BS EN ISO 9863-1-2005

土工合成织物.特定压力下厚度的测定.单层

Geokunststoffe. Bestimmung der Dicke unter festgelegten Druecken. Einzellagen Geosynthetics-Determination of Thickness at Specified Pressures-Part 1:Single layers Geosynthetiques. Determination de l'ep...

适用范围：This part of EN ISO 9863 specifies a method for the determination of the thickness of geosynthetics at specifiedpressures and defines the pressure at which the nominal thickness is determined.The test ...

实施日期：2005-03-09

IEC/PAS 62326-20-2011

印制电路板 第20部分:高亮度发光二极管用电子线路板

Printed boards. Part 20:Electronic circuit board for high-brightness LEDs

适用范围：This PAS specifies the properties of the electronic circuit board for high-brightness LEDs(hereafter described as “ECB”).

发布日期：2011-01-26  实施日期：2011-01-26

EN 648-2006

与食品接触的纸和纸板.测定荧光增白纸和纸板的色劳度

Paper and board intended to come into contact with foodstuffs Determination of the fastness of fluorescent whitened paper and board

实施日期：2006-09-01

NF L21-414-1996

Aerospace series. Rivets, solid, universal head, in heat resisting nickel base alloy ni-P11, cadmium plated, inch based series.

BS 5395-1-2010

Stairs. Part 1:Code of practice for the design of stairs with straight flights and winders

实施日期：2010-02-28

ASTM A758/A758M-2010

具有经改进冲击韧性的锻制碳素钢对接焊管道配件规格

Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness

实施日期：2010-11-01

BS 5208-1975

小型内燃机用动力输出轴和安装面的尺寸规范

Abtriebswellen und Anbauflansche fuer kleine Verbrennungsmotoren. Abmessungsspezifikation Dimensions of Power Take-Off Driving Shafts and Mounting Faces for Small Internal Combustion Engines Dimensions...

适用范围：Principal dimensions to permit interchangeability of various attachments on small internal combustion engines generally up to 15 kW power output.

实施日期：1975-01-01

SJ/T 10329-1992

印制板返修、修理和修改

Re-work,repair and revision of printed boards

适用范围：本标准规定了印制板返修、修理和修改的内容和方法(与印制板制造方法无关)。 本标准适用于印制板、印制板组装件的某些缺陷的修复。 本标准是否被采用必须由供需双方协商确定。

实施日期：1992-12-01

DL/T 5400-2007

水工建筑物滑动模板施工技术规范

construction technique specifications for hydraulic structure sliding formwork

适用范围：本标准规定了水工建筑物滑动模板施工的技术要求、施工质量控制以及施工安全技术要求。本标准适用于水电水利工程的滑动模板施工。

实施日期：2008-06-01

BS EN 12616-2003

运动场表面 水渗透率的测定

Sportboeden. Pruefverfahren zur Bestimmung der Wasserdurchlaessigkeit Surfaces for sports areas Determination of water infiltration rate Sols sportifs. Determination de la vitesse d'infiltration de l'e...

适用范围：This European Standard specifies three methods for the determination of water infiltration rate. Method A is suitable for synthetic, textile, synthetic turf and bound mineral sports surfaces, Method B ...

实施日期：2003-08-15

EN 596-1995

木结构.木框架墙.软体冲击试验

Timber Structures. Test Methods. Soft Body Impact Test of Timber Framed Walls

实施日期：1995-01-01

DIN EN 3506-2003

航空和航天 耐热合金热轧板 厚度2.0mm≤a≤100mm 尺寸

Aerospace series - Hot rolled sheets and plates in heat resisting alloys - Thickness 2,0 mm <kleiner => <(kursiv)a> <kleiner => 100 mm; dimensions

适用范围：The document specifies the dimensions and tolerances of hot rolled sheets and plates, in heat resisting alloys thickness 2,0 mm <kleiner => a <kleiner => 100 mm, for aerospace applications.#,,#

DIN EN 2467-2008

Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Air melted - Softened - Plate, sheet and strip - 0, 4 mm≤a≤20 mm - 520 MPa≤Rm≤670 MPa

实施日期：2008-10-01

CNS 1353-1986

纸及纸板低破裂强度试验法

Methods of Test for Low Bursting Strength of Paper and Paperboard

实施日期：1986-01-17

NF L14-328-2005

Aerospaces series - Aluminium alloy AL-P7010- - T651 - Plate - 6 mm < a < or = 20 mm.

CNS 10850-2000

印刷电路板通则

General Rules for Printed Wiring Boards

发布日期：1984-04-17  实施日期：2000-10-24

DIN EN 61212-1-2007

Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements (IEC 61212-1:2006)

实施日期：2007-01-01

DIN 68120-1968

木型材; 基本形状

Timber profiles; basic forms

适用范围：Timber profiles, basic forms

GB 2680-1981

平板玻璃可见光总透过率测定方法

Sheet glass-Determination of transmittancy of visible rays

ISO 834-9-2003

耐火试验 建筑构件 第9部分:非承重吊顶构件的特殊要求

Fire-resistance tests -- Elements of building construction -- Part 9: Specific requirements for non-loadbearing ceiling elements

适用范围：ISO 834-9:2002 specifies test procedures for determining the fire resistance of non-loadbearing ceiling elements, which possess fire resistance independent of any building element above them, when expo...

发布日期：2003-02-01  实施日期：2003-02-01