NF E74-382-2008

Spanners and wrenches - Spline drive ends for power socket wrenches.

NF F67-261-2000

Railway applications - Mounting of electronic equipment.

DIN EN 61076-4-108-2002

电子设备用连接器 第4-108部分:有质量评定的印制电路板接插件 模数节距25mm、具有IEC 60917-1规定2.5 mm基本网格、可用于15 mm侧向填充密度的集成屏蔽功能的电缆与板连接件的详细规范

Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality; Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shield...

实施日期：2002-12-01

NF Q40-002-5/IN1-2010

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5 : sheeters.

EN 61518-2001

Mating Dimensions between Differential Pressure (Type) Measuring Instruments and Flanged-On Shut-Off Devices Up to 413 Bar (41,3 MPa) IEC 61518:2001; Incorporating corrigendum February 2002

BS 1722-10-2006

栅栏.链条链接和焊接筛网的防止进入的栅栏规范

Zauene. Einbruchsichere Zaeune aus Viereckgeflecht und geschweisstem Drahtgeflecht Fences. Part 10:Specification for anti-intruder fences in chain link and welded mesh Clotures. Specification pour les ...

适用范围：This part of BS 1722 specifies requirements for anti-intruder chain linkor welded mesh fences and gates of at least 2.4 m in height for situationsthat require a higher level of protection than that off...

实施日期：2006-11-30

BS EN 15280-2013

地下管道交流电腐蚀概率的评定 阴极防护管道的应用

Evaluation of a.c. corrosion likelihood of buried pipelines applicable to cathodically protected pipelines

发布日期：2013-09-30  实施日期：2013-09-30

ISO 4510-1-1987

土方机械. 维修工具.第1部分: 一般维修和调整工具

Earth-moving machinery -- Service tools -- Part 1: Common maintenance and adjustment tools

适用范围：Lays down the tool groupings commonly used for carrying out on-site, normal maintenance and routine adjustment work on earth-moving machinery as defined in ISO 6165. Table 1 contains suitable tools, wh...

发布日期：1987-08-31  实施日期：1987-08-31

NF P75-222/A1-2007

Thermal insulating products for building applications - Determination of behaviour under point load.

BS EN 817-2008

卫生用龙头 机械混合阀（PN10）一般技术规范

Sanit?rarmaturen. Mechanisch einstellbare Mischer (PN 10). Allgemeine technische Spezifikation Sanitary tapware. Mechanical mixing valves (PN 10). General technical specifications Robinetterie sanitair...

适用范围：This European Standard specifies: the dimensional, leaktightness, pressure resistance, hydraulic performance, mechanical strength, enduranceand acoustic characteristics with which mechanical mixing va...

实施日期：2008-12-31

NF B35-056-2003

Laboratory furniture - Recommendations for design and installation.

NF C93-273-1-1-2005

Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1-1 : blank detail specification - Current limiting application.

DIN EN ISO 6789-2003

螺钉和螺母用装配工具 手动扭矩工具 设计合格试验,质量合格试验的技术条件和试验方法及检定程序

Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure (ISO 6789:2003)

适用范围：This International Standard specifies the requirements for, and describes the test methods and marking, of hand torque tools used for controlled tightening of bolted connections. It applies to torque t...

DIN 19516-2004

坐便器 要求和试验方法

WC seats - Requirements and test methods

适用范围：The document specifies requirements and test methods for WC seats suitable for use with WC pans according to DIN EN 997.

ISO 10103-2001

螺丝螺母的装配工具 双头型

Assembly tools for screws and nuts -- Double-headed, flat and offset, box wrenches -- Length of wrenches and thickness of the heads

发布日期：2001-04-01  实施日期：2001-04-01

DIN EN 61188-5-2-2004

印刷电路板和印制电路板组件 设计和使用 第5-2部分:安装考虑(连接面/接头) 分立件

Printed boards and printed board assemblies - Design and use - Part 5-2: Attachment (land/joint) considerations - Discrete components

适用范围：This part of IEC 61188 provides information on land pattern geometries used for the surface attachment of discrete electronic components.

实施日期：2004-05-01

BS EN ISO 23125-2010+A1-2012

机床 安全性 车床

Machine tools. Safety. Turning machines

发布日期：2010-08-31  实施日期：2010-08-31

DIN EN 15081-2008

Industrial valves - Mounting kits for part-turn valve actuator attachment

实施日期：2008-03-01

DIN EN 60297-3-104-2007

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-104: Connector dependent interface dimensions of subracks and plug-in units (IEC 60297-3-104:2006); German version EN 60297-3-104:2006

实施日期：2007-03-01

BS 5974-2010

临时安装的悬挂的脚手架和入口设备实用规程

Code of practice for the planning,design,setting up and use of temporary suspended access equipment

适用范围：This code of practice makes recommendations for the selection,design, installation, inspection, use and maintenance of temporarilyinstalled suspended access equipment/systems (TSAE), as defined inBS EN...

实施日期：2010-03-31