DIN EN ISO 10101-3-1998

天然气.卡费歇法测定水含量.第3部分:卡路里计测量程序

Natural gas - Determination of water by the Karl Fischer method - Part 3: Coulometric procedure (ISO 10101-3:1993); German version EN ISO 10101-3:1998

适用范围：The document specifies a coulometric procedure for the determination of water using the Karl Fischer method. The method applies to natural gas and other gases which do not react with Karl Fischer reage...

DIN EN 60068-3-2-2000

环境试验.第3部分:背景资料.第2节:温度/低气压组合试验

Environmental testing - Part 3: Background information; section 2: Combined temperature/low air pressure tests (IEC 60068-3-2:1976); German version EN 60068-3-2:1999

适用范围：For the combined temperature/low air pressure tests described in this publication, a range of air pressures covering ground or aircraft applications is considered. Air pressures below 10 mbar are outsi...

实施日期：2000-02-01

DIN EN 46-1-2010

Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 1: Application by surface treatment (laboratory method)

实施日期：2010-03-01

NF G35-050-2005

Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test.

DIN EN ISO 4259-2006

Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:2006); German version EN ISO 4259:2006

实施日期：2007-02-01

DIN EN 60068-2-52-1996

环境试验.第2部分:试验.试验Kb:盐雾循环(氯化钠溶液)

Environmental testing - Part 2: Tests, Test Kb: Salt mist, cyclic (sodium chloride solution) (IEC 60068-2-52:1996); German version EN 60068-2-52:1996

适用范围：This test is intended for application to components or equipment designed to withstand extreme conditions of salt laden atmosphere, depending on the chosen severity. Salt can degrade the performance of...

BS EN ISO 23279-2010

Zerst?rungsfreie Prüfung von Schwei?verbindungen. Ultraschallprüfung. Charakterisierung von Anzeigen in Schwei?n?hten Non-destructive testing of welds. Ultrasonic testing. Characterization of indications in welds Contr?le non destructif des assemblages soudés. Contr?le par ultrasons. Caractérisation des indications dans les assemblages soudés

实施日期：2010-03-31

EN ISO 15106-3-2005

Plastics. Film and sheeting. Determination of water vapour transmission rate. Part 3:Electrolytic detection sensor method ISO 15106-3:2003

实施日期：2005-02-01

DIN CEN/TS 15053-2005

无损检验 检验试件不均匀缺陷的建议

Non-destructive testing - Recommendations for discontinuities-types in test specimens for examination

适用范围：To define discontinuity types to be exhibited in test specimens for use in NDT personnel qualification examinations.

实施日期：2005-10-01

NF C93-701-1998

Test methods for electrical materials, interconnection structures and assemblies. Part 1 : general test methods and methodology.

BS EN IS0 22825-2006

Non-destructive testing of welds. Ultrasonic testing. Testing of welds in austenitic steels and nickel-based alloys

EN ISO 10545-5-1997

Ceramic Tiles. Part 5:Determination of Impact Resistance by Measurement of Coefficient of Restriction ISO 10545-5:1996,Including Technical Corrigendum 1:1996

实施日期：1997-09-01

DIN EN 993-19-2004

成形致密耐火制品的试验方法 第19部分:以差分法测定热膨胀率

Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differential method

适用范围：The European standard specifies a method for determining the thermal expansion of dense shaped refractory products at rising temperature by a differential method. The method is applicable to a maximum ...

DIN 52367-2002

木屑板.与板面平行的抗剪切强度的测定

Particleboards - Determination of shear strength parallel to the surface

适用范围：The document specifies a test method for the determination of the shear strength of particleboards (flat pressed boards) parallel to the plane of the board.

BS EN 658-4-2003

高技术陶瓷 常温下陶瓷复合材料的机械性能 第4部分:用带锯齿的工具加压载荷法对剪切强度的测定

Hochleistungskeramik. Mechanische Eigenschaften von keramischen Verbundwerkstoffen bei Raumtemperatur. Bestimmung der Scherfestigkeit von gekerbten Proben unter Druckbeanspruchung Advanced technical ce...

适用范围：This part of EN 658 specifies the conditions for determination of the interlaminar shear strength of ceramic matrix composite materials with continuous fibre reinforcement at room temperature, by loadi...

实施日期：2003-03-07

EN ISO 4624-2003

Paints and varnishes Pull-off test for adhesion ISO 4624:2002;Supersedes EN 24624:1992

实施日期：2003-05-01

EN 993-2-1995

成形致密耐火材料制品的试验方法.第2部分:实际密度的测定

Methods of test for dense shaped refractory products Part 2:Determination of true density Including amendment A1:2003

实施日期：1995-02-01

NF S74-517/A1-2007

Protective clothing for firefighters - Performance requirements for protective clothing for firefighting.

DIN SPEC 1026-2010

Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen

实施日期：2010-05-01

EN ISO 10545-3-1997

Ceramic Tiles. Part 3:Determination of Water Absorption,Apparent Porosity,Apparent Relative Density and Bulk Density Supersedes EN 99:1991;ISO 10545-3:1995,Including Technical Corrigendum 1:1997

实施日期：1997-07-01