EN 60885-3-2003

Electrical test methods for electric cables Part 3: Test methods for partial discharge measurements on lengths of extruded power cables IEC 60885-3:1988

BS EN 1986-1-1997

电动道路车辆.能量特性测定.纯电动车

Elektrisch angetriebene Strassenfahrzeuge. Messverfahren fuer Energieausrutzung. Reine Elektrofahrzeuge Electrically Propelled Road Vehicles-Measurement of Energy Performances Part 1:Pure Electric Vehi...

适用范围：This standard specifies the procedure to apply in order to measure the range and the consumption of the electrically propelled road vehicles (pure electric vehicles). This standard applies to the categ...

实施日期：1997-11-15

NF E86-503-2-2004

Cryogenic vessels - Static non-vacuum insulated vessels - Part 2 : design, fabrication, inspection and testing.

DIN 802-5-1997

螺纹丝锥的公差.第5部分:ISO米制螺纹的基本螺纹丝锥.按DIN 8141-1的粗牙和细牙的界面配合螺纹

Tolerances on the threaded portion of tape - Part 5: Ground threaded taps for ISO metric thread; threads for interference fits according to DIN 8141-1, coarse and fine pitches; manufacturing tolerances...

适用范围：The document specifies the manufacturing tolerances of the threaded portion of taps used to make ISO metric threads for interference fits according to DIN 8141-1.

DIN 38402-45-2003

德国对水,废水和淤泥的统一检验法 一般说明(A组) 实验室外部质量控制的对比试验(A45)

German standard methods for the examination of water, waste water and sludge; general information (group A); Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A45)

适用范围：This standard specifies requirements on carrying out interlaboratory trials for external quality control of laboratories. With respect to the purpose the standard differs from DIN 38402-41 and DIN 3840...

BS 598-110-1998

道路和其它铺砌区用沥青混合料的取样和检验.轮辙比例和深度测定的试验方法

Probenahme und Untersuchung von bituminoesen Mischgut fuer Strassen und andere befestigte Verkehrsflaechen. Testmethoden zur Bestimmung der Radfuehrung Sampling and Examination of Bituminous Mixtures f...

适用范围：1 This part of BS 598 specifies a method for determining the susceptibility of bituminous materials to plastic deformation at high road temperatures under pressures similar to those experienced on th...

实施日期：1998-11-15

NF E22-393-2-2004

Rolling bearings - Linear motion rolling bearings - Part 2 : static load ratings.

DIN ISO 4324-1983

表面活性剂 粉状和粒状 休止角的测定

Surface active agents; powders and granules; measurement of the angle of repose

NF C90-201-1-2002

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1 : general requirements, frequency bands and electromagnetic disturbances.

BS EN 1915-3-2004+A1-2009

Aircraft ground support equipment. General requirements. Vibration measurement methods and reduction

实施日期：2004-11-04

NF P22-155-2007

Eurocode 9 - design of aluminium structures - Part 1-5 : shell structures.

EN ISO 14956-2002

Air quality. Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty ISO 14956:2002

实施日期：2002-08-01

DIN EN ISO 283-2008

Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method

实施日期：2008-02-01

DIN 28081-4-1988

锅炉型钢底脚,底脚上对锅炉壁加重力的最大力矩

Steel profile supports for vessels; maximum permissible moments on the vessel wall due to profile support loads

适用范围：This standard applies to profile supports for non-lined vessels which are predominantly used in process plants.

NF P82-702-2005

Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity.

DIN EN 81-58-2003

电梯制造和安装的安全规则 检查和试验 第58部分:井道门阻燃性能试验

Safety rules for the construction and installation of lifts - Examination and tests - Part 58: Landing doors fire resistance test

NF A49-901-1-2010

Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1 : quenched and tempered steel cylinders with tensile strength less than 1 100 MPa.

NF S66-400-2006

Explosion suppression systems.

NF P22-151/A1-2010

Eurocode 9 - Design of aluminium structures - Part 1-1 : general structural rules.

DIN 65736-7-1984

航空和航天.单槽、螺钉材料1.6604.6沉头螺钉静负荷时的螺钉计算值

Aerospace; bolt calculation values, static load, for countersunk head bolts, single shear, bolt material 1.6604.6

适用范围：Aerospace; bolt calculation values, static load, for countersunk head bolts, single shear, bolt material 1.6604.6 Aéronautique et espace; valeurs de calcul sous charge statique, pour vis à tête fraisée...