DIN EN 61316-2000

工业电缆卷轴

Industrial cable reels (IEC 61316:1999); German version EN 61316:1999

实施日期：2000-09-01

BS EN ISO 5771-2008

Gummischl?uche und-schlauchleitungen für den Transport von wasserfreiem Ammoniak. Anforderungen Rubber hoses and hose assemblies for transferring anhydrous ammonia. Specification Tuyaux et flexibles en caoutchouc pour le transfert d'ammoniac anhydre. Spécifications

实施日期：2008-11-30

NF T47-267-2005

Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification.

DIN EN 1113-2011

Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification; German version EN 1113:2008+A1:2011

EN ISO 6803-1997

Rubber or Plastics Hoses and Hose Assemblies - Hydraulic-Pressure Impulse Test without Flexing ISO 6803: 1994

BS EN 996-1995+A3-2009

Piling equipment. Safety requirements

实施日期：1996-08-15

DIN EN 6049-003-2010

Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 003: Braided, tubular, expandable - Product standard

实施日期：2010-01-01

ISO 4671-2007

橡胶和塑料软管和软管组件 软管尺寸和软管组件长度的测量方法

Rubber and plastics hoses and hose assemblies -- Methods of measurement of the dimensions of hoses and the lengths of hose assemblies

适用范围：ISO 4671:2007 specifies methods of measuring the inside diameter, outside diameter (including diameter over reinforcement of hydraulic hoses), wall thickness, concentricity and lining and cover thickne...

发布日期：2007-12-01  实施日期：2007-12-01

BS EN 854-1997

橡胶管及管配件.纺织增强液压型.规范

Gummischlaeuche und-schlauchleitungen. Hydraulichschlaeuche mit Textileinlage. Spezifikation Rubber Hoses and Hose Assemblies-Textile Reinforced Hydraulic Type-Specification Tuyaux et flexibles en caou...

适用范围：This European Standard specifies requirements for five types of textile reinforced rubber hoses and hose assemblies of nominal bore from 5 to 100. They are suitable for use with: - hydraulic fluids in ...

实施日期：1997-03-15

HB/Z 63.1-2011

航空透明件柔性连接用胶粘剂配制及使用 第1部分： 丙烯酸酯胶粘剂及改性丙烯酸胶粘剂

Preparation and application process of adhesive used in flexible joint of aircraft transparency Part 1:Acrylic adhesive and modified acrylic adhesive

适用范围：本部分规定了丙烯酸醋胶粘剂及改性丙烯酸酷胶粘剂配制及使用的材料、设备、仪器、环境、配制工艺、使用工艺、检验、安全与卫生等。本部分适用于丙烯酸醋胶粘剂及改性丙烯酸醋胶粘剂的配制和使用。

发布日期：2011-07-19  实施日期：2011-10-01

DIN 3021-2-1999

管夹.弹簧带夹.第2部分:交货技术条件

Hose clamps - Spring band clamp - Part 2: Technical delivery conditions

ISO 6805-1994

下采矿用的橡胶软管和软管组件 采煤用钢丝增强井液压型 规范

Rubber hoses and hose assemblies for underground mining -- Wire-reinforced hydraulic types for coal mining -- Specification

适用范围：Cancels and replaces the first edition (1984). Specifies requirements for six types of embedded-wire hose and hose assembly of bore diameter from 5 mm to 51 mm for use with common hydraulic fluids such...

发布日期：1994-10-01  实施日期：1994-10-01

UL 1088-2005

UL Standard for Safety Temporary Lighting Strings Sixth Edition; Reprint with Revisions Through and Including December 02, 2008

发布日期：2005-08-29  实施日期：2005-08-29

IEC 60684-3-406 TO 408-2003

绝缘软管 第3部分:各种型号软管的规范 活页406-408:带有PVC涂层的玻璃纤维编织软管

Flexible insulating sleeving. Part 3:Specifications for individual types of sleeving. Sheets 406 to 408:Glass textile sleeving with PVC coating Gaines isolantes souples. Partie 3:Spécifications pour ty...

适用范围：This standard gives the requirements for E-type glass sleeving using either braided or knitted construction with a continuous flexible coating based on polyvinyl chloride (PVC) or its copolymers or ble...

实施日期：2003-07-01

ISO 9762-2000

航空航天 航空器操纵钢丝绳组件 尺寸及端部配件组合

Aerospace -- Aircraft control wire rope assemblies -- Dimensions and end-fitting combinations

发布日期：2000-12-01  实施日期：2000-12-01

EN ISO 8029-2010

Plastics hose. General-purpose collapsible water hose,textile-reinforced. Specification

实施日期：2010-09-01

ISO 18672-1-2009

常压废水和污水排放用塑料管道系统 聚酯树脂混凝土 第1部分:带有柔性接头的管子和配件

Plastics piping systems for non-pressure drainage and sewerage -- Polyester resin concrete (PRC) -- Part 1: Pipes and fittings with flexible joints

适用范围：ISO 18672-1:2009 specifies definitions, requirements and characteristics of pipes, fittings, joints, materials, test methods and marking for pipes and fittings made from polyester resin concrete (PRC),...

发布日期：2009-06-01  实施日期：2009-06-01

DIN EN 13776-2002

LPG道路槽罐的灌注和释放工序

Filling and discharge procedures for LPG road tankers; German version EN 13776:2002

适用范围：This European Standard specifies filling," discharge and emergency procedures for road tankers used for the transport of liquefied petroleum gas (LPG). This standard also covers routine maintenance pro...

实施日期：2002-09-01

BS EN 29313-1992

点焊设备.冷却管

Specification for resistance spot welding equipment. Cooling tubes

适用范围：Dimensions and tolerances for cooling tubes.

BS 3165-2009

Rubber suction hose and hose assemblies with semi-embedded wire helix for fire-fighting purposes. Requirements and test methods [:BSI BS EN ISO 14557 + A1,BSI BS EN ISO 14557]

实施日期：2009-08-31