DIN EN 2155-19-1996

航空和航天.飞机玻璃透明材料的试验方法.第19部分:抗裂纹的测定

Aerospace series - Test methods for transparent materials for aircraft glazing - Part 19: Determination of crace resistance; German version EN 2155-19:1996

适用范围：This standard specifies the method for determination of the resistance of transparent plate and sheet material to the effects of an agressive environment, the test specimens being clamped as fulcrum an...

NF C93-780-2-40-2013

Materials for printed boards and other interconnecting structures - Part 2-40 : reinforced base materials clad and unclad - High performance, modified, non-halogenated epoxide woven E-glass laminated sheets of defined flamm

ISO 5638-1978

强韧纸板 每层定量的测定

Solid fibreboard -- Determination of grammage of single layers

适用范围：Applies to single layers of glued and laminated solid fibreboard and is applicable to all types of solid fibreboard as defined in ISO 4046, provided that the adhesive dessolves under the conditions spe...

发布日期：1978-10-01  实施日期：1978-10-01

ISO 16985-2003

人造板 由相对湿度变化引起尺寸变化的测定

Wood-based panels -- Determination of dimensional changes associated with changes in relative humidity

适用范围：ISO 16985:2003 specifies a method for the determination of dimensional changes in wood-based panels, due to variations in relative humidity.

发布日期：2003-05-01  实施日期：2003-05-01

ASTM E1680-1995(2003)

空气经金属外屋面板系统泄漏速度的试验方法

Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems

适用范围：<p>1.1 This test method covers the determination of the resistance of exterior metal roof panel systems to air infiltration resulting from either positive or negative air pressure differences. The test...

实施日期：1995-04-15

EN 13574-2001

Inland Navigation Vessels. Permanently Installed Climbing Devices with a Length not Exceeding 5 m

实施日期：2001-07-01

DIN EN 61300-2-49-2008

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-49: Tests - Connector installation test

实施日期：2008-02-01

IEC 60893-3-7-2003

绝缘材料 电工用热固性树脂工业硬质层压板 第3-7部分:单项材料规范 聚酰亚胺树脂基硬质层压板的要求

Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated she...

适用范围：Gives the requirements for industrial rigid laminated sheets for electrical purposes based on polyimide resins and different reinforcements. Applications and distinguishing properties are given. Materi...

发布日期：2003-11-14  实施日期：2003-11-14

ASTM C474-2005

石膏墙板建造用接合处理材料的试验方法

Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction

适用范围：<p>1.1 These test methods cover the physical testing of joint compound, paper joint tape, glass-mesh joint tape, and an assembly of joint compound and paper joint tape.</p><p>1.1.1 Joint treatment mate...

实施日期：2005-01-01

DIN EN ISO 7823-1-2003

塑料 聚甲基丙烯酸甲酯板材 类型、尺寸和特性 第1部分:浇注薄板材

Plastic - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets

适用范围：This Standard specifies requirements for non-modified flat poly(methyl methacrylate) (PMMA) cast sheets (plates) for general-purpose use. The sheets may be colourless or coloured, and may be transparen...

NF C26-183-6/A1-2010

Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6 : Specifications for individual materials - Requirements for rigid laminated sheets based on silicone

DIN 1053-4-2013

Masonry. Part 4:Prefabricated masonry compound units

实施日期：2013-04-01

BS 5502-51-1991

农业用建筑物和构筑物.第51部分:牲畜用有槽、有孔和筛网状地板设计和施工实用规程

Buildings and Structures for Agriculture Part 51:Code of Practice for Design and Construction of Slatted,Perforated and Mesh Floors for Livestock

适用范围：Design and construction of floors of housing for livestock to provide self-cleaning by allowing animal waste to pass through floor voids.

实施日期：1991-06-27

ASTM C1787-2014

直立墙中与基于波特兰水泥灰泥一起使用的非金属灰泥基础的安装规格

Standard Specification for Installation of Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications

适用范围：This specification describes the minimum requirements for the installation of non-metallic plaster bases used with portland cement-based plaster in vertical wall applications. In cases where a fire res...

发布日期：2014-02-01  实施日期：2014-02-01

DIN 24539-2-1985

冶金和轧钢设备.接DIN 261的T型头螺钉的锚板.双锚板;尺寸名称,安装深度

Equipment for steelworks and rolling mills; anchor plates for tee head bolts according to DIN 261; double anchor plates; dimensions, designations, mounting depth

EN 321-2001

人造板.周期试验条件下抗湿性测定

Wood-Based Panels. Determination of Moisture Resistance under Cyclic Test Conditions

实施日期：2001-11-01

DIN EN 2155-8-1989

航空和宇航;飞机装配玻璃用透明材料的试验方法;第8部分:光学畸变的测定

Aerospace series; test methods for transparent materials for aircraft glazing; part 8: determination of optical distortion; german version EN 2155-8:1989

适用范围：This standard specifies the method of measurement of optical distortion of sheets in transparent materials, which consists of determining the change of deviation over the entire area of the sheet.#,,#

BS EN ISO 13856-1-2013

机械安全性 压敏保护装置 压敏垫和压敏地板的设计和试验的一般原则

Safety of machinery. Pressure-sensitive protective devices. General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors

发布日期：2013-04-30  实施日期：2013-04-30

NF Q03-064-1978

硬纸板. 单层克重测定

Solid fibreboard. Determination of grammage of single layers.

实施日期：1978-12-01

IEC 61249-2-39-2012

印制板和其它互连结构用材料 第2-39部分:包层和非包层增强基材 铜包钢无铅装配用规定了燃烧性的高性能环氧和非卤环氧化物编织E玻璃层压板(垂直燃烧法)

Materials for printed boards and other interconnecting structures. Part 2-39:Reinforced base materials clad and unclad. High performance epoxide and non-epoxide,woven E-glass laminate sheets of defined...

实施日期：2012-11-29