BS EN 60601-2-52-2010

Medizinische elektrische Ger?te. Besondere Festlegungen für die Sicherheit einschlie?lich der wesentlichen Leistungsmerkmale von medizinischen Betten Medical electrical equipment Part 2-52:Particular requirements for basic safety and essential performance of medical beds Appareils électromédicaux. Exigences particulières pour la sécurit de base et les performances essentielles des lits médicaux

实施日期：2010-05-31

BS EN ISO 7291-2010

气焊设备 用于不超过300bar的焊接,切割和结合工艺用汇流系统的压力调节器 替代BS EN 961:1996

Gasschwei?ger?te. Hauptstellendruckregler für Schwei?en,Schneiden und verwandte Prozesse bis 30 MPa (300 bar) Gas welding equipment. Pressure regulators for manifold systems used in welding,cutting and...

实施日期：2010-12-31

ISO 4671-2007

橡胶和塑料软管和软管组件 软管尺寸和软管组件长度的测量方法

Rubber and plastics hoses and hose assemblies -- Methods of measurement of the dimensions of hoses and the lengths of hose assemblies

适用范围：ISO 4671:2007 specifies methods of measuring the inside diameter, outside diameter (including diameter over reinforcement of hydraulic hoses), wall thickness, concentricity and lining and cover thickne...

发布日期：2007-12-01  实施日期：2007-12-01

EN ISO 22476-1-2012

岩土工程勘察和测试 现场检测 第1部分:电气锥体和孔压静力渗透试验

Geotechnical investigation and testing. Field testing. Part 1:Electrical cone and piezocone penetration test

实施日期：2012-09-01

BS 1722-12-2006

栅栏.钢栅栏规范

Fences. Part 12:Specification for steel palisade fences CORR 17439:October 31,2007

适用范围：This part of BS 1722 specifies requirements for steel palisadefences and gates for general purposes (“GP” fences) in corrugatedand angle pales for heights up to 2.4 m, and for security purposes(“SP” fe...

实施日期：2006-11-30

DIN EN 60512-16-16-2009

电子设备用连接器 试验和测量 第16-16部分:接触件及引出端机械试验 试验16p:固定插片抗扭强度

Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs

实施日期：2009-03-01

BS 5733-2010

Allgemeine Anforderungen fuer Elektrozubehoer General requirements for electrical accessories. Specification Specification des prescriptions generales des accessoires electriques.

实施日期：2010-07-31

BS EN 60512-16-6-2008

Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16f. Robustness of terminations

实施日期：2009-01-31

NF C57-111-2-2007

Photovoltaic (PV) module safety qualification - Part 2 : requirements for testing.

DIN EN 15092-2008

Building valves - Inline hot water supply tempering valves - Tests and requirements

实施日期：2008-09-01

DIN EN 13001-3-1-2013

Cranes - General design - Part 3-1: Limit states and proof competence of steel structure; German version EN 13001-3-1:2012+A1:2013

DIN ISO 6292-2013

Powered industrial trucks and tractors – Brake performance and component strength (ISO 6292:2008)

发布日期：2013-10-01  实施日期：2013-10-01

BS ISO 9465-2012

Alpine ski-bindings. Lateral release under impact loading. Test method

发布日期：2012-06-30  实施日期：2012-06-30

NF A03-155-4-2007

Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4 : test method for metallic and non-metallic coatings.

BS ISO 16750-3-2007

Stra?enfahrzeuge. Umgebungsbedingungen und Prüfungen für elektrische und elektronische Ausrüstungen. Mechanische Beanspruchungen Road vehicles. Environmental conditions and testing for electrical and electronic equipment. Part 3:Mechanical loads Véhicules routiers. Spécifications d'environnement et essais des équipements électrique et électronique. Contraintes mécaniques

实施日期：2007-08-31

BS EN ISO 3738-1-2010

Hartmetalle Rockwell-H?rteprüfung (Skala A). Prüfverfahren Hardmetals. Rockwell hardness test (scale A) Part 1:Test method Métaux-durs. Essai de duret Rockwell (échelle A). Méthode d'essai

实施日期：2010-05-31

BS EN 61300-2-8-1997

光纤互联装置和无源部件.基本试验和测量步骤.连续冲击试验

Lichtwellenleiter. Verbindungselemente und passive Bauteile. Grundlegende Pruef-und Messverfahren. Pruefungen. Dauerschock Fibre Optic Interconnecting Devices and Passive Components-Basic Test and Meas...

适用范围：The purpose of this part of IEC 1300 is to reveal mechanical weakness and/or degradation of fibre optic devices when subjected to repetitive shocks. It simulates repetitive shocks likely to be encounte...

实施日期：1997-10-15

BS EN ISO 898-5-2012

Mechanical properties of fasteners made of carbon steel and alloy steel. Set screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread

发布日期：2012-06-30  实施日期：2012-06-30

ISO 4965-1-2012

金属材料 动力校正的单轴疲劳试验 第1部分:测试系统

Metallic materials -- Dynamic force calibration for uniaxial fatigue testing -- Part 1: Testing systems

适用范围：ISO 4965-1:2012 describes two methods for determining the relationship between the dynamic force range applied to a test-piece in a uniaxial, sinusoidal, constant amplitude test and the force range ind...

发布日期：2012-07-01  实施日期：2012-07-01

BS 8474-2006

Furniture. Chairs with electrically operated support surfaces. Requirements CORR 16556:August 2006;AMD 1:January 2008

实施日期：2006-07-31