NF C93-021-1998

电子元件 绕接 方接头和矩形接头的使用规范 一般规定

Solderless connections. Part 1 : wrapped connections. General requirements, test methods and practical guidance.

BS EN 60512-12-7-2001

电子设备连接器 试验和测量 第12-7部分:锡焊试验 试验12g:易焊性,润湿平衡方法 IEC 60512-12-7:2001

Steckverbinder fuer elektronische Einrichtungen. Mess-und Pruefverfahren. Pruefungen der Loetbarkeit. Pruefung 12g. Loetbarkeit,Loetwaage-Verfahren Connectors for Electronic Equipment-Tests and Measure...

适用范围：This part of IEC 60512, when required by the detail specification, is to be used for testing connectors within the scope of IEC technical committee 48. This test may also be used for similar components...

实施日期：2001-09-15

DIN EN 2591-424-2002

航空和航天 电器和光学仪器连接件 试验方法 第424部分:非钎焊卷曲接头的拔出力

Aerospace series - Elements of electrical and optical connection - Test methods - part 424: stripping force, solderless wrapped connections

适用范围：The project specifies a method of determining the stripping force of solderless wrapped connections used in elements of connection. It shall be used together with EN 2591.

IEC 60512-16-20-1996

电子设备用机电元件 基本试验规程和测量方法 第16部分:接触件及引出端机械试验 第20节:试验16t:机械强度(无焊连接绕线端)

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations - Section 20: Test 16t: Mechanical streng...

适用范围：Details a standard method to assess the mechanical strength of solderless connections including integrated strain relief features.

发布日期：1996-07-31  实施日期：1996-07-31

BS EN 60169-23-1994

射频连接器.针式和插座连接器用于外导体内径为3.5mm(0.1378in)的3.5mm精密同轴线路

HochfrequenzSteckverbindungen. Stiftund Buchsenstecker fuer 3,5 mm PraezisionskoaxialLeitungen mit einem Innedurchmesser des Aussenleiters von 3,5 mm (0,1378 in) Radio-Frequency Connectors Part 23:Pin ...

适用范围：Coaxial line devices and systems are becoming more prevalent at frequencies above 18 GHz. This standard covers a precision pin and socket connector for use with 3,5 mm rigid precision coaxial lines so ...

实施日期：1994-01-01

DIN EN 60352-7-2003

非焊接连接 第7部分:弹簧夹连接 一般要求,试验方法和应用导则

Solderless connections - Part 7: Spring clamp connections; General requirements, test methods and practical guidance (IEC 60352-7:2002)

实施日期：2003-07-01

DIN EN 2591-319-1997

航空和航天.光和电连接元件.试验方法.第319部分:非焊接外壳连接的气密性

Aerospace series - Elements of electrical and optical connection; test methods - Part 319: Gastightness of solderless wrapped connections; German version EN 2591-319:1997

适用范围：The document specifies a method of verifying the gas-tightness of a solderless wrapped connection. It shall be used together with EN 2591.

DIN EN 60352-6-1998

无缝焊接.第6部分:隔绝穿刺连接.通用要求,试验方法和实用导则

Solderless connections - Part 6: Insulation piercing connections; general requirements, test methods and practical guidance (IEC 60352-6:1997); German version EN 60352-6:1997

适用范围：The document is applicable to insulation piercing connections made with strandet wires and tinsel-wire, flat conductors and flat flexible circuitries for use in telecommunication equipment and in elect...

EN 60352-3-1994

Solderless Connections Part 3: Solderless Accessible Insulation Displacement Connections - General Requirements, Test Methods and Practical Guidance (IEC 352-3: 1993)

BS EN 61984-2009

连接器 安全要求和试验 IEC 61984:2001

Steckverbinder. Sicherheitsanforderungen und Prüfungen Connectors. Safety requirements and tests Connecteurs. Exigences de sécurit et essais

适用范围：This International Standard applies to connectors with rated voltages above 50 V and up to 1000 V a.c. and d.c. and rated currents up to 125 A per contact, for which either no detail specification (DS)...

实施日期：2009-07-31

EN 60512-1-2001

Connectors for Electronic Equipment - Tests and Measures Part 1: General IEC 60512-1:2001

BS 7588-1993

分层互连技术导则

Leitfaden fuer die hierarchische Verbindungstechnologie Guide to Hierarchical Interconnection Technology Guide de technologie d'interconnexion hierarchique

适用范围：Provides a guide to an interconnection system for circuit board partitioning, allowing for a modular construction and solderless assembly of the sub-units.

实施日期：1993-03-15

BS EN 60512-1-3-1997

电子设备用机电组件.基本试验过程和测量方法.常规.试验1c.电接合长度

Elektrisch-mechanische Bauelemente fuer elektronische Einrichtungen. Mess-und Pruefverfahren. Allgemeine Untersuchungen. Pruefung 1c. Kontaktueberdeckung Electromechanical Components for Electronic Equ...

适用范围：This section of IEC 60512-1, when required by the detail specification, is used for testing electromechanical components within the scope of IEC technical committee 48. This test may also be used for s...

实施日期：1997-12-15

EN 60352-2-2006

Solderless Connections Part 2: Crimped Connections - General Requirements, Test Methods and Practical Guidance IEC 60352-2: 2006

DIN EN 60352-4-2001

无焊连接.第4部分:无焊非入绝缘置换连接.通用要求、试验方法和实用导则

Solderless connections - Part 4: Solderless non-accessible insulation displacement connections; general requirements, test methods and practical guidance

适用范围：The document applicable to insulation displacement connections which are non-accessible for test and measurements.

实施日期：2001-09-01

EN 60352-1-1997

Solderless Connections Part 1: Wrapped Connections - General Requirements, Test Methods and Practical Guidance IEC 60352-1: 1997

DIN EN 60352-2-2006

Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance (IEC 60352-2:2006)

实施日期：2007-03-01

BS EN 2591-417-2001

光电连接元件 试验方法 第417部分:抗拉强度(压接连接)

Luft-und Raumfahrt. Elektrische und optische Verbindungselemente. Pruefverfahren. Zugfestigkeit (Crimpverbindung) Elements of Electrical and Optical Connection-Test Methods-Part 417:Tensile Strength (C...

适用范围：To be read in conjunction with EN 2591-100

实施日期：2001-12-13

DIN EN 3645-001-2008

Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 ℃ or 200 ℃ continuous - Part 001: Technical specification

实施日期：2008-03-01

BS EN 60352-7-2002

无焊连接 第7部分:弹簧夹连接 一般要求,试验方法和应用导则 校正14239:2002年11月13日

Loetfreie Verbindungen. Federklemmverbindungen. Allgemeine Anforderungen,Pruefverfahren und Anwendungshinweise Solderless Connections-Part 7:Spring Clamp Connections-General Requirements,test methods a...

适用范围：This part of IEC 60352 is applicable to spring-clamp connections made with stripped wire without further preparation: - solid conductors of 0,32 mm to 3,7 mm nominal diameter (0,08 mm<up2> to 10 mm<...

实施日期：2002-11-06