JIS B4446-1998

圆锥管螺纹丝锥

Hand taps for taper pipe threads

适用范围：この規格は，呼びRc1/16～Rc 4の管用テーパねじ及び呼びRp1/16～4の管用平行ねじのねじ立てに用いる管用テーパねじ用タップ（以下，タップという。)について規定する。

DIN 1480-2005

锻制(开口)螺旋扣

Turnbuckles, Forged (Open Type)

适用范围：The standard specifies characteristics of forged turnbuckles (open type) made of steel with sizes M6 to M56.

实施日期：2005-09-01

BS EN 60079-0-2012

Explosive atmospheres. Equipment. General requirements

发布日期：2012-09-30  实施日期：2012-09-30

DIN 99-1996

锥形手柄

Tapered handles

SJ 2818-1987

自攻螺纹

Tapping screws thread

实施日期：1988-04-30

BS 4377-1991

螺纹镶齿金属丝锥进行孔攻丝的规范(ISO米制螺纹)

Tapping of Holes to Receive Wire Thread Inserts (ISO Metric Threads)

适用范围：Specifies limits of size for tapped holes to accomodate wire thread inserts to provide ISO metric thread sizes from M1.6 (1.6 mm diameter) to M39 (39 mm diameter) inclusive.

实施日期：1991-01-01

ISO 2306-1972

使用前先攻螺纹用钻头

Drills for use prior to tapping screw threads

适用范围：Specifies the sizes of these drills for ISO metric threads (tables 1 and 2). ISO inch threads (tables 3 and 4) and pipe threads (tables 5 and 6). Applies to screw threads of normal length of engagement...

发布日期：1972-07-01  实施日期：1972-07-01

JIS B4445-1998

圆柱管螺纹丝锥

Hand taps for parallel pipe threads

适用范围：この規格は，呼びG1/16～G4の管用平行ねじのねじ立てに用いる管用平行ねじ用タップ(以下，タップという。)について規定する。

GB 6138-1985

攻丝前钻孔用直柄阶梯麻花钻

实施日期：1986-03-01

SJ 2495-1984

自攻螺纹

Tapping screws thread

适用范围：本标准规定了螺纹规格为ST1.5-ST9.5自攻螺钉的螺纹和螺钉尾端型式、尺寸。

发布日期：1984-09-04  实施日期：1985-03-01

ASME B5.11-1964

Spindle Noses and Adjustable Adaptors for Multiple Spindle Drilling Heads

IEC 60079-0-2011

爆炸性气体环境 第0部分:设备 一般要求

Explosive atmospheres. Part 0:Equipment. General requirements

适用范围：IEC 60079-0:2011 specifies the general requirements for construction, testing and marking of electrical equipment and Ex Components intended for use in explosive atmospheres. Electrical equipment compl...

发布日期：2011-06-22  实施日期：2011-06-22

NF C23-579-0-2013

Explosive atmospheres - Part 0 : equipment - General requirements.

BS 3409-2-1966

金属丝螺纹镶件承受孔攻螺纹(统一标准粗牙螺纹和统一标准细牙螺纹)规范 .第2部分:孔径为小于1/4英寸的孔

Lochbohrungen fuer Drahtgewindeeinsaetze (UNC) und UNF-Gewinde). Spezifikation. Durchmesser unter 1/4 Zoll Specification for The tapping of holes to receive wire thread inserts (UNC and UNF threads). P...

适用范围：Limits of size for tapped holes to accommodate wire thread inserts to provide thread sizes from No. 2 to No. 12 UNC inclusive and from No. 2 to No. 12 UNF inclusive. Recommendations for general dimensi...

实施日期：1966-01-31

BS 3409-1-1961

金属丝螺纹镶件承受孔攻螺纹(统一标准粗牙螺纹和统一标准细牙螺纹)规范.第1部分:孔径为1/4英寸以上(含1/4英寸)的孔

Lochbohrungen fuer Drahtgewindeeinsaetze (UNC) und UNF-Gewinde). Spezifikation. Durchmesser 1/4 Zoll und groesser Specification for The tapping of holes to receive wire thread inserts (UNC and UNF thre...

适用范围：Specifies limits of size for tapped holes to accommodate wire thread inserts to provide thread sizes from $9D in to 1$9H in UNC inclusive and from $9D in to 1 in UNF inclusive. It includes recommendati...

实施日期：1961-08-16

JIS B4433-1990

螺母丝锥

Nut taps

适用范围：この規格は，表1に示すめねじのねじ立てに用いるナットタップ(以下，タップという。〕について規定する。

JIS B4430-1998

公制螺纹手动丝锥

Short machine taps and hand taps for metric threads

JIS B4432-1999

统一标准螺纹手动丝锥

Short machine taps and hand taps for unified threads

适用范围：この規格は，呼びNo.1 -64UNC～4-4UNCのユニファイ並目ねじ及び呼びNo.O-8OUNF～1 1/2-12UNFのユニファイ細目ねじのねじ立てに用いるユニファイねじ用ハンドタップ(ユニファイねじ用ショートマシンタップともいう。)(以下，タップという。)について規定する。

BS 1873-1975

石油、石油化学及有关工业用钢球形阀、球形截止阀与单向阀(有法兰及对接焊端)规范

Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries

适用范围：Straight, angle and (oblique) Y pattern with flanged or butt-welding ends in nominal sizes from 15 to 400 mm ($9H to 16 in) and Class 150 to 2500.

实施日期：1975-01-01

DIN 336-2003

切割螺纹用螺纹小径钻头的直径

Diameters of drills for minor diameters of tapped threads

适用范围：This standard specifies sizes for drills to be used prior to tapping cylindrical screw threads with standard length of engagement where the drill diameter is approximately equal to the nominal thread d...