GB 3540-1983

柴油机用低压油管接头--球形管接头

实施日期：1984-01-01

ZB/T J94023-1990

柴油机喷油嘴偶件 交货验收技术条件

实施日期：1991-01-01

JT/T 340-1995

船舶柴油机动力装置能量平衡计算方法

Calculating methods for energy balance of marine diesel engine power plant ...

实施日期：1996-06-01

BS EN ISO 8861-1998

造船.柴油机船的发动机室的通风.设计要求和计算依据

Schiffbau. Maschinennraum. Lueftung auf Schiffen mit Dieselmotoren-Antrieb. Grundlagen fuer Entwurf und Auslegung Shipbuilding-Engine-Room Ventilation in Diesel-Engined Ships-Design Requirements and Ba...

适用范围：This International Standard specifies design requirements and suitable calculation methods for the ventilation of the engine room in diesel-engined ships, for normal conditions in all waters. Annex A p...

实施日期：1998-07-15

GB 11122-2006

柴油机油

Diesel engine oils

适用范围：本标准规定了以精制矿物油、合成油或精制矿物油与合成油的混合油为基础，加入多种添加剂或复合剂制成的柴油机油的要求和试验方法、检验规则及标志、包装、运输和贮存。 　　本标准所属产品适用于以柴油为燃料的四冲程柴油发动...

发布日期：2006-07-18  实施日期：2007-01-01

BS ISO 13948-2-2012

Diesel engines. Fuel injection pumps and fuel injector low-pressure connections. Non-threaded (push-on) connections

发布日期：2012-04-30 

CB* 3264-1985

船用柴油机薄壁轴瓦技术条件

适用范围：本标准适用于轴承座孔径为100～500mm的船用柴油机薄壁轴瓦，但不适用于翻边轴瓦。

发布日期：1985-06-16  实施日期：1986-10-20

ISO 13555-2-2003

柴油机 柴油喷射设备动态定时的检验程序

Diesel engines -- Procedure for checking the dynamic timing of diesel fuel injection equipment -- Part 2: Test method

适用范围：ISO 13555-2:2002 specifies a test method for referencing the pressure rise in the high-pressure pipe of a diesel fuel injection system consisting of fuel injection pump, high-pressure pipe or pipes and...

发布日期：2003-05-01  实施日期：2003-05-01

ISO 7440-1-1991

道路车辆 喷油泵试验台 第1部分:校准喷油器总成

Road vehicles -- Fuel injection equipment testing -- Part 1: Calibrating nozzle and holder assemblies

适用范围：This second edition cancels and replaces the first edition (1985), of which 3.2.3 and figures 5 and 6 have been technically revised; clause 5 and table 1 (1985 edition) have been deleted. Annex A is fo...

发布日期：1991-11-01  实施日期：1991-11-01

GB 10082-1988

重型轨道车技术条件

Technical requirements of heavy duty railway motor trolley

ISO 7876-1 AMD 1-1999

Fuel injection equipment - Vocabulary - Part 1: Fuel injection pump AMENDMENT 1 - Second Edition

发布日期：1999-05-01  实施日期：1999-05-01

GB 5264-1985

柴油机喷油泵柱塞偶件技术条件

实施日期：1986-06-30

YS/T 210-1994

柴油机排气净化球型铂催化剂

BS AU 141A-1971

Dieselmotoren fuer Strassenfahrzeuge. Leistungsspezifikation Specification for The performance of diesel engines for road vehicles Performances des moteurs diesel pour vehicules routiers. Specification Information Contained in Standard ISO/TR 14396

实施日期：1971-05-19

DIN 27202-9-2006

铁路车辆的状态 车辆结构和专用设备 第9部分:含对水有危害材料的设备和易燃液的容器和管道

State of railway vehicles - Superstructure and special equipment of vehicles - Part 9: Installations which contain substances dangerous to water as well as tanks and pipe systems for flammable substa...

实施日期：2006-01-01

CNS 2695-1966

陆用小型水冷柴油发动机

Water-cooled Diesel Engines for Land Use (Small Size)

发布日期：1966-12-14  实施日期：1966-12-14

DIN ISO 2698-1995

柴油机.注入喷嘴座.7和28型

Diesel engines - Clamp-mounted fuel injectors, types 7 and 28; identical with ISO 2698:1993

BS ISO 6519-2004

柴油机.喷油泵.轴端和毂盘的锥度

Dieselmotoren. Einspritzpumpen. Kegelige Wellenenden und Naben Diesel engines Fuel injection pumps Tapers for shaft ends and hubs Moteurs diesels. Pompes d'injection de combustible. Cones pour bouts d'...

适用范围：This International Standard specifies the dimensions, necessary for interchangeability, of tapers for the shaft ends and hubs of fuel injection pumps on diesel (compression-ignition) engines. The shaft...

实施日期：2004-12-01

CB/T 3025-1999

船用柴油机网片式油滤器

Oil filters of screen pan for marine diesel engines

NF R16-316-1989

带凸缘和节流阀式试验喷嘴

Road vehicles. Calibrating nozzle, delay pintle type.