ISO 7142-2007

色漆和清漆用粘合剂 环氧树脂 一般试验法

Binders for paints and varnishes -- Epoxy resins -- General methods of test

适用范围：ISO 7142:2007 specifies general methods of test for epoxy resins for use in paints, varnishes and similar products. It is also applicable to those solutions made from epoxy resins that are intended for...

发布日期：2007-02-01  实施日期：2007-02-01

DIN EN 1113-2011

Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification; German version EN 1113:2008+A1:2011

DIN 732-2010

Rolling bearings - Thermally safe operating speed - Calculation and correction values

实施日期：2010-05-01

IEC 60560-1977

电机用刷握的定义和术语

Definitions and terminology of brush-holders for electrical machines

适用范围：Establishes a common vocabulary for terms and definitions for determining the functions and characteristics of brush-holders. Covers arrangements of brushes and boxes, pressure systems and characterist...

发布日期：1977-01-01  实施日期：1977-01-01

BS ISO 11093-5-2009

纸和纸板.硬纸板锥形圆筒的检验.同心旋转特性的测定

Papier und Pappe. Prüfung von Hülsen aus Hülsenkarton. Bestimmung der Rundlaufeigenschaften Paper and board-Testing of cores-Part 5:Determination of characteristics of concentric rotation Papier et car...

适用范围：Board (paper), Paper products, Paper, Cylindrical shape, Concentric, Thickness, Diameter, Length, Dimensional measurement, Test specimens, Roundness measurement, Straightness measurement, Test equipmen...

实施日期：2009-10-31

ASTM D5876-1995(2005)

地下水质量监测装置的地质环境勘察及安装用直接旋转钢丝外套向前钻进法的采用指南

Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices

适用范围：<p>1.1 This guide covers how direct (straight) wireline rotary casing advancement drilling and sampling procedures may be used for geoenvironmental exploration and installation of subsurface water-qual...

实施日期：1995-12-10

EN 15714-4-2009

Industrial valves. Actuators. Part 4:Hydraulic part-turn actuators for industrial valves. Basic requirements

实施日期：2009-10-01

EN 60034-30-2009

Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code)

GB/T 4772.2-1999

旋转电机尺寸和输出功率等级 第2部分:机座号355～1000和凸缘号1180～2360

Dimensions and output series for rotating electrical machines--Part 2:Frame numbers 355 to 1000 and flange numbers 1180 to 2360

适用范围：本标准适用于以下三种专门型式之一的各类卧式旋转电机——底脚向下电机、底脚向上电机和带整块底板的电机，以及具有安装凸缘，且中心高转换为底脚向下型式为355～1000mm和固定凸缘基圆直径为1180～2360mm的电机。

发布日期：1999-02-26  实施日期：1999-09-01

NF S54-201-5-2008

Playground equipment and surfacing - Part 5 : additional specific safety requirements and test methods for carousels.

GB/T 10069.2-1988

旋转电机噪声测定方法及限值 噪声简易测定方法

Measurement of dirborne noise emitted by rotating electrical machinery and the noise limits--Survey method for the measurement of airborne noise

实施日期：1989-06-30

ISO 10323-2013

Dentistry -- Bore diameters for rotary instruments such as discs and wheels

发布日期：2013-02-01  实施日期：2013-02-01

DIN V 42962-1-2010

Arrangement of terminals for rotating electrical machines - Part 1: Rated voltage 6, 6 kV

实施日期：2010-05-01

ASTM E2196-2007

用转盘式反应器量化通过切变流和连续流生长的铜绿假单胞菌生物膜的试验方法

Standard Test Method for Quantification of a Pseudomonas Aeruginosa Biofilm Grown with Shear and Continuous Flow Using a Rotating Disk Reactor

适用范围：<p id="s00013">Bacteria that exist in a biofilm are phenotypically different from suspended cells of the same genotype. The study of biofilm in the laboratory requires protocols that account for this d...

实施日期：2007-04-01

BS EN ISO 10360-1-2001

几何产品规范(GPS) 坐标测量机(CMM)的验收和复检试验 第1部分:词汇

Geometrische Produktspezifikation (GPS). Annahmepruefung und Bestaetigungspruefung fuer Koordinatenmessgeraete (KMG). Begriffe Geometrical Product Specifications (GPS)-Acceptance and Reverification Tes...

适用范围：This part of ISO 10360 establishes a vocabulary for coordinate measuring machines (CMM), and their acceptance and reverification tests.

实施日期：2001-10-01

ISO 14693-2003

石油和天然气工业 钻井和油井维护设备

Petroleum and natural gas industries -- Drilling and well-servicing equipment

适用范围：ISO 14693:2003 provides general principles and specifies requirements for design, manufacture and testing of new drilling and well-servicing equipment and of replacement primary load-carrying component...

发布日期：2003-12-01  实施日期：2003-12-01

DIN 18090-1997

电梯.有防火墙的升降井的横推和直推门

Lifts - Lift landing doors (hinged, pivoted and folding) for lift walls with walls of the fire resistance class F 90

EN 13126-9-2013

建筑五金 窗和门高窗的要求和试验方法 第9部分:水平和垂直回转窗的五金件

Building hardware. Requirements and test methods for windows and door height windows. Part 9:Hardware for horizontal and vertical pivot windows

实施日期：2013-02-01

BS EN 735-1995

旋转动态泵的总体尺寸.公差

Anschlussmasse fuer Kreiselpumpen. Toleranzen Overall Dimensions of Rotodynamic Pumps-Tolerances (Q) Dimensions d'encombrement des pompes rotodynamiques. Tolerances

适用范围：This European Standard specifies the acceptable tolerances for overall dimensions of rotodynamic pumps with particular requirements for horizontal, single stage, end suction centrifugal pumps.

实施日期：1995-01-01

SY/T 6669-2006

端盖、联结件和旋转接头规范

Specification on end closures,connectors and swivels

适用范围： 本标准适用于以下范围： a）管道端盖； b）联结件； c）管箍； d）非对中装置（旋转接头）； e）分体式管件。 本标准不适用于由其他标准规定的焊接、法兰连接或螺纹连接的管件。 附录A和附录B为采购者提供推...

发布日期：2006-11-03  实施日期：2007-04-01