DIN EN 572-8-2004

建筑玻璃 基本钠钙玻璃制品 第8部分:交货和最终切割尺寸

Glass in building - Basic soda lime silicate glass products - Part 8: Supplied and final cut sizes

BS EN 754-8-2008

铝和铝合金.冷拔棒材和管材.出水孔管.公差,尺寸和形状

Aluminium und Aluminiumlegierungen. Gezogene Stangen und Rohre. Mit Kammerwerkzeug Stranggepresste Rohre,Grenzabma?e und Formtoleranzen Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Part...

适用范围：This document specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawnporthole tubes with an outside diameter (OD) from 3 mm to 350 mm (round tube, see Figure 1) or ...

实施日期：2008-04-30

ASTM C1583/C1583M-2013

Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)

DIN EN 1301-3-2008

Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions

实施日期：2008-12-01

BS EN 13602-2002

铜和铜合金 制造导电体用拉拔铜圆导线

Kupfer und Kupferlegierungen. Gezogener Runddraht aus Kupfer zur Herstellung elektrischer Leiter Copper and Copper Alloys Drawn,Round Copper Wire for the Manufacture of Electrical Conductors Cuivre et ...

适用范围：This European Standard specifies the composition, property requirements including electrical properties, anddimensional tolerances for drawn round copper wire from 0,04 mm up to and including 5,0 mm fo...

实施日期：2002-09-20

BS EN 754-5-2008

锻铝和铝合金.冷拔棒材/条材和管材.第5部分:矩形棒材.尺寸和形状公差

Aluminium und Aluminiumlegierungen. Gezogene Stangen und Rohre. Rechteckstangen,Grenzabma?e und Formtoleranzen Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Part 5:Rectangular bars,toler...

适用范围：This document specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawnrectangular bars having thicknesses in the range from 2 mm up to and including 60 mm and widths...

实施日期：2008-04-30

ISO 2701-1977

一般用途非合金钢丝绳用拉拔钢丝. 验收条件

Drawn wire for general purpose non-alloy steel wire ropes -- Terms of acceptance

适用范围：Specifies definitions, tests and retests, sampling and criteria of conformity as well as acceptance or refusal.

发布日期：1977-12-01  实施日期：1977-12-01

DIN 59766-2008

Square bars of wrought nickel and wrought nickel alloys, drawn - Dimensions and tolerances on dimensions and form

实施日期：2008-05-01

DIN EN 754-2-2008

Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties

实施日期：2008-06-01

DIN EN 754-6-2008

Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form

实施日期：2008-06-01

ASTM A576-1990b(2012)

Standard Specification for Steel Bars,Carbon,Hot-Wrought,Special Quality

实施日期：1990-08-30

DIN EN 754-4-2008

Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form

实施日期：2008-06-01

NF A50-610-2-2013

Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2 : mechanical properties

NF L15-612-1973

铝合金拉制圆管 精制管

Drawn tubes of circular section in aluminium alloys. Precision tubes.

NF A50-670-2-2008

Aluminium and aluminium alloys - Drawn wire - Part 2 : mechanical properties.

DIN EN 50262-2005

电气设备的电缆连接

Cable glands for electrical installations

实施日期：2005-05-01

BS EN 3342-2005

Luft-und Raumfahrt. Aluminiumlegierung AL-P6061. T4 oder T42. Gezogene oder Stranggepreste Stangen und Profile. a oder D<= 150 mm Aerospace series-Aluminium alloy AL-P6061-T4 or T42-Drawn or extruded bar and section-a or D less than or equal to 150 mm Serie aerospatiale. Alliage d'aluminium AL-P6061. T4 ou T42. Barres et profiles etires ou files. a ou D<= 150 mm

实施日期：2005-11-18

DIN 8156-2005

无套筒的拉床用链

Draw bench chains without bushes

NF A50-610-5-2008

Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5 : rectangular bars, tolerances on dimensions and form.

EN 754-1-2008

铝和铝合金锻件.冷拔棒材和管材.第1部分:交货技术条件

Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Part 1:Technical conditions for inspection and delivery

实施日期：2008-03-01