Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r...
适用范围：ISO 7919-2:2009 establishes provisions for applying evaluation criteria for the severity of in-situ, broad-band shaft vibration measured radial (i.e. transverse) to the shaft axis at, or close to, the ...
发布日期：2009-10-01 实施日期：2009-10-01
Abnahmeversuche zur Bestimmung der hydraulischen Eigenschaften von Wasserturbinen,Speicherpumpen und Pumpturbinen Field Acceptance Tests to Determine the Hydraulic Performance of Hydraulic Turbines,Sto...
适用范围：Covers test arrangements, test rules, prescribes measures for disputes, computation methods, final reports
实施日期：1995-01-01
Railway rolling stock -- Auxiliary rotating electrical -- Test methods
适用范围：この規格は，鉄道車両に用いる主な補助回転機(以下，回転機という。)の試験方法について規定する。この規格の対応国際規格を，次に示す。IEC 60349:1991 Rotating electrical machines for rail and road vehicles a)回転機の節囲は，次による。整流子形補...
Mechanische Schwingungen. Bewertung der Schwingungen von Maschinen durch Messungen an rotierenden Wellen. Station?re Dampfturbinen und Generatoren über 50 MW mit Nenn-Betriebsdrehzahlen von 1500 r/min,...
实施日期：2009-11-30
Wasserturbinen,Speicherpumpen und Pumpturbinen. Ausschreibungsunterlagen. Richtlinien fuer technische Spezifikationen fuer Francis Turbinen Hydraulic Turbines,Storage Pumps,and Pump Turbines-Tendering ...
适用范围：This technical report, referred to herein as the Guide, is intended to assist in the preparation of Tendering Documents and tendering proposals and in the evaluation of tenders for hydraulic machines. ...
实施日期：1998-06-15
Hydraulische Turbinen,Pumpen und Pumpturbinen-Angebotsdokumentation-Leitfaden fuer die technische Spezifikation von Rohrturbinen Hydraulic Turbines,Storage Pumps and Pump-Turbines-Tendering Documents-P...
适用范围：This technical report, referred to herein as the Guide, is intended to assist in the preparation of Tendering documents and tendering proposals and in the evaluation of tenders for hydraulic machines. ...
实施日期：1998-09-15
Hydraulische Turbinen,Pumpen und Pumpturbinen-Angebotsdokumentation-Allgemeines und Anhaenge Hydraulic Turbines,Storage Pumps and Pump-Turbines-Tendering Documents-Part 1:General and Annexes Turbines h...
适用范围：Guide for preparation of Tendering Documents for the supply, installation and testing of hydraulic machines.
实施日期：1998-09-15
Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 4: Gas turbine sets with fluid-film bearings
实施日期：2010-06-01
Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation - Part 1: General guidelines (ISO 7919-1:1996)
适用范围：The document describes general conditions and procedures for the measurement and evaluation of radial vibration on rotating parts (shafts) of complete machines. The general evaluation criteria, which a...
Mechanical vibration -- Susceptibility and sensitivity of machines to unbalance
适用范围：Gives methods for determining machine vibration sensitivity to unbalance and provides evaluation guidelines. Makes recommendations on how to apply the numerical sensitivity values in some particular ca...
发布日期：1996-09-01 实施日期：1996-09-01
Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/mi...
适用范围：This part of ISO 7919 establishes provisions for evaluating the severity the severity of in-situ, broad-band shaft vibration measured radial(i.e. transverse)to the shaft axis at, or close to,the main b...
实施日期：2010-06-01
Test code of control systems for hydraulic turbines
适用范围：本部分规定了水轮机控制系统的试验项目、方法和条件， 并给出试验验收的一般规定。 本部分适用于工作容量350N·m及以上的水轮机调速器与油压装置。
发布日期：2007-06-21 实施日期：2008-02-01
Hydraulische Turbinen,Pumpen und Pumpturbinen-Angebotsdokumentation-Leitfaden fuer die technische Spezifikation von Kaplan-und Propellerturbinen Hydraulic Turbines,Storage Pumps and Pump-Turbines-Tende...
适用范围：This technical report, referred to herein as the Guide, is intended to assist in the preparation of Tendering Documents and tendering proposals and in the evaluation of tenders for hydraulic machines. ...
实施日期：1998-09-15
Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 3: Coupled industrial machines
适用范围：ISO 7919-3:2008 gives guidelines for applying evaluation criteria of shaft vibration under normal operating conditions, measured at or close to the bearings of coupled industrial machines.
发布日期：2009-02-01 实施日期：2009-02-01
Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 3: Coupled industrial machines
适用范围： This part of ISO 7919 gives guidelines for applying evaluation criteria of shaft vibration under normal operating conditions, measured at or close to the bearings of coupled industrial machines. Thes...
实施日期：2009-08-01
Strassenfahrzeuge. Verfahren zur Ermittlung der Bruttoleistung von Motoren Road Vehicles-Engine Test Code-Gross Power Vehicules routiers. Code d'essai des moteurs. Puissance brute
适用范围：This International Standard specifies a method for testing internal combustion engines for propulsion of road vehicles as defined in ISO 3833. It applicable to the evaluation of their performance with ...
实施日期：1998-11-15
Mechanische Schwingungen. Bewertung der Schwingungen von Maschinen durch Messungen an rotierenden Wellen. Gekuppelte industrielle Maschinen Mechanical vibration. Evaluation of machine vibration by meas...
适用范围：Vibration, Vibration measurement, Shafts (rotating), Industrial, Steam turbines, Electric generators, Turbocompressors, Turbines, Pumps, Electric machines, Electrical transmission systems, Rotating par...
实施日期：2009-03-31
请选择需要导出的字段：
请选择需要导出的字段：
知识产权声明 | 服务承诺 | 联系我们 | 客户服务 | 关于我们
互联网出版许可证：新出网证(京)字042号 互联网药品信息服务资格证书号：(京)-经营性-2011-0017 信息网络传播视听节目许可证 许可证号：0108284
万方数据标准管理系统V1.0 证书号:软著登字第4252816号
京ICP证：010071 京公网安备11010802020237号 京ICP备08100800号-1
客服电话：4000115888 客服邮箱：service@wanfangdata.com.cn 违法和不良信息举报电话：4000115888 举报邮箱：problem@wanfangdata.com.cn 举报专区：https://www.12377.cn
万方数据知识服务平台--国家科技支撑计划资助项目（编号：2006BAH03B01）©北京万方数据股份有限公司 万方数据电子出版社
