围：ISO 21606:2007 is applicable to all elastomeric auxiliaries including orthodontic elastics, elastomeric bands, chains, links, thread and ligatures used for orthodontics both inside and outside the mout...

发布日期：2007-06-01  实施日期：2007-06-01

DIN EN 2603-2007

Aerospace series - Port ends for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2603:2005

实施日期：2007-04-01

ISO 14359-1997

冬季运动设备 聚合材料制部件的标志

Winter-sports equipment -- Marking of parts made of polymer materials

发布日期：1997-03-01  实施日期：1997-03-01

BS EN ISO 9974-3-2000

普通和液力用连接器.用ISO 261螺纹的弹性或金属与金属间密封的气门和双头螺栓端头.(B型)金属与金属间密封的双头螺栓端头

Leitungsanschluesse fuer FLuidtechnik und allgemeine Andwendung. Einschraubloecher und Einschraubzapfen mit Gewinde nach ISO 261 und Elastomerdichtung oder metallener Dichtkante. Einschraubzapfen mit m...

适用范围：This part of ISO 9974 specifies dimensions, perform-ance requirements and test procedures for heavy-duty (S series), light-duty (L series) and extra-light-duty (LL series) stud ends with ISO 261 thread...

实施日期：2000-08-15

ISO 2528-1995

薄页材料 水蒸气透温度的测定 重量法

Sheet materials -- Determination of water vapour transmission rate -- Gravimetric (dish) method

适用范围：Specifies a method for the determination of the water vapour transmission rate of sheet materials. Not applicable to film materials that are damaged by hot wax or that shrink under the test conditions....

发布日期：1995-08-01  实施日期：1995-08-01

DIN 83419-1987

挡盖的成型弹性体密封环

Elastomer gaskets for covers

适用范围：This standard specifies gaskets of trapezoidal cross-section for hinged or bolted covers. These gaskets are inserted in dovetail grooves in the covers. Depending on the breadth of the sealing surface o...

ISO 10069-2-2008

压制工具 弹性体压缩弹簧 第2部分:附件规范

Tools for pressing -- Elastomer pressure springs -- Part 2: Specification of accessories

适用范围：ISO 10069-2:2008 specifies the dimensions, in millimetres, of spring collars and pilot pins intended for use in press tools together with elastomer pressure springs in accordance with ISO 10069-1. ISO ...

发布日期：2008-08-01  实施日期：2008-08-01

ISO 48-2010

硫化橡胶或热塑性橡胶 硬度的测定(硬度在10IRHD和100IRHD之间)

Rubber, vulcanized or thermoplastic -- Determination of hardness (hardness between 10 IRHD and 100 IRHD)

适用范围：ISO 48:2010 specifies four methods for the determination of the hardness of vulcanized or thermoplastic rubbers on flat surfaces (standard-hardness methods) and four methods for the determination of th...

发布日期：2010-09-01  实施日期：2010-09-01