JB/T 8825.7-2011

惠氏螺纹刀具 第7部分：滚丝轮

Tool for whitworth threads-Part 7:Thread rolling cylindrical dies

适用范围：本标准规定了惠氏螺纹用滚丝轮的型式、尺寸及偏差、技术要求、标志和包装等的基本要求。滚丝轮分为两种精度等级：2级和3级。2级适用于加工中等级外螺纹，3级适用于加工自由级外螺纹。本标准适用于加工惠氏螺纹的滚丝轮。

发布日期：2011-12-20  实施日期：2012-04-01

BS 916-1953

英国惠氏标准螺纹的六角和方头粗制螺栓、螺钉与螺母和英国细牙标准螺纹或英国惠氏标准螺纹的部分机用六角和方头螺栓、螺钉和螺母规范

Schwarze Bolzen,Schrauben und Muttern,sechs-und vierkantig,mit B.S.W. Gewinde,und mechanisch halbverarbeitete Bolzen,Schrauben und Muttern,sechs-und vierkantig,mit B.S.W. oder B.S.F. Gewinde. Spezifika...

实施日期：1953-09-29

DIN 336-2003

切割螺纹用螺纹小径钻头的直径

Diameters of drills for minor diameters of tapped threads

适用范围：This standard specifies sizes for drills to be used prior to tapping cylindrical screw threads with standard length of engagement where the drill diameter is approximately equal to the nominal thread d...

BS 2470-1973

英制系列六角凹头螺钉和套筒扳手规范.英制系列

Specification for hexagon socket screws and wrench keys. Inch series

适用范围：Specifies dimensions, tolerances and general requirements for cap screws, countersunk-head screws, button-head screws and shoulder screws (stripper bolts) and set screws, also their mechanical properti...

实施日期：1973-06-15

EN ISO 228-2-2003

Pipe threads where pressure-tight joints are not made on the threads. Part 2:Verification by means of limit gauges

实施日期：2003-02-26

BS EN ISO 228-2-2003

螺纹上无压力密闭接头的管子螺纹 第2部分:极限量规进行验证 连同BS EN ISO 228-1:2003,替代BS 2779:1986

Rohrgewinde fuer nicht im Gewinde dichtende Verbindungen. Pruefung mit Grenzlehren Pipe threads where pressure-tight joints are not made on the threads Part 2:Verification by means of limit gauges File...

适用范围：This part of IS0 228 specifies the verification, by means of limitgauges, of cylindrical threads, the dimensions and tolerancesof which are given in IS0 228-l.For industrial applications (see for examp...

实施日期：2003-02-26

BS 64-1992

铁路鱼尾板用的标准和高强度钢螺栓和螺母规范

Schienenfahrzeuge. Normale und hochfeste Stahlbolzen und muttern fur Schienenlaschen Specification for Normal and High Strength Steel Bolts and Nuts for Railway Rail Fishplates Boulons et ecrous en aci...

适用范围：This British Standard specifies the dimensions and requirements for normal and high strength bolts and nuts for fishplates conforming to BS 47 : Part 1 : 1991 for use with railway rails conforming to B...

实施日期：1992-11-15

BS 811-1950

自行车螺纹(B.S.C.螺纹,以前称为C.E.I.螺纹)规范

Cycle-Gewinde (B.S.C.) (frueher als C.E.I.-Gewinde bekannt). Spezifikation Specification Cycle threads Filetages pour cycles (B.S.C.) (anciennement appeles filetages C.E.I.). Specification AMD:July 195...

适用范围：Form and dimensions for bolts, nuts, spokes, nipples and special applications. Table of limits and tolerances for threads, for bolts and nuts and for special applications.

实施日期：1950-05-24

JB/T 8825.5-2011

惠氏螺纹刀具 第5部分：圆板牙

Tool for whitworth threads-Part 5:Circular screwing dies

适用范围：本标准规定了惠氏螺纹圆板牙的型式和尺寸、技术要求、性能试验、标志和包装的基本要求。本标准适用于加工螺纹代号为1/8～23/4惠氏螺纹的圆板牙。

发布日期：2011-12-20  实施日期：2012-04-01

BS 3777-1964

螺纹量筒规范

Schraubgewindemesszylinder. Spezifikation Screw Thread Measuring Cylinders Cylindres de mesure des filetages de vis. Specification Amd 1;

适用范围：Grade A (pitch-line) and Grade B (grouped) measuring cylinders for checking external screw threads of Unified and ISO inch, Whitworth, B.A. and ISO metric form by means of pitch diameter measuring mach...

实施日期：1964-01-01

JB/T 8825.3-2011

惠氏螺纹刀具 第3部分：丝锥技术条件

Tool for whitworth threads-Part 3:Technical specification for taps

适用范围：本标准规定了惠氏螺纹丝锥和惠氏螺纹螺母丝锥的技术要求、标志和包装等基本要求。本标准适用于按JB/T 8825.1和JB/T 8825.4生产的加工惠氏螺纹的丝锥和螺母丝锥。

发布日期：2011-12-20  实施日期：2012-04-01

BS 1157-1975

槽纹用丝锥用螺纹底孔钻头尺寸推荐标准

Recommendations for tapping drill sizes for use with fluted taps

适用范围：Sizes for ISO internal metric threads to BS 3643 (Parts 1, 2 and 3) and for internal threads to BS 21,84,93, 1580 (Parts 1, 2 and 3) and 2779. Alternative sizes in appendix.

实施日期：1975-09-30

CNS 315-1953

导引丝公(机用,适于韦氏管子螺孔)

Guide Tap for Whitworth Pipe Thread, Machine Operated

发布日期：1953-07-29  实施日期：1953-07-29

CNS 305-1953

丝公(手用,适于韦氏管子螺纹CNS494及CNS495)

Hand Taps for Whitworth Pipe Threads

发布日期：1953-07-29  实施日期：1953-07-29

DIN 382-2009

Hexagonal die-nuts

实施日期：2009-12-01

DIN EN 10241-2000

钢制螺纹管接头

Threaded steel fittings; German version prEN 10241:1994

适用范围：The document specifies the requirments for threaded steel fittings, of nominal sizes from DN 6 to DN 150 inclusive, made out of welded or seamless tubes, forgings and rolled bars, for the transportatio...

CNS 493-1955

韦氏细螺纹(尖端有空隙,直径自20至189公厘)

Fine Whitworth Thread (Diameter Ranging From 20 to 189 mm, with Tip Clearance)

发布日期：1955-09-24  实施日期：1955-09-24

BS 949-2-1992

丝锥.统一标准细螺纹丝锥规范:制造公差

Screwing taps. Specification for unified ground thread taps. Manufacturing tolerances

适用范围：This Part of BS 949 specifies dimensions and tolerances for screwing taps for the following threads: a) Unified (ISO inch) general-purpose screw threads, coarse thread series (UNC), from no. 1 to no. 1...

实施日期：1992-12-15

BS 919-2-2007

螺纹规极限和公差规范.第2部分:惠氏螺纹量规及英制螺纹量规

Grenzwerte und Toleranzen von Gewindelehren. Spezifikation Lehren fuer Schraubgewinde nach Whitworth und BA Screw gauge limits and tolerances. Part 2:Specification for gauges for screw threads of Whitw...

适用范围：This Part of BS 919 specifies requirements for the following gaugesintended for checking screw threads in the regular series, suchas BS Whit., BS Fine, B.A., BSC and BS Conduit.a) Screw gauges for gene...

实施日期：2007-11-30

DIN EN ISO 228-2-2003

非螺纹密封连接的管螺纹 第2部分:极限量规检验

Pipe threads where pressure-tight joints are not made on the threads Part 2: verification by means of limit gauges

适用范围：The standard specifies the verification of pipe threads by means of limit gauges.