DIN 46244-2-1987

仪器开槽扁插头

Slit tab attached to equipment

适用范围：Specification of dimensions, designation, materials and requirements for slit tabs attached to equipment suitable for pushing-on one 6.3 mm receptacle or two 2.8 mm receptacles.

IEC 60130-5-1966

频率低于3MHz的连接器 第5部分:刀形多接触件矩形连接器

Connectors for frequencies below 3 MHz - Part 5: Rectangular multipole connectors with blade contacts

适用范围：Covers a range of rectangular multipole connectors with blade contacts, with either solder type terminations or solderless terminations of the wrap type. Specifies IEC type designation, dimensions, gau...

发布日期：1966-01-01  实施日期：1966-01-01

DIN EN ISO 8092-3-1999

道路车辆.扁平快速联接终端.第3部分:多极联接的凸缘.尺寸、特殊要求

Road vehicle - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections, dimensions and specific requirements (ISO 8092-3:1996); German version EN ISO 8092-3:1999

适用范围：The document covers design requirements, and electrical resistance.#,,#

ISO 8092-1-1996

道路车辆 车载电气线束的连接 第1部分:单极联接接头 尺寸和特殊要求

Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 1: Tabs for single-pole connections -- Dimensions and specific requirements

适用范围：Gives dimensions for the tabs of single-pole connections and specific requirements, for on-board electrical wiring harnesses of road vehicles. Does apply to connections designed to be disconnected afte...

发布日期：1996-02-01  实施日期：1996-02-01

ISO 8820-8-2012

道路车辆 熔断器 第8部分:额定电压为450v的带有螺栓的熔断器

Road vehicles -- Fuse-links -- Part 8: Fuse-links with bolt-in contacts (Type H and J) with rated voltage of 450 V

适用范围：ISO 8820-8:2012 specifies fuse-links with bolt-in contacts (Type H and J) and test fixtures for the fuse-links for use in road vehicles. It establishes, for these fuse-link types, the rated current, te...

发布日期：2012-08-01  实施日期：2012-08-01

IEC 60512-16-17-2008

电子设备用连接器 试验和测量 第16-17部分:接触件及引出端机械试验 试验16q:固定插片抗拉和抗压强度

Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs

适用范围：IEC 60512-16-17:2008 details a standard test method to determine the ability of a fixed male tab and its fixing to withstand specified tensile and compressive forces. If so specified in the detail spec...

发布日期：2008-07-21  实施日期：2008-07-21

DIN EN ISO 8092-1-1998

道路交通.扁平的快速联接终端.第1部分:单极连接接头

Road vehicles - Connections for on-board electrical wiring harnesses - Part 1: Tabs for single-pole connections - Dimensions and specific requirements (ISO 8092-1:1996); German version EN ISO 8092-1:19...

适用范围：The following items are covered: Design requirements, connection forces, disconnection forces, electrical resistance.#,,#

NF C60-020-2011

Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements.

EN 60512-16-14-2008

Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs

BS EN 60512-16-16-2008

Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16p. Torsional strength, fixed male tabs

实施日期：2009-01-31

BS EN 60512-16-14-2008

Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16n. Bending strength, fixed male tabs

实施日期：2009-01-31

NF C93-400-16-17-2009

Connectors for electronic equipment - Tests and measurements - Part 16-17 : mechanical tests on contacts and terminations - Test 16q : Tensile and compressive strength, fixed male tabs.

NF R13-404-1990

公路车辆.碳氢燃料泵的电连接

Road vehicles. Fuel pump electric connections.

DIN ISO 9534-1991

道路车辆.燃油泵的电连接

Road vehicles; fuel pump electric connections; identical with ISO 9534:1989

适用范围：The standard specifies the requirements for electric connections for electric fuel pumps used in road vehicles. It does not apply to electric fuel pumps with free couplers, i. e. cable-to-cable termina...

DIN EN 60512-16-14-2009

电子设备用连接器 试验和测量 第16-14部分:接触件及引出端机械试验 试验16n:固定插片抗弯强度

Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs

实施日期：2009-03-01

DIN 46342-1-1973

带直形和角形固定孔的扁插头用插套

Tabs, straight and angled, for receptacles

适用范围：Tabs, straight and angled, for receptacles

NF C93-400-99-001-2013

Connectors for electronic equipment - Test and measurements - Part 99-001 : test schedule for engaging and separating connectors under electrical load - Test 99a : connectors used in twisted pair communication cabling wi

EN 60512-16-16-2008

Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs

NF C93-400-16-16-2009

Connectors for electronic equipment - Tests and measurements - Part 16-16 : mechanical tests on contacts and terminations - Test 16p : Torsional strength, fixed male tabs.

IEC 61210-2010

连接器件 连接铜导线用的扁形快速连接端头 安全要求

Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements

适用范围：IEC 61210:2010 applies to non-insulated flat quick-connect terminations consisting of a male tab of size 2,8 mm, 4,8 mm, 6,3 mm or 9,5 mm with hole or dimple detents and a mating female connector for u...

发布日期：2010-08-31  实施日期：2010-08-31