BS 1363-4-1995+A4-2012

13A 插头、插座和适配器.第4部分:13A 熔融连接组合开关设备和非开关设备规范

13 A plugs,socket-outlets, adaptors and connection units —Part 4: Specification for 13 A fused connection units switched and unswitched

BS 3G 100-2.3.2-1970

Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Temperature-pressure requirements

QJ 2038.2-1991

固体火箭发动机燃烧室界面粘接强度测试方法 剪切法

发布日期：1991-01-24  实施日期：1991-08-31

DL/T 846.7-2004

高电压测试设备通用技术条件 第7部分：绝缘油介电强度测试仪

General technical specifications for high voltage test equipments Part 7:dielectric strength detector of insulating oils

适用范围：DL/T 846的本部分规定了绝缘油介电强度测试仪的产品分类、技术要求、试验方法、检验规则、包装、运输、储存等。本部分适用于绝缘油介电强度测试仪。该测试仪主要用于电力、石油、化工等部门进行绝缘油的介电强度测试。

实施日期：2004-06-01

IEC 60512-9-3-2011

电子设备用连接器 试验和测量 第9-3部分:耐久性试验 试验9c:带电力负载的机械操作(啮合/分离)

Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging and separating) with electrical load

适用范围：IEC 60512-9-3:2011 defines a standard test method to assess the mechanical and electrical operational endurance, i.e. engaging and separating cycles, of a connector in an operating mode which includes ...

发布日期：2011-06-22  实施日期：2011-06-22

NF P19-126-2-2010

Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test - Part 2 : long term test.

BS G 198-5-1997

Huellen fuer elektrische Raumfahrtkabel und Zubehoerkabel. Spezifikation fuer hitzeeinlaufende Gussformen Sleeves and moulded components for aircraft electric cables and equipment wires. Part 5:Specification for heat shrinkable moulded shapes Manchons de cables electriques pour avions et fils electriques d'equipement. Specification des formes moulees thermoretractables AMD 15961:November 16,2005

实施日期：1997-08-15

BS EN 62137-1-4-2009

Oberfl?chenmontage-Technik. Verfahren zur Prüfung auf Umgebungseinflüsse und zur Prüfung der Haltbarkeit von Oberfl?chen-L?tverbindungen. Zyklische Biegeprüfung Surface mounting technology-Environmental and endurance test methods for surface mount solder joint-Part 1-4:Cyclic bending test Technologie de montage en surface. Méthodes d'essais d'environnement et d'endurance des joints brasés montés en surface. Essai de flexion cyclique

实施日期：2009-03-31

BS EN 60076-3-2013

电力变压器 绝缘级，绝缘试验和外部气隙

Power transformers. Insulation levels,dielectric tests and external clearances in air

发布日期：2013-12-31  实施日期：2013-12-31

SJ 451-1973

高压整流管整流强度的测试方法

Methods of measurement for rectifying strength of high-voltage rectifier tubes

适用范围：本标准适用于真空高压整流管和脉冲整流管整流强度的测试。测试整流强度的测试条件应符合SJ 442-73。

发布日期：1973-02-26  实施日期：1973-07-01

ASTM D1781-1998(2012)

Standard Test Method for Climbing Drum Peel for Adhesives

实施日期：1998-04-10

ASTM C192/C192M-2013a

混凝土试样的实验室制备及养护规程

Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory

BS EN 62137-1-5-2009

Oberfl?chenmontage-Technik. Verfahren zur Prüfung auf Umgebungseinflüsse und zur Prüfung der Haltbarkeit von Oberfl?chen-L?tverbindungen. Prüfung der Ermüdung durch mechanische Scherbeanspruchung Surface mounting technology. Environmental and endurance test methods for surface mount solder joints. Part 1-5:Mechanical shear fatigue test Technologie du montage en surface. Méthodes d'essais d'environnement et d'endurance des joints brasés montés en surface. Essai de fatigue par cisaillement mécaniq

实施日期：2009-07-31

DIN EN 1447-2011

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure; German version EN 1447:2009+A1:2010

实施日期：2011-01-01

IEC 61747-6-3-2011

液晶显示器 第6-3部分:液晶显示模块测量方法 有源矩阵液晶显示模块的运动伪影测量

Liquid crystal display devices - Part 6-3: Measuring methods for liquid crystal display modules - Motion artifact measurement of active matrix liquid crystal display modules

适用范围：IEC 61747-6-3:2011 applies to transmissive type active matrix liquid crystal displays. This standard defines general procedures for quality assessment related to the motion performance of LCDs. It defi...

发布日期：2011-07-13  实施日期：2011-07-13

BS EN 60598-2-24-1999

灯具 第2-24部分:特殊要求 第24分册:限制表面温度的灯具 IEC 60598-2-24:1997,修正

Leuchten. Besondere Anforderungen. Leuchten mit begrenzter Oberflaechentemperatur Luminaires-Part 2:Particular Requirements-Section 24:Luminaires with Limited Surface Temperatures Luminaires. Regles pa...

适用范围：Luminaires intended for use where the necessity of limited temperature on the outer surface exists, due to the risk of combustible dust accumulating on the luminaires, but where the risk of explosion i...

实施日期：1999-04-15

IEC 61747-30-1-2012

液晶显示器件 第30-1部分:液晶显示模块的测量方法 透射式

Liquid crystal display devices - Part 30-1: Measuring methods for liquid crystal display modules - Transmissive type

适用范围：IEC 61747-30-1:2012 is restricted to transmissive liquid crystal display-modules using either segment, passive or active matrix and achromatic or colour type LCDs. Furthermore, the transmissive modes o...

发布日期：2012-06-25  实施日期：2012-06-25

NF L52-250-302-2006

Aerospace series - Cable, electrical, aircraft use - Test methods - Part 302 : voltage proof test.

ASTM D3807-1998(2012)

Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics)

实施日期：1998-05-10

DIN EN 3475-418-2009

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 418: Thermal endurance for conductors

实施日期：2009-05-01