DIN EN 1113-2011

Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification; German version EN 1113:2008+A1:2011

NF D18-206-3-2002

Waste fittings for sanitary appliances - Part 3 : quality control.

NF D36-111-1989

辅助设备.烹调.加热.装配于煤气网供气家用燃气设备和G1/2B阳连接墙装龙头的塞子和橡皮接头

Auxiliary equipment. Cooking. Heating. Push-on connectors for rubber tubes and caps intended to be fitted on certain domestic appliances using mains distributed combustible gases and on G 1/2 B male wa...

实施日期：1989-12-01

DIN EN 14452-2005

饮用水防回流污染的安全装置 具有进气孔和活动件DN10-DN20的断流器 D类B型

Devices to prevent pollution by backflow of potable water - Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 - Family D, type B

适用范围：This European standard specifies the characteristics of pipe interrupters with atmospheric vent and moving element of nominal size DN 10 to DN 20 that are suitable for use in drinking water systems at ...

实施日期：2005-08-01

EN 16145-2012

卫生设备配件 水槽和脸盆龙头用可抽出排水口 通用技术规范

Sanitary tapware. Extractable outlets for sink and basin mixers. General technical specification

实施日期：2012-12-01

BS EN 200-2008

卫生用水龙头.PN10型单一和混合水龙头(公称尺寸1/2)通用技术规范.最小流动压力0.05MPa(0.5bar)

Sanitary tapware. Single taps and combination taps for water supply systems of type 1 and type 2. General technical specification

适用范围：This European Standard specifies:a) the field of application for pillar taps, bib taps, single and multi-hole combination taps for use in:1) a supply system of Type 1 (see Figure 1);2) a supply system ...

实施日期：2009-01-31

BS EN 14452-2005

Devices to prevent pollution by backflow of potable water. Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20. Family D, t ype B

实施日期：2006-12-29

DIN EN 816-1997

卫生设备.PN10用自动截止阀

Sanitary tapware - Automatic shut-off valves PN 10; German version EN 816:1996

适用范围：The document specifies the marking, identification, chemical/hygiene requirements, dimensional, characteristics, soundness, pressure resistance, hydraulic, endurance and acoustic characteristics of aut...

BS 5412-1996

低阻单一和复合龙头组件(额定尺寸<1/2>和<1/4>适用于最大PN10操作.最低液压0.01MPa(0.1bar)

Specification for low-resistance single taps and combination tap assemblies (nominal size $9H and $9L) suitable for operation at PN 10 max. and a minimum flow pressure of 0.01 MPa (0.1 bar)

适用范围：The standard specifies the dimensional, watertightness, pressure resistance, hydraulic, mechanical strength and endurance characteristics with which size 1/2 and 3/4 single taps and combination taps sh...

NF P43-016-2005

建筑物水管阀门."HA" 端部断路器. 一般技术规范

Devices to prevent pollution by backlow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H, type A.

CNS 11408-1995

铁路车辆用三通旋塞

Three-way Cocks for Railway Rolling Stock

发布日期：1985-11-15  实施日期：1995-11-30

DIN EN 200-2008

Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification

实施日期：2008-10-01

GB 4627.5-1984

螺旋升降式水嘴型式和尺寸 化验水嘴

Size and type of screw up-down taps--Laboratory water taps

DIN EN 14453-2005

饮用水防回流污染的安全装置 具有进气孔和活动件DN10-DN20的断流器 D类C型

Devices to prevent pollution by backflow of potable water - Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 - Family D, type C

适用范围：This European standard specifies the characteristics of pipe interrupters with permanent atmospheric vent nominal size DN 10 up to DN 32 that are suitable for use in drinking water systems at pressures...

实施日期：2005-08-01

EN 274-2-2002

卫生设备用下水道管件.第2部分:试验方法

Waste Fittings for Sanitary Appliances. Part 2:Test Methods

实施日期：2002-01-01

DIN 3292-2-1984

家用安装设备配件.可锻铸铁连接螺母

Fittings for domestic installation; malleable cast iron union nuts

CNS 9169-1982

两轮机车用机油排泄孔螺旋塞

Thread Plug of Oil Drain Hole for Motor - Cycle

发布日期：1982-07-21  实施日期：1982-07-21

JIS A1424-2-1998

给水设施噪声的实验室测定方法－第2部分:给水阀及混合水阀的安装及工作条件

Method for laboratory tests on noise emission from appliances and equipments used in water supply installations -- Part 2: Mounting and operating conditions for draw-off taps and mixing valves

适用范围：この規格は，JIS A 1421-1で規定する給水器具発生音の実験室測定方法における試験装置及び試験方法によって，給水器共発生音を測定するときの給水栓及び混合水栓の取付方法並びに作動条件について規定する。 対象とする給水栓及び混合水栓は，建築物（流し，洗面槽...

BS EN 14451-2005

Sicherungseinrichtungen zum Schutz des Trinkwassers gegen Verschmutzung durch Rueckfliessen. Rohrbeluefter DN 8 bis DN 80. Familie D,Typ A Devices to prevent pollution by backflow of potable water. In-line anti-vacuum valves DN 8 to DN 80. Family D,type A Dispositifs de protection contre la pollution de l'eau potable par retour. Soupape anti-vide en ligne DN 8 a DN 80. Famille D,type A CORR:November 30,2008

实施日期：2005-12-21

BS EN 14454-2005

Devices to prevent pollution by backflow of potable water. Hose union backflow preventer DN 15 to DN 32 inclusive. Family H, type A

实施日期：2006-10-31