DIN CEN/TS 15325-2008

Bitumen and bituminous binders - Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode

实施日期：2008-04-01

ISO 9538-1996

航空航天--液压管路安装接头及管接头--平面弯曲试验

Aerospace -- Hydraulic tubing joints and fittings -- Planar flexure test

适用范围：Specifies a flexure test procedure for reconnectable and permanent hydraulik tube joints. This procedure is intended for conducting flexure tests on fittings with high-strength hydraulik tubes made of ...

发布日期：1996-01-01  实施日期：1996-01-01

EN 1109-2013

防水柔性板 屋顶防水用沥青板 低温下柔韧性的测定

Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flexibility at low temperature

实施日期：2013-04-01

DIN EN 14967-2006

Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics; German version EN 14967:2006

实施日期：2006-08-01

IEC 61788-4-2011

超导性 第4部分:剩余电阻比测量 Nb-Ti复合超导体的剩余电阻比

Superconductivity. Part 4:Residual resistance ratio measurement. Residual resistance ratio of Nb-Ti composite superconductors Supraconductivit. Partie 4:Mesure du rapport de résistance résiduelle. Rapp...

适用范围：IEC 61788-4:2011 covers a test method for the determination of the residual resistance ratio (RRR) of composite superconductors comprised of Nb-Ti filaments and Cu, Cu-Ni or Cu/Cu-Ni matrix. This metho...

发布日期：2011-07-11  实施日期：2011-07-01

EN 14967-2006

Flexible sheets for waterproofing. Bitumen damp proof courses. Definitions and characteristics

实施日期：2006-05-01

BS EN 843-1-2006

高级技术陶瓷.整体陶瓷.室温下陶瓷的机械特征.弯曲强度的测定

Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature. Determination of flexural strength

适用范围：This part of EN 843 specifies methods for determining the nominal flexural strength of advanced monolithic technical ceramic materials at ambient temperature. The available loading geometries are three...

实施日期：2007-01-31

NF B41-218-2005

Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method.

EN 14771-2012

Bitumen and bituminous binders. Determination of the flexural creep stiffness. Bending Beam Rheometer (BBR) [Use:IP 533/2012,IP 533/05]

实施日期：2012-05-01

DIN EN ISO 178-2013

塑料 弯曲性能的测定

Plastics - Determination of flexural properties (ISO 178:2010 + Amd.1:2013); German version EN ISO 178:2010 + A1:2013

发布日期：2013-09-01  实施日期：2013-09-01

BS EN 1109-2013

防水柔性薄板 屋面防水用薄沥青板 低温下柔性的测定

Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flexibility at low temperature

发布日期：2013-05-31  实施日期：2013-05-31

NF B41-206-1-2007

Advenced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1 : determination of flexural strength.

DIN EN 843-1-2008

Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength

实施日期：2008-08-01

ISO 10471 AMD 1-2010

玻璃增强热固塑料(GRP)管 潮湿条件下长效最终弯曲应变和长交最终相对环偏摆量测定

Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions

实施日期：2010-09-01

EN 843-1-2006

高级陶瓷.室温下单片陶瓷的机械性能.第1部分:抗弯强度的测定

Advanced Technical Ceramics. Monolithic Ceramics. Mechanical Properties at Room Temperature Part 1:Determination of Flexural Strength

实施日期：2006-12-01

ISO 10471-2003

玻璃增强热固塑料(GRP)管 潮湿条件下长效最终弯曲应变和长交最终相对环偏摆量测定

Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions

适用范围：ISO 10471:2003 specifies a method for determining by extrapolation the long-term ultimate bending strain and the calculation of the long-term ultimate relative ring deflection of glass-reinforced therm...

发布日期：2003-12-01  实施日期：2003-12-01

EN ISO 15732-2005

Fine ceramics (advanced ceramics,advanced technical ceramics). Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method ISO 15732:2003

实施日期：2005-06-01

BS EN ISO 178-2010

Plastics. Determination of flexural properties

发布日期：2011-01-31  实施日期：2011-01-31

NF T66-062-2012

Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR).

DIN EN ISO 15732-2005

精细陶瓷(高级陶瓷,高技术陶瓷) 用单边早期裂纹束(SEPB)法对室温下块体陶瓷断裂韧度的试验方法

Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method

适用范围：This standard specifies a test method for the determination of fracture toughness of monolithic ceramic materials at room temperature by the single edge precracked beam (SEPB) method. It is applicable ...

实施日期：2005-09-01