DIN 73011-1983

汽车; 轿车变速齿轮箱的换档次序

Motor vehicles; gear lay-outs for manual transmissions in passenger cars

适用范围：Motor vehicles, gear lay-outs for manual transmissions in passenger cars Véhicules à moteur, Arrangements des vitesses pour les bo?tes de vitesse des véhicules particuliers

BS AU 203A-1988

Nutzkraftwagen;Masse der Verbindungen zwischen Nebenabtrieben und Anbaugeraeten Dimensions of Couplings Between Power Take offs (PTOs) and Ancillary Driven Units on Commercial Road Vehicles Dimensions des liaisons entre prises de puissance et organes recepteurs de puissance sur les vehicules utilitaires. Specifications

实施日期：1988-01-01

ISO 13929-2001

小艇 操舵装置 齿轮传动连接系统

Small craft -- Steering gear -- Geared link systems

发布日期：2001-01-01  实施日期：2001-01-01

DIN 3990-5-1987

圆柱齿轮和伞齿轮承载能力的计算 齿形参数ＺH

Calculation of load capacity of cylindrical gears; endurance limits and material qualities

适用范围：The standard accounts for specifications as to the permanently endurable contact stresses (pitting endurance limits) and tooth root stresses (tooth root endurance limits). Moreover it presents requirem...

BS AU 215-2-1987

Nebenabtriebe. Anschlussbild fuer seitliche Nebenabtriebe an Nutzkraftfahrzeugen Power Take-Offs (PTOs) Part 2:Dimensions of Side Openings for Commercial Road Vehicles Prises de puissance. Dimensions des fenetres laterales pour prises de puissance de vehicules routieres utilitaires. Specifications

实施日期：1987-01-01

NF E66-242-1977

栓传动等腰铣刀

Double equal angle cutters with key drive.

实施日期：1977-12-01

BS A 328-2-1999

Hilfsantriebe und Montageflansche (metrische Reihe). Masse Accessory Drives and Mounting Flanges (Metric Sizes)-Part 2:Dimensions Aeronautique et espace. Fixation et entrainement des equipements (serie metrique). Dimensions ISO 8399-2:1998;

实施日期：1999-02-15

DIN 8651-1990

机床的验收条件 双柱偏心压力机

Machine tools; straight sided power presses; acceptance conditions

适用范围：The standard describes, with reference to DIN 8601, geometrical tests for straight sided mechanical presses up to 2500 kN nominal capacity and gives the corresponding tolerances.

BS ISO 12256-2002

内十字头棱纹驱动器 米制系列

Luft-und Raumfahrt. Gerippte Kreuzschlitze. Metrische Reihe Aerospace. Drives,internal,cruciform,ribbed. Metric series Aéronautique et espace. Empreintes cruciformes,avec saillies antidérapantes. Série...

适用范围：This International Standard specifies the dimensions of metric internal cruciform ribbed drives used in metric screws in the nominal thread diameter range of 3 mm to 20 mm. Drivers and gauges used in c...

实施日期：2002-09-26

NF E66-245-1975

栓传动变换齿圈三面铣刀

Side and face cutters with staggered tooth with key drive.

NF E22-625-1988

固定环连接 在带有锥形外表面的中间套简的园柱支承面上 计算

Mechanical transmissions. Concentric assemblies on cylindrical carried with intermediate bush with conical external surface. Calculation.

实施日期：1988-12-01

BS ISO 701-1998

International gear notation. Symbols for geometrical data

NF E22-604-1985

联轴节 工业万向接传动 用法兰盘固定

Couplings. Industrial cardan shaft. Flange mounting.

实施日期：1985-08-01

GB 1243.1-1983

传动用短节距精密滚子链

实施日期：1984-10-01

JB/T 7684-1995

LAK 鞍形块弹性联轴器

实施日期：1996-07-01

NF L07-181-1970

机械装置图形符号

Graphical symbols for aircraft mechanical systems.

实施日期：1970-10-01

DIN 3990-2-1987

圆柱齿轮和伞齿轮承载能力的计算；齿形参数ＹF

Calculation of load capacity cylindrical gears; calculation of pitting resistance

GB/T 11616-1989

同步带尺寸

Synchronous belts--Dimensions

适用范围：本标准规定了一般传动装置用同步带的型式、尺寸、标记和长度测量方法。　本标准不适用于圆弧齿同步带和汽车用同步带。

发布日期：1989-08-29  实施日期：1990-07-31

UL 745-2-12-2007

混凝土振动器的具体要求

UL Standard for Safety Particular Requirements for Concrete Vibrators Second Edition

适用范围：This clause of Part 1 is applicable except as follows: Replacement: This standard applies to concrete vibrators, the active part (vibrator bottle) of which is intended to be immersed into the mass of c...

实施日期：2007-12-07

NF E04-015-1/A1-2004

Kinematic diagrams - Graphical symbols - Part 1 : amendment 1.