DIN 53766-1-1991

玻璃纤维增强塑料制仪器和容器的检验.粘接强度的测定

Testing of glass fibre reinforced plastics apparatus and containers; determination of adhesive strength

适用范围：This standard contains a test method, including the preparation of specimens, for the determination of the adhesive strength between the laminate and liner.

CNS 8150-1981

纺织品缝合强力检验法

Methods of Test for Seam Strength of Clothes

发布日期：1981-11-23  实施日期：1981-11-23

BS EN 45502-1-1998

活性可植入医疗装置.制造商提供的安全,标记和信息的一般要求

Aktive implantierbare medizinische Geraete. Allgemeine Festlegungen fuer die Sicherheit,Aufschriften und vom Hersteller zur Verfuegung zu stellende Informationen Active Implantable Medical Devices Part...

适用范围：This Part 1 of EN 45502 specifies requirements that are generally applicable to ACTIVE IMPLANTABLE MEDICAL DEVICES. For particular types of ACTIVE IMPLANTABLE MEDICAL DEVICES, these essential requireme...

实施日期：1998-02-15

GB/T 7121.2-2008

农林轮式拖拉机防护装置强度试验方法和验收条件 第2部分：后置式动态试验方法

The strength testing method and accepting condition of the protective structures on wheeled agricultural and forestry tractors - Part 2: Dynamic testing method

适用范围：GB/T 7121的本部分规定了农林轮式拖拉机防护装置的动态试验方法和验收条件。 　　防护装置试验的目的是在于使拖拉机正常作业时由翻车事故造成驾驶员受伤的可能性减至最小。 　　用模拟拖拉机向后或侧面翻车时（悬空摔落除外）...

发布日期：2008-07-09  实施日期：2009-02-01

BS EN 926-1-2006

滑翔降落伞设备.滑翔伞.结构强度的要求和试验方法

Ausruestung fuer das Gleitschirmfliegen. Gleitschirme. Anforderungen und Pruefverfahren an die Baufestigkeit Paragliding equipment Paragliders Part 1:Requirements and test methods for structural streng...

适用范围：This European Standard is applicable to paragliders as defined in 2.1.This part of EN 926 specifies requirements and test methods for the resistance of a paraglider to static anddynamic loads and sets ...

实施日期：2006-09-29

GB/T 3389.7-1986

压电陶瓷材料性能测试方法 强场介电性能的测试

Test methods for the properties of piezoelectric ceramics--Test for dielectric properties in high electric field

适用范围：本标准适用于测试压电陶瓷材料在强交变电场作用下的介电常数和介质损耗角正切。

发布日期：1986-05-26  实施日期：1987-04-30

EN 14256-2007

Adhesives for non-structural wood applications. Test method and requirements for resistance to static load

实施日期：2007-08-01

BS ISO 14487-1997

纸浆.物理试验用标准水

Halbstoffe. Standardwasser fuer physikalische Pruefungen Pulps-Standard Water for Physical Testing Pates. Eau normalisee pour essais physiques

适用范围：This International Standard specifies the requirements for standard water intended for preparing pulp suspensions to be used in tests where drainability properties are of importance, including laborato...

实施日期：1997-09-15

NF E29-300-4-2008

Industrial valves - Shell design strength - Part 4 : calculation method for valve shells manufactures in metallic materials other than steel.

NF G07-136-2012

纺织.家庭洗涤和干燥方法

Textiles - Domestic washing and drying procedures for textile testing.

DIN EN ISO 22829-2008

电阻焊 带整体式变压器的焊接喷枪用变压整流器 在频率为1000Hz运行的变压整流器

Resistance welding - Transformer-rectifier for welding guns with integrated transformers - Transformer-rectifier units operating at 1000 Hz frequency

适用范围：This International Standard is applicable to transformer-rectifier units as used in electric resistance weldingmachines operating from a power supply with a frequency of I 000 Hz, and of a rated value ...

实施日期：2008-06-01

GB/T 10237-1988

电力变压器 绝缘水平和绝缘试验外绝缘的空气间隙

Power transformers--Insulation levels and dielectric tests external clearances in air

BS EN 61300-2-50-2007

Lichtwellenleiter. Verbindungselemente und passive Bauteile. Grundlegende Prüf-und Messverfahren. Prüfungen. Festigkeitsprüfung für Lichtwellenleiter-Steckverbinder. Einmoden und Mehrmoden Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-50:Tests. Fibre optic connector proof test with static load. Singlemode and multimode Dispositifs d'interconnexion et composants passifs. fibres optiques. Méthodes fondamentales d'essais et de mesures. Ess

实施日期：2007-08-31

UL 1004-2-2014

UL Standard for Safety Impedance Protected Motors Second Edition

发布日期：2014-01-10  实施日期：2014-01-10

GB/T 50123-1999

土工试验方法标准

Standard for soil test method

适用范围：为了测定土的基本工程性质，统一试验方法，为工程设计和施工提供可靠的参数，特制订本标准。　　本标准适用于工业和民用建筑、水利、交通等各类工程的地基土及填筑土料的基本工程性质试验。

实施日期：1999-10-01

ISO 21507-2010

土方机械 非金属油箱的性能要求

Earth-moving machinery -- Performance requirements for non-metallic fuel tanks

适用范围：ISO 21507:2010 gives the performance requirements for non-metallic fuel tanks used by earth?moving machinery as defined in ISO 6165.

发布日期：2010-10-01  实施日期：2010-10-01

HB 5474-1991

热喷涂涂层剪切强度试验方法

适用范围：本标准规定了热喷涂涂层抗拉强度试验中的设备、试样及试验方法等要求。 　　本标准适用于等离子喷涂、火焰喷涂、电弧喷涂等热喷涂涂层剪切强度的测定。

发布日期：1991-06-17  实施日期：1991-10-01

ISO 5840-3-2013

Cardiovascular implants -- Cardiac valve prostheses -- Part 3: Heart valve substitutes implanted by transcatheter techniques

发布日期：2013-03-01  实施日期：2013-03-01

ISO 287-2009

纸和纸板 分批水分的测定 烘干法

Paper and board -- Determination of moisture content of a lot -- Oven-drying method

适用范围：ISO 287:2009 specifies an oven-drying method for the determination of the moisture content of a lot of paper and board. ISO 287:2009 is applicable to every type of lot of paper and board, including cor...

发布日期：2009-06-01  实施日期：2009-06-01

DIN EN 3475-418-2009

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 418: Thermal endurance for conductors

实施日期：2009-05-01