CNS 1011-1968

水硬性水泥墁料抗拉强度检验法

EN 13880-7-2003

Hot applied joint sealants Part 7:Function testing of joint sealants

实施日期：2003-08-29

ISO 15107-1998

粘合剂 胶粘件抗裂强度的测定

Adhesives -- Determination of cleavage strength of bonded joints

发布日期：1998-09-01  实施日期：1998-09-01

BS 2L 77-1971

Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)

BS EN 12803-2000

鞋靴 外底的试验方法 抗拉强度和伸长率

Footwear. Test methods for outsoles. Tensile strength and elongation

适用范围：此欧洲标准规定了测定外底抗拉强度和伸长率的测试方法。

发布日期：2000-06-15 

BS 2HR 205-2009

Gegluehtes Band und Blech aus Nickel-Kupfer-Legierung auf Nickelbasis (Cu 31) Specification for nickel-copper alloy sheet and strip:annealed (Nickel base,Cu 31) T?les et feuillards en alliages nickel-cuivre. l'état recuit (base de nickel,Cu 31). Spécifications

实施日期：2009-11-30

NF F50-201-4/IN1-2010

Railway applications - Track - Rail - Part 4 : vignole railway rails from 27 kg/m to, but excluding 46 kg/m.

GB/T 25048-2010

金属材料 管 环拉伸试验方法

Metallic materials-Tube-Ring tensile test

发布日期：2010-09-02  实施日期：2011-06-01

ASTM A1058-2012a

Standard Test Methods for Mechanical Testing of Steel Products-Metric

实施日期：2012-10-01

DIN 65378-1989

航空和宇航;纤维增强塑料;单向层压板检验,对纤维方向的横向拉力试验

Aerospace; fiber reinforced plastics; testing of unidirectional laminates; tensile test transverse to fiber direction

适用范围：The test method covered by this standard serves to determine the tensile strength and modulus of elasticity on unidirectional laminates in 90?direction (transverse to fibre direction). The test is perf...

EN 14119-2003

Testing of textiles Evaluation of the action of microfungi

实施日期：2003-09-01

NF B43-201-1998

高技术陶瓷. 室温下陶瓷复合物机械特性.第1部分:拉伸性能的测定

Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Part 1 : determination of tensile properties.

DIN EN ISO 22721-2010

输送带 地下采矿用橡胶或塑料覆盖的织物结构输送带规范

Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining

适用范围：This International Standard specifies requirements for rubber- or plastics-covered conveyor belting of textile construction for underground mininig on flat or troughed idlers. It is not applicable to l...

实施日期：2010-01-01

ISO 9762-2000

航空航天 航空器操纵钢丝绳组件 尺寸及端部配件组合

Aerospace -- Aircraft control wire rope assemblies -- Dimensions and end-fitting combinations

发布日期：2000-12-01  实施日期：2000-12-01

ISO 18672-1-2009

常压废水和污水排放用塑料管道系统 聚酯树脂混凝土 第1部分:带有柔性接头的管子和配件

Plastics piping systems for non-pressure drainage and sewerage -- Polyester resin concrete (PRC) -- Part 1: Pipes and fittings with flexible joints

适用范围：ISO 18672-1:2009 specifies definitions, requirements and characteristics of pipes, fittings, joints, materials, test methods and marking for pipes and fittings made from polyester resin concrete (PRC),...

发布日期：2009-06-01  实施日期：2009-06-01

BS EN 13674-4-2006

Bahnanwendungen. Oberbau. Schienen. Vignolschienen mit einer laengenbezogenen Masse zwischen 27 kg/m und unter 46 kg/m Railway applications Track Rail Part 4:Vignole railway rails from 27 kg/m to,but excluding 46 kg/m Applications ferroviaires. Voie. Rails. Rails Vignole de masse comprise entre 27 kg/m et 46 kg/m,46 kg/m non compris

实施日期：2006-05-31

DIN EN ISO 9809-1-2010

气瓶 可重复充装的无缝钢气瓶 设计、制造和测试 第1部分:抗拉强度低于1100MPa的淬火和回火钢瓶

Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1100 MPa (ISO 9809-1:2010); Ge...

实施日期：2010-10-01

DIN EN 2591-709-2002

航空和航天 电气和光学仪器连接件 试验方法 第709部分:光学元件 耦合件的抗拉强度

Aerospace series - Elements of electrical and optical connection - test methods - part 709: Optical elements - tensile strength of couplers

适用范围：The document specifies a method of checking the tensile strength of couplers in conditions of mechanical and thermal stress. It shall be used together with EN 2591-100.

NF A49-901-3-2000

Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 l up to and including 150 l - Part 3 : cylinders made of seamless stainless steel with an Rm

JB/T 7424-2007

涂附磨具 抗拉强度和伸长率测定方法

Coated abrasives-Determination of tensile strength and extendibility

适用范围：本标准规定了涂附磨具的抗拉强度及伸长率的测定方法。本标准适用于砂页、砂卷、砂带。

实施日期：2007-11-01