BS 5S 99-1994

Specification for 2.5 % nickel-chromium-molybdenum (high carbon) steel billets,bars,forgings and parts (1230-1420 MPa:limiting ruling section 150 mm)

实施日期：1994-01-15

DIN EN ISO 898-1-2013

碳钢和合金钢制紧固件的机械性能 第1部分:带指定特性的螺栓、螺钉和螺柱 粗牙螺纹和细牙螺纹

Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1: Bolts, screws and studs with specified property classes – Coarse thread and fine pitch thread (ISO 898-1:2013)

实施日期：2013-05-01

BS 4A 111-1993

Specification for cadmium-plated steel bolts (Unified hexagons and Unified threads) with close tolerance shanks

实施日期：1993-01-01

ISO 898-1-2009

碳钢和合金钢制紧固件的机械性能 第1部分:带指定特性的螺栓、螺钉和螺柱 粗牙螺纹和细牙螺纹

Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs with specified property classes -- Coarse thread and fine pitch thread

适用范围：ISO 898-1:2009 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners — th...

发布日期：2009-04-01  实施日期：2009-04-01

DIN EN 10222-4-2001

压力目的用钢锻件.第4部分:具有高极限强度的细晶粒可焊接的钢锻件

Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength; German version EN 10222-4:1998

DIN EN 10222-5-2000

压力目的用钢锻件.第5部分:马氏、奥氏和奥氏-铁素体不锈钢

Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels; German version EN 10222-5:1999

适用范围：The document deals with steel forgings for pressure purposes.

NF S94-054-1997

Implants for surgery. Metallic materials. Part 4 : cobalt-chromium-molybdenum casting alloy.

EN 10222-5-1999

Steel Forgings for Pressure Purposes. Part 5:Martensitic,Austenitic and Austenitic-Ferritic Stainless Steels

实施日期：1999-12-01

BS EN 10325-2006

Stahl. Bestimmung der Streckgrenzenerhoehung durch Waermebehandlung (Bake-Hardening-Index) Steel Determination of yield strength increase by the effect of heat treatment [Bake-Hardening-Index] Aciers. Determination de l'augmentation de la limite apparente d'elasticite due a un traitement thermique (index de durcissement a la cuisson [Bake-hardening])

实施日期：2006-09-29

BS EN 2094-1992

AL-P 7009-T74铝合金.3mm≤a≤150mm模锻件

Aluminiumlegierung AL-P7009-T74. Gesenkschmiedestuecke 3 mm = a = 150 mm Aluminium Alloy AL-P7009-T74 Die Forgings 3 mm Less Than or Equal to a Less Than or Equal to 150 mm Alliage d'aluminium AL-P7009...

适用范围：This standard specifies the requirements relating to die forgings in aluminium alloy AL-P7009-, for use in the T74 <up1)> condition, 3 mm ≤ a ≤ 150 mm, for aerospace applications. note:1) Formerly desi...

实施日期：1992-01-01

BS EN 10314-2002

高温下钢保证强度最小值的运算方法

Verfahren zur Ableitung von Mindestwerten der Dehngrenze von Stahl bei erhoehten Temperaturen Method for the derivation of minimum values of proof strength of steel at elevated temperatures Methode de ...

适用范围：This European Standard specifies a method for deriving the minimum proof strength valuesfor steels at elevated temperatures.However, this standard does not specify a verification procedure.

实施日期：2002-11-27

BS EN 2385-1992

AL-P7009-T74511铝合金.a或D≤125mm的挤压棒材和型材

Aluminiumlegierung AL-P7009-T74511. Stranggepresste Stangen und Profile a oder D = 125 mm Aluminium Alloy AL-P7009-T74511 Extruded Bars and Sections a or D Less Than or Equal to 125 mm Alliage d'alumin...

适用范围：This standard specifies the requirements relating to extruded bars and sections in aluminium alloy AL-P7009-, for use in the T74511 <up1)> condition, a or D ≤125 mm, for aerospace applications. This st...

实施日期：1992-01-01

BS 4A 112-1992

Specification for cadmium-plated steel shear bolts (Unified hexagons and Unified threads)

DIN ISO 5832-6-2001

外科植入物.金属材料.第6部分:锻造钴-镍-铬-钼合金

Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy

BS EN 2127-1992

AL-P7075-T73511铝合金.a或D≤100mm的挤压棒材和型材

Aluminiumlegierung AL-P7075-T73511. Stranggepresste Stangen und Profile a oder D = 100 mm Aluminium Alloy AL-P7075-T73511 Extruded Bars and Sections a or D Less Than or Equal to 100 mm Alliage d'alumin...

适用范围：This standard specifies the requirements relating to extruded bars and sections in aluminium alloy AL-P7075-, for use in the T73511 <up1)> condition, a or D ≤100 mm, for aerospace applications. T...

实施日期：1992-01-01

BS EN 10209-1996

搪瓷用的冷轧低碳钢板制品.交货技术条件

Kaltgewalzte Flacherzeugnisse aus weichen Staehlen zum Emaillieren. Technische Lieferbedingungen Cold-Rolled Low Carbon Steel Flat Products for Vitreous Enamelling-Technical Delivery Conditions (V) Pro...

适用范围：This European Standard applies to cold rolled non-coated low carbon steel flat products in rolled widths equal to or over 600 mm and in thicknesses equal to or less than 3 mm, delivered in sheet, wide ...

实施日期：1996-01-01

BS EN 2636-1994

铝合金AL-P6082-T6.挤压棒材和型材.a/D≤200mm,周边粗粒控制

Aluminium legierung AL-P6082-T6. Stranggepresste Stangen und Profile a oder D = 200 mm mit Kontrolle der Grobkornrandzone Aluminium Alloy AL-P6082-T6 Extruded Bars and Sections a or D Less Than or Equa...

适用范围：This standard specifies the requirements relating to extruded bars and sections in aluminium alloy, AL-P6082-, for use in the T6 condition, a or D ≤200 mm, with peripheral coarse grain control, for aer...

实施日期：1994-01-01

BS 4A 4-1966

Test Pieces and Test Methods for Metallic Materials for Aircraft (AMD 7710) June 15,1993 (S) Amd 2;

实施日期：1966-01-01

NF L10-007-002-2006

Aerospace series - Metallic materials - Test methods - Part 002 : tensile testing at elevated temperature.

BS AU 210-2-1994

Drawbars for caravans and light trailers. Specification for the design of aluminium drawbars and chassis