EN 2997-013-2009

Aerospace series. Connectors,electrical,circular,coupled by threaded ring,fire-resistant or non fire-resistant,operating temperatures. 65 degree C to 175 degree C continuous,200 degree C continuous,260 degree C peak. Part 013:O-ring seal for jam-nut recep

实施日期：2009-02-01

DIN EN ISO 1167-3-2008

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components

实施日期：2008-02-01

GB/T 8403.4-1987

光纤机械性能试验方法 恒定弯曲应变试验

Measuring methods for mechanical characteristics of optical fibres--Constant bending strain prooftest

BS EN ISO 1167-1-2006

Rohre,Formstuecke und Zubehoer aus thermoplastischen Kunststoffen fuer den Transport von Fluessigkeiten. Bestimmung der Widerstandsfaehigkeit gegen inneren Ueberdruck. Allgemeines Pruefverfahren Thermoplastics pipes,fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Part 1:General method Tubes,raccords et assemblages en matieres thermoplastiques pour le transport des fluids. Determination de la resistance a la pression interne. Methode gen

实施日期：2006-08-31

DIN EN 2591-401-1998

航空和航天,电和光连接元件试验方法.第401部分:加速,恒定

Aerospace series - Elements of electrical and optical connection; test methods - Part 401: Acceleration, steady state; German version EN 2591-401:1996

适用范围：The document specifies a method to determine the ability of an element of connection to withstand steady-state accelerations.

BS EN ISO 1893-2008

Feuerfeste Erzeugnisse. Bestimmung des Erweichungsverhaltens unter Druck (Druckerweichen). Differentialverfahren mit steigender Temperatur Refractory products. Determination of refractoriness under load. Differential method with rising temperature Produits réfractaires. Détermination de l'affaissement sous charge. Méthode différentielle avec élévation de la température

实施日期：2008-08-29

BS 2G 124-1-1966

Wechselstromgeneratoren fuer Flugzeuge. Spezifikation. Konstante Frequenz Specification for A.C. generators for aircraft. Part 1:Constant frequency Alternateurs pour aeronefs. Specification. Frequence constante AMD 421:February 1970

实施日期：1966-06-16

DIN 5031-8-1982

光学范围内的幅射物理学和照明技术. 幅射物理学; 幅射物理学概念和常数

Physics of radiation in the field of optics and illuminating engineering; definitions and constants of radiation physics

适用范围：Physics of radiation in the field of optics and illuminating engineering; definitions and constants of radiation physicsPhysique de radiation optique et technique d'éclairage; définitions et constantes...

EN 843-3-2005

高级陶瓷 室温下单片陶瓷的机械性能 第3部分:以恒定应力率抗挠曲强度试验对临界爆裂增长参数的测定

Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature. Part 3:Determination of subcritical crack growth parameters from constant stressing rate flexural strength...

实施日期：2005-06-01

NF T54-025-2-2006

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2 : preparation of pipe test pieces.

DIN EN 3733-104-2009

Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150℃ continuous - Part 104: Receptacle connector dummy four holes fixing - Product standard

实施日期：2009-09-01

GB/T 2423.40-1997

电工电子产品环境试验 第2部分：试验方法 试验Cx未饱和高压蒸气恒定湿热

Environmental testing for electric and electronic products--Part 2:Test methods--Test Cx:Damp heat，steady state(unsaturated pressurized vapour)

适用范围：本标准规定了一种以加速方式评定小型电工电子产品，主要是非气密元件耐湿热劣化效应的标准试验方法。　　本试验不宜用于评定诸如腐蚀和变形等外部效应。

发布日期：1997-12-26  实施日期：1998-12-01

EN 3733-005-2007

Aerospace series. Connector,optical,circular,single channel,coupled by self-locking ring,operating temperature 150 Degree C continuous. Part 005:Receptacle,connector,two hole fixing cable according to EN 4532,product standard

实施日期：2007-12-01

GB/T 453-1989

纸和纸板抗张强度的测定法(恒速加荷法)

实施日期：1989-12-01

EN 15042-1-2006

Thickness measurement of coatings and characterization of surfaces with surface waves. Part 1:Guide to the determination of elastic constants,density and thickness of films by laser induced surface acoustic waves

实施日期：2006-04-01

GB/T 5080.7-1986

设备可靠性试验 恒定失效率假设下的失效率与平均无故障时间的验证试验方案

Equipment reliability testing--Compliance test plans for failure rate and mean time between failures assuming constant failure rate

适用范围：本部分假定相邻失效间时间(对可修复设备)或失效前时间(对不可修复设备)的统计分布是服从指数分布的，即失效率为常数。　　在上述条件下，本部分的统计试验方案适用于以平均无故障时间、失效前平均时间及失效率为可靠性特征的...

发布日期：1986-11-19  实施日期：1987-10-01

DIN EN ISO 1893-2008

耐火制品 荷重软化温度的测定 示差升温法

Refractory products - Determination of refractoriness under load - Differential method with rising temperature

适用范围：This International Standard specifies a method for determining the deformation of dense and insulatingshaped refractory products, when subjected to a constant load under conditions of progressively ris...

实施日期：2008-09-01

BS EN 843-3-2005

Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature. Determination of subcritical crack growth parameters from constant stressing rate flexural strength tests

实施日期：2007-01-31

EN 2591-401-1996

Aerospace Series. Elements of Electrical and Optical Connection. Test Methods. Part 401:Acceleration,Steady State

实施日期：1996-01-01

BS EN ISO 1167-3-2007

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Preparation of components

实施日期：2008-04-30