BS EN 61300-3-29-2006

Lichtwellenleiter. Verbindungselemente und passive Bauteile. Grundlegende Pruef-und Messverfahren. Untersuchungen und Messungen. Messverfahren zur Charakterisierung der spektralen Uebertragungsfunktion von DWDM-Bauteilen Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-29:Examinations and measurements. Measurement techniques for characterizing amplitude of the spectral transfer function of DWDM components Dispositifs d'interconnexion et co

实施日期：2006-07-31

IEC 61753-111-8-2009

纤维光学互连器件和无源元件性能标准 第111-8部分:G类用密封外壳 地面

Fibre optic interconnecting devices and passive components performance standard - Part 111-8: Sealed closures for category G - Ground

适用范围：IEC 61753-111-8:2009 contains the minimum test and measurement requirements and severities which a sealed fibre optic closure must satisfy in order to be categorised as meeting the IEC standard for cat...

发布日期：2009-11-10  实施日期：2009-11-10

IEC 60869-1-1999

纤维光学衰减器 第1部分:总规范

Fibre Optic Attenuators. Part 1:Generic Specification Attenuateurs A Fibres Optiques. Partie 1:Specification Generique Third Edition;IECQ QC 800000

适用范围：This part of IEC 60869 applies to fibre optic attenuators. These have all of the following general features: - they are passive in that they contain no opto-electronic or other transducing elements; -...

实施日期：1999-11-01

NF C93-878-3-2-2007

Passive components to be used in optical fibre communication systems - Product specifications - Part 3-2 : type 4 / 8 channel CWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre.

DIN EN 61753-088-2-2013

Fibre optic interconnecting devices and passive components - Performance standard - Part 088-2: Non-connectorized single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C - Controlled environments (IEC 61753-088-2:2013); Ger

EN 50378-3-2-2007

Passive components to be used in optical fibre communication systems - Product specifications - Part 3-2: Type 4 / 8 channel CWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre

DIN EN 61300-2-15-2008

纤维光学互连器件和无源器件 基本试验和测量程序 第2-15部分:试验 锁紧机构的扭转强度

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-15: Tests - Torque strength of coupling mechanism

实施日期：2008-09-01

IEC 62343-3-1-2010

动态模块 第3-1部分:性能规范模板 动态信道均衡器

Dynamic modules. Part 3-1:Performance specification templates. Dynamic channel equalizers Modules dynamiques. Partie 3-1:Modèles de spécification de performance. Egaliseurs de canaux de transmission dy...

适用范围：This part of IEC 62343 provides a performance specification template for the dynamic channelequaliser (DCE). The object of this performance specification template is to provide a framefor the preparati...

发布日期：2010-04-28  实施日期：2010-04-01

IEC 61753-057-2-2012

Fibre optic interconnecting devices and passive components - Performance standard - Part 057-2: Single mode fibre plug-receptacle style optical fuse for category C - Controlled environment

发布日期：2012-12-05  实施日期：2012-12-05

IEC 62037-6-2013

Passive RF and microwave devices, intermodulation level measurement - Part 6: Measurement of passive intermodulation in antennas

发布日期：2013-01-16  实施日期：2013-01-16

IEC 61753-121-2-2010

纤维光学互连器件和无源元件性能标准 第121-2部分:C类用单芯和双芯单模光纤和圆柱形套管连接器 受控环境

Fibre optic interconnecting devices and passive components. Performance standard. Part 121-2:Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C. Controlle...

适用范围：This part of IEC 61753 specifies the test requirements for finished cable assemblies for useas patchcords, work area cords and equipment cords for applications in a controlled (C)environment according ...

发布日期：2010-04-28  实施日期：2010-04-01

IEC 61300-2-6-2010

纤维光学互连器件和无源器件 基本试验和测量程序 第2-6部分:试验 锁紧机构抗拉强度

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism

适用范围：IEC 61300-2-6:2010 describes a test to ensure that the coupling mechanism of a connector set or connector and device combination will withstand the axial loads likely to be applied during normal servic...

发布日期：2010-12-09  实施日期：2010-12-09

BS EN 61753-092-6-2007

Lichtwellenleiter. Verbindungselemente und passive Bauteile. Betriebsverhalten. Nicht mit Steckern versehene Einmoden-LWL-Zirkulatoren der Kategorie O. Freiluftanlagen und Prüffolge Fibre optic interconnecting devices and passive components performance standard. Part 092-6:Non-connectorized single-mode circulators for category O. Uncontrolled environment and sequential test The Norme de qualit de fonctionnement des dispositifs d'interconnexion et composants passifs. fibres optiques. Circulateurs

实施日期：2007-12-31

IEC 61300-3-46-2011

纤维光学互连器件和无源器件 基本试验和测量程序 第3-46部分:测量 MT套管中导向销的孔径

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-46: Measurement - Bore diameter for guide pin in MT ferrules

适用范围：IEC 61300-3-46:2011 provides a standard for the measurement of guide pin bore diameters in thermoplastic and thermoset MT ferrules specified in IEC 61754-5.

发布日期：2011-06-16  实施日期：2011-06-16

BS EN 62040-3-2011

Uninterruptible power systems (UPS). Method of specifying the performance and test requirements

发布日期：2012-05-31 

BS EN 61300-2-18-2005

光纤互联装置和无源部件.基本试验和测量步骤.干热.耐高温试验

Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Dry heat. High temperature endurance

适用范围：The purpose of this part of IEC 1300 is to determine the suitability of a fibre optic device to withstand the environmental condition of extended high temperature (dry heat) which may occur in actual u...

实施日期：2006-01-23

IEEE 1904.1-2013

Service Interoperability in Ethernet Passive Optical Networks (SIEPON)

实施日期：2013-06-14

EN 4818-2012

Aerospace series. Passive HF RFID tags intended for aircraft use

实施日期：2012-05-01

DIN EN 60869-1-2001

纤维光学衰减器.第1部分:通用规范

Fibre optic attenuators - Part 1: Generic specification (IEC 60869-1:1999); German version EN 60869-1:2000

适用范围：The document applies to fibre optic attenuators. These have all of the following general features: They are passive in that they contain no opto-electronic or other transducing elements. They have two ...

实施日期：2001-04-01

IEC 62149-5-2009

光纤有源元件和器件 性能标准 第5部分:带LD驱动器和CDR ICs的ATM-PON收发器

Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs

适用范围：IEC 62149-5:2009 specifies performance on the transceiver modules for asynchronous-transfer-mode passive optical network (ATM-PON) systems recommended by the International Telecommunication Union (ITU)...

发布日期：2009-08-11  实施日期：2009-08-11