GB/T 13772.3-1992

机织物中纱线抗滑移性测定方法 摩擦法

The method ofr determination of slippage resistance of yarns in woven fabrics-Friction method

实施日期：1993-06-01

ASTM D1882-1996(2006)

冷却系统化学溶液对汽车有机面漆影响的试验方法

Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles

适用范围：<p id="s00010">This test method will distinguish between cooling system chemical solutions that do or do not have a tendency to change the surface appearance when applied to organic finishes used on ve...

实施日期：1996-04-10

QB 2585-2003

喷水按摩浴缸

Hydromassage bathtub ...

实施日期：2003-10-01

QC/T 62-1993

摩托车减震器技术条件

实施日期：1994-01-01

NF J31-156-2003

Ships and marine technology - Ventilation of cargo spaces where vehicles with internal combustion engines are driven - Calculation of theoretical total airflow required.

DIN EN ISO 12100-2011

Safety of machinery. General principles for design. Risk assessment and risk reduction (ISO 12100:2010); German version EN ISO 12100:2010

DIN 71992-1982

控制用钢丝绳的吊环

Eye-fittings for cable for controls

适用范围：Eye-fittings for cable for controls

BS EN 1436-2007+A1-2008

Road marking materials. Road marking performance for road users

实施日期：2007-08-31

JB/T 11231-2011

摩擦驱动悬挂输送机

Friction drive overhead conveyors

适用范围：本标准规定了摩擦驱动悬挂输送机的型式、基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于接力式摩擦驱动的悬挂输送机。

发布日期：2011-12-20  实施日期：2012-04-01

GB/T 15363-1994

摩托车和轻便摩托车驻车性能要求

Motorcycle and moped parking performance requirements

实施日期：1995-07-01

ISO 16844-4-2004

道路车辆 速度记录器系统 第4部分:CAN接口

Road vehicles -- Tachograph systems -- Part 4: CAN interface

适用范围：ISO 16844-4:2004 specifies the CAN (controller area network) interface for the interchange -- performed in accordance ISO 16844-6 -- of digital information between a road vehicle''s tachograph system a...

发布日期：2004-09-01  实施日期：2004-09-01

JB/T 7862.4-2001

农业机械 切割器的摩擦片

Wearing Plates of cutter bars for agricultural machinery

实施日期：2001-12-01

GB 14621-2002

摩托车和轻便摩托车排气污染物排放限值及测量方法（怠速法）

Limits and measurement methods for exhaust emissions from motorcycles and mopeds at idle speed

适用范围：本标准规定了在怠速工况下摩托车和轻便摩托车排气中一氧化碳（CO）、碳氢化合物（HC)排放的容积浓度限值、测量仪器和方法。本标准适用于装有火花点火式发动机的摩托车和轻便摩托车。

发布日期：2002-11-18  实施日期：2003-06-01

GB 17510-2008

摩托车光信号装置配光性能

Photometric characteristics of light-signalling devices for motorcycles

适用范围：本标准规定了摩托车和轻便摩托车用前位灯、后位灯、制动灯、转向信号灯和后牌照灯有关配光性能的要求、试验方法和检验规则等。　 本标准适用于摩托车和轻便摩托车用前位灯、后位灯、制动灯、转向信号灯和后牌照灯。　　在本标准中...

发布日期：2008-11-10  实施日期：2009-05-01

NF R14-709-2003

Road vehicles - Ergonomic aspects of transport information and control systems - Procedure for assessing suitability for use while driving.

GB/T 12705.1-2009

纺织品 织物防钻绒性试验方法 第1部分：摩擦法

Textile - Methods of testing the down-proof properties of fabrics - Part 1: Rubbing test

适用范围：GB/T 12705的本部分规定了采用摩擦法测定织物防钻绒性的方法。本部分适用于制作羽绒制品用的各类织物。羽绒制品可根据实际情况参照采用。

发布日期：2009-06-19  实施日期：2010-02-01

ISO 20566-2013

Paints and varnishes -- Determination of the scratch resistance of a coating system using a laboratory-scale car-wash

发布日期：2013-02-01  实施日期：2013-02-01

NF C75-745-2-3-2007

Hand-held motor operated electric tools - Safety - Part 2-3 : particular requirements for grinders, polishers and disk-type sanders.

NF T46-014-2007

Rubber - Determination of frictional properties.

ASTM D69-2012

绝缘胶布试验方法

Standard Test Methods for Friction Tapes

适用范围：In most applications, a friction tape must have adequate adhesion to remain in place and function properly.

实施日期：2012-04-01