DIN EN 2155-19-1996

航空和航天.飞机玻璃透明材料的试验方法.第19部分:抗裂纹的测定

Aerospace series - Test methods for transparent materials for aircraft glazing - Part 19: Determination of crace resistance; German version EN 2155-19:1996

适用范围：This standard specifies the method for determination of the resistance of transparent plate and sheet material to the effects of an agressive environment, the test specimens being clamped as fulcrum an...

EN 611-1-1995

锡和锡合金.白蜡(锡基合金)

Tin and Tin Alloys. Pewter and Pewterware. Part 1:Pewter

实施日期：1995-01-01

GB 50322-2011

粮食钢板筒仓设计规范

Code for design of grain steel silos

适用范围：本规范适用于平面形状为圆形，中心装、卸料的粮食钢板筒仓的设计。 粮食钢板筒仓的设计使用年限不应少于 25 年。

发布日期：2011-07-26  实施日期：2012-06-01

CNS 6499-1980

云母片、薄片、薄层与裂片之厚度测量法

Mica Blocks, Thins, Films and Splittings - Measurement of Thickness

发布日期：1980-09-30  实施日期：1980-09-30

QB/T 2463.1-1999

硬质聚氯乙烯低发泡板材自由发泡法

实施日期：2000-03-01

DIN 53766-1-1991

玻璃纤维增强塑料制仪器和容器的检验.粘接强度的测定

Testing of glass fibre reinforced plastics apparatus and containers; determination of adhesive strength

适用范围：This standard contains a test method, including the preparation of specimens, for the determination of the adhesive strength between the laminate and liner.

DIN EN 10132-1-2000

热处理用冷轧窄钢带.交货技术条件.第1部分:通则

Cold-rolled narrow steel strip for heat-treatment - Technical delivery conditions - Part 1: General; German version EN 10132-1:2000

适用范围：The document contains technical delivery conditions f?cold-rolled narrow steel strip for heat.

ISO 13609-2014

Wood-based panels -- Plywood -- Blockboards and battenboards

发布日期：2014-02-01  实施日期：2014-02-01

BS EN 60601-2-52-2010

Medizinische elektrische Ger?te. Besondere Festlegungen für die Sicherheit einschlie?lich der wesentlichen Leistungsmerkmale von medizinischen Betten Medical electrical equipment Part 2-52:Particular requirements for basic safety and essential performance of medical beds Appareils électromédicaux. Exigences particulières pour la sécurit de base et les performances essentielles des lits médicaux

实施日期：2010-05-31

DIN EN 12316-2-2013

Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing; German version EN 12316-2:2013

发布日期：2013-08-01  实施日期：2013-08-01

NF C93-780-2-40-2013

Materials for printed boards and other interconnecting structures - Part 2-40 : reinforced base materials clad and unclad - High performance, modified, non-halogenated epoxide woven E-glass laminated sheets of defined flamm

ISO 6507-3-2005

金属材料 维氏硬度试验 第3部分:标准硬度块的标定

Metallic materials -- Vickers hardness test -- Part 3: Calibration of reference blocks

适用范围：ISO 6507-3:2005 specifies a method for the calibration of reference blocks to be used for the indirect verification of Vickers hardness testing machines, as specified in ISO 6507-2. The method is appli...

发布日期：2005-12-01  实施日期：2005-12-01

DIN EN 3474-2006

航空和航天 铝合金AL-P2024-T81 铝板和铝带 0.25 mm ≤ a ≤ 6 mm

Aerospace series - Aluminium alloy AL- P2024-T81 - Sheet and strip - 0.25 mm <= a <= 6 mm

适用范围：This standard specifies the requirements relating to: Aluminium alloy AL-P2024-T81 - Sheet and strip - 0,25 mm <kleiner => a <kleiner => 6 mm for aerospace applications.#,,#

实施日期：2006-06-01

GB/T 20887.4-2010

汽车用高强度热连轧钢板及钢带 第4部分：相变诱导塑性钢

Continuously hot rolled high strength steel sheet and strip for automobile - Part 4: Transformation induced plasticity steel

发布日期：2010-09-02  实施日期：2011-06-01

BS 2L 77-1971

Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)

GB 240-1982

薄板双层咬合弯曲试验方法

Method for bi-layer matching and bend test on sheets of metals

GB/T 6759-2013

输送带 层间粘合强度 试验方法

Conveyor belts - Adhesion between constitutive elements - Test methods

适用范围：本标准规定了测定输送带结构层之间，即各织物层之间、带芯与覆盖层之间的粘合强度的两个试验方法（ A 法和 B 法）。

发布日期：2013-04-28  实施日期：2014-03-01

BS 8000-11-2011

Workmanship on building sites. Part 11:Internal and external wall and floor tiling. Ceramic and agglomerated stone tiles,natural stone and terrazzo tiles and slabs,and mosaics. Code of practice

实施日期：2011-01-31

NF B51-078-3-2008

Wood-based panels - Characteristic values for structural design - Part 3 : Solid-wood panels.

BS 2HR 205-2009

Gegluehtes Band und Blech aus Nickel-Kupfer-Legierung auf Nickelbasis (Cu 31) Specification for nickel-copper alloy sheet and strip:annealed (Nickel base,Cu 31) T?les et feuillards en alliages nickel-cuivre. l'état recuit (base de nickel,Cu 31). Spécifications

实施日期：2009-11-30