GB/T 6075.3-2001

在非旋转部件上测量和评价机器的机械振动 第3部分：额定功率大于15kW额定转速在120r/min至15000r/min之间的现场测量的工业机器。

Mechanical vibration-Evaluation of machine vibration by measurements on non-rotating parts-Part 3:lndustrial machines with niminal power above 15 KW and nominal speeds between 120r/min and 15 000 r/min...

适用范围：本标准中所提供的振动准则适用于功率大于15kW运行转速在120r/min至15000r/min的机组，例如汽轮机或电机驱动机组。　　本标准所包括的机器为:——功率不大于50MW的汽轮机；——汽轮机组功率大于50MW转速低于1500r/min或高于3600...

发布日期：2001-02-26  实施日期：2001-09-01

BS CECC 41300-1979

电子元器件质量评定协调体系.分规范.小功率单圈旋转电位器

Harmonisiertes Guetebestaetigungssystem fuer Bauelemente der Elektronik. Rahmenspezifikation:niedrig belastbare 1-Gang-Drehpotentiometer Low Power Single-Turn Rotary Potentiometers:Sectional Specificat...

适用范围：Preferred values for characteristics and ratings, also inspection requirements for single turn rotary potentiometers of assessed quality.

实施日期：1979-01-01

CNS 5669-1980

铣刀心轴

Arbors for Milling Machines

发布日期：1980-07-09  实施日期：1980-07-09

ISO 21940-31-2013

机械振动 转子平衡 第31部分：机器不平衡敏感度和不平衡灵敏度

Mechanical vibration -- Rotor balancing -- Part 31: Susceptibility and sensitivity of machines to unbalance

适用范围：ISO 21940-31:2013 specifies methods for determining machine vibration sensitivity to unbalance and provides evaluation guidelines as a function of the proximity of relevant resonance rotational speeds ...

发布日期：2013-08-01  实施日期：2013-08-01

BS IEC 61366-7-1998

液压涡轮机、蓄水泵和涡轮泵.交单.蓄水泵技术规范指南

Hydraulische Turbinen,Pumpen und Pumpturbinen-Angebotsdokumentation-Leitfaden fuer die technische Spezifikation von Pumpen Hydraulic Turbines,Storage Pumps and Pump-Turbines-Tendering Documents-Part 7:...

适用范围：This technical report, referred to herein as the Guide, is intended to assist in the preparation of Tendering Documents and tendering proposals and in the evaluation of tenders for hydraulic machines. ...

实施日期：1998-09-15

BS CECC 41400-1980

电子元器件质量评定协调体系.分规范.旋转式精密电位器

Harmonisiertes Guetebestaetigungssystem fuer Bauelemente der Elektronik:Rahmenspezifikation:Praezisions-Drehpotentiometer Rotary Precision Potentiometers:Sectional Specification Système harmonise d'ass...

适用范围：Prescribes the preferred values for characteristics and ratings and also the inspection requirements for rotary precision potentiometers of assessed quality.

实施日期：1980-01-01

CNS 5668-1980

铣刀心轴螺栓端部

Draw - in Bolt End for Milling Machine Arbors

发布日期：1980-07-09  实施日期：1980-07-09

NF J65-505-1-2004

Ships and marine technology - Propulsion plants for ships - Part 1 : vocabulary for geometry of propellers.

CNS 10999-1984

工业用直线缝纫机机头上轴部零件名词

Glossary of Terms Used in Arm-Shaft of Straight Lock Stitch Industrial Sewing Machine

发布日期：1984-09-19  实施日期：1984-09-19

NF J65-505-2-2003

Ships and marine technology - Propulsion plants for ships - Part 2 : vocabulary for controllable-pitch propeller plants.

BS CECC 41100-1978

电子元器件质量评定协调体系.分规范.螺杆传动和旋转的预调电位器

Harmonisiertes Guetebestaetigungssystem fuer Bauelemente der Elektronik. Rahmenspezifikation:Trimmpotentiometer mit Einstellung durch Gewinndespindel oder durch direktes drehen Lead Screw Actuated and ...

适用范围：Ratings, characteristics and inspection requirements.

实施日期：1978-01-01

BS 4506-1970

轴端规范

Schaftenden. Spezifikation Specification for Shaft Ends Embouts d'arbres. Specification Amd 2027:June 1976

适用范围：Specifies shapes and sizes of cylindrical and conical shaft ends with keyways in diameters 6 mm to 630 mm inclusive. Provision is made for both long and short series and for external and internal screw...

实施日期：1970-01-19

BS EN ISO 7785-1-1999

手持式牙科器械.高速空气涡轮钻头

Zahnaerztliche Handstuecke. Schnellaufende luftbetriebene Turbinen-Handstuecke Dental Handpieces-Part 1:High-Speed Air Turbine Handpieces Pieces a main dentaires. Pieces a main a turbines a air comprim...

适用范围：Dental handpieces, Dental instruments, Dental equipment, Dentistry, Air, Turbines, Velocity, Performance, Classification systems, Design, Shape, Dimensions, Chucks, Accessories, Rotating parts, Test eq...

实施日期：1999-10-15

GB/T 11348.2-1997

旋转机械转轴径向振动的测量和评定 第2部分:陆地安装的大型汽轮发电机组

Mechanical vibration of non-reciprocating machines--Measurements on roatating shafts and evaluation criteria--Part 2:Large land-based steam turbine generator sets

实施日期：1998-01-01

DIN 2079-1987

机床 锥度7:24的轴头

7/24 tapers for spindle noses for machine tools

GB/T 6075.3-2011

机械振动 在非旋转部件上测量评价机器的振动 第3部分：额定功率大于15kW额定转速在120 r/min至15000r/min之间的在现场测量的工业机器

Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3：Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 ...

适用范围：本部分给出了现场测量时评枯振动水平的准则，该准则适用于功率大于 15 kw 、运行转速在 120r / min 至 15 000r / min 的机组。

发布日期：2011-12-30  实施日期：2012-10-01

BS ISO 15230-2007

Mechanische Schwingungen und St??e. Ankopplungskr?fte der Hand an Maschinengriffen bei Einwirkung von Hand-Arm-Schwingungen Mechanical vibration and shock. Coupling forces at the man-machine interface for hand-transmitted vibration Vibrations et chocs mécaniques. Forces de couplage. l'interface homme-machine en cas de vibrations transmises par les mains

实施日期：2007-08-31

ISO 15230-2007

机械振动与冲击 手传振动在人机界面的耦合力

Mechanical vibration and shock -- Coupling forces at the man--machine interface for hand-transmitted vibration

适用范围：ISO 15230:2007 describes the coupling parameters between the hands of a machine operator and a vibrating surface of the machine. The coupling between the hand and the vibrating surface can be described...

发布日期：2007-07-01  实施日期：2007-07-01

NF E90-010-2007

Mechanical vibration and shock - Coupling forces at the machine-man interface for hand-transmitted vibration.

JIS C5260-2-2-2000

电子设备可变电阻器－第2部分:品种类别通则　第2节:空白详细规范:螺纹驱动形及旋转型半固定可变电阻器评价标准F

Potentiometers for use in electronic equipment -- Part 2: Blank detail specification: Lead-screw actuated and rotary preset potentiometers Assessment level F

适用范围：この規格は，JIS C 5260-2を品種別通則とするプランク個別規格で,ねと駆動形及び回転形半固定可変抵抗器評価水準F（以下.可変祇抗器という。）について規定する。