EN 462-5-1996

无损检测.射线照片质量.第5部分:图象质量检验指示器(双束型).图象反差值

Non-Destructive Testing. Image Quality of Radiographs. Part 5:Image Quality Indicators (Duplex Wire Type),Determination of Image Unsharpness Value

实施日期：1996-01-01

ISO 14096-1-2005

无损检验 X射线照相胶片数字化系统的质量鉴定 第1部分:定义、成像质量参数和标准参考胶片的定量测量以及定性控制

Non-destructive testing qualification of radiographic film digitisation systems. Part 1:Definitions,quantitative measurements of image quality parameters,standard reference film and qualitative control...

适用范围：This European Standard specifies procedures for the evaluation of basic performance parameters of the radiographic film digitisation process such as spatial resolution and spatial linearity, density ra...

实施日期：2005-06-15

BS EN 14584-2013

无损检测.声学辐射检测.验收试验过程中金属压力设备的检查 AE源的平面位置

Non-destructive testing. Acoustic emission testing. Examination of metallic pressure equipment during proof testing. Planar location of AE sources

发布日期：2013-05-31  实施日期：2013-05-31

ISO 9583-1993

外科植入物 无损试验 金属外科植入物的液体渗透检验

Implants for surgery -- Non-destructive testing -- Liquid penetrant inspection of metallic surgical implants

适用范围：The method for detecting and evaluating internal imperfections shall be performed in accordance with the requirements in ISO 3452. Guidance on the acceptance limits for surface imperfections in the raw...

发布日期：1993-10-01  实施日期：1993-10-01

ISO 16831-2012

无损检验 超声检测 超声波厚度测量设备的表征和验证

Non-destructive testing -- Ultrasonic testing -- Characterization and verification of ultrasonic thickness measuring equipment

适用范围：ISO 16831:2012 specifies methods and acceptance criteria for assessing the performance of instruments for measuring thickness using pulse-echo ultrasound. ISO 16831:2012 covers both direct (digital) re...

发布日期：2012-04-01  实施日期：2012-04-01

EN 13100-2-2004

Non-destructive testing of welded joints in thermoplastics semifinished products. Part 2:X-ray radiographic testing

实施日期：2004-11-01

BS EN 12517-2-2008

Zerst?rungsfreie Prüfung von Schwei?verbindungen. Bewertung von Schwei?verbindungen in Aluminium und seinen Legierungen mit Durchstrahlung. Zul?ssigkeitsgrenzen Non-destructive testing of welds Part 2:Evaluation of welded joints in aluminium and its alloys by radiography. Acceptance levels Essais non destructifs des assemblages soudés. ?valuation par radiographie des assemblages soudés en aluminium et ses alliages. Niveaux d'acceptation

实施日期：2008-09-30

NF A09-201-2014

Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules

BS EN ISO 10447-2007

Widerstandsschwei?en. Sch?l-,Mei?el-und Keilprüfung von Widerstandspunkt-und Buckelschwei?verbindungen Resistance welding. Peel and chisel testing of resistance spot and projection welds Soudage par résistance. Essais de déboutonnage au burin et de pelage appliqués aux soudures par résistance par points et par bossages

实施日期：2007-07-31

DIN EN 12544-1-1999

无损检测.X射线管电压的测量和评定.第1部分:电压分级法

Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method; German version EN 12544-1:1999

ISO 19232-4-2013

无损检测 射线照相质量 第4部分：照相质量数值和照相质量表的实践评定

Non-destructive testing -- Image quality of radiographs -- Part 4: Experimental evaluation of image quality values and image quality tables

适用范围：ISO 19232-4:2013 gives instructions for the determination of image quality values and image quality tables. If the IQI requirements specified in ISO 19232?3 cannot be used because, for example, the abs...

发布日期：2013-06-01  实施日期：2013-06-01

BS EN 12504-2-2012

结构用的混凝土试验 无损检验 回弹数的测定

Testing concrete in structures. Non-destructive testing. Determination of rebound number

发布日期：2013-01-31  实施日期：2013-01-31

GB/T 12604.1-2005

无损检测术语超声检测

Non-destructive testing-Terminology-Terms used in ultrasonic testing

适用范围：本标准界定了用于超声无损检测方法的术语，作为标准和一般使用的共同基础。

发布日期：2005-06-08  实施日期：2005-12-01

NF A09-250-1-2000

Non-destructive testing - Radioscopic testing - Part 1 : quantitative measurement of imaging properties.

BS EN 14430-2004

釉和搪瓷.高压试验

Emails und Emaillierungen. Hochspannungspruefung Vitreous and porcelain enamels High voltage test Emaux vitrifies. Essai sous haute tension

适用范围：This document describes 2 test methods of high voltage testing: — Test A is used to detect and locate defects in vitreous and porcelain enamels; — Test B is used to detect and locate defects and weak...

实施日期：2004-12-06

JB/T 9218-2007

无损检测渗透检测

实施日期：2008-01-01

DIN EN ISO 3452-3-1999

无损检测.渗透探伤.第3部分:参考试验块

Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:1998); German version EN ISO 3452-3:1998

适用范围：This document describes two reference blocs used for the determination of the sensitivity of penetrant (type 1) or for the periodic checking of penetrant facilities (type 2).

NF A91-112-1995

磁性基底金属上的非磁性金属镀层.镀层厚度的测量.磁性法

Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method.

NF A49-785-10-2011

Non destructive testing of steel tubes - Part 10 : automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfect

BS 2633-1987

输送流体用铁素体钢管道工程的一级电弧焊规范

Class I Arc Welding of Ferritic Steel Pipework for Carrying Fluids AMD 9800:February 1998;

适用范围：Arc welding using manual, semi-automatic or automatic processes; parent metals, welding consumables, preparation for welding, butt joints, branches, attachments, flanges, inspection, acceptance criteri...

实施日期：1987-05-28