BS 949-4-1990

丝锥.第4部分:米制磨牙丝锥规范:制造公差

Gewindebohrer. Geschliffene Gewindebohrer fuer metrische Gewinde:Fertigungstoleranzen Screwing Taps-Part 4:Metric Ground Thread Taps:Manufacturing Tolerances Tarauds. Tarauds. filets rectifies pour fil...

适用范围：Manufacturing tolerances on the threaded portion of taps for producing ISO metric threads of tolerance classes 4H to 8H and 4G to 6G. Valid for short taps specified in ISO/R 529 as well as any other ki...

实施日期：1990-06-28

DIN 929-2000

六角焊接螺母

Hexagon weld nuts

实施日期：2000-01-01

DIN 34801-1999

大凸缘六角头驱动螺栓及螺钉

Bolts and screws with external hexalobular driving feature with large flange

适用范围：The document contains dimensional and technical requirements of bolts and screws with external hexalobular driving feature with large flange and specifies their designation.

DIN ISO 965-2-1999

ISO一般用途米制螺纹.公差.第2部分:一般用途的内螺纹和外螺纹的尺寸极限.中等质量

ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads; medium quality (ISO 965-2:1998)

BS EN ISO 898-5-2012

Mechanical properties of fasteners made of carbon steel and alloy steel. Set screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread

发布日期：2012-06-30  实施日期：2012-06-30

ISO 8488-1986

自行车 自行车前叉上用于装配复合件的螺纹

Cycles -- Screw threads used to assemble head fittings on bicycle forks

适用范围：Specifies details of the screw threads used to assemble heads, i.d. fittings, on bicycle fork steering columns. The basic thread profile is that of ISO 68; the tolerance grades and tolerance positions ...

发布日期：1986-05-31  实施日期：1986-05-31

NF E25-400-1-2012

Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2 : nuts with specified property classes - Coarse thread and fine pitch thread.

BS SP 53-1953

Specification for swaged cable-end assemblies (B.A. and B.S.F. threads) for preformed steel wire rope for aircraft (suitable for use with British Standard W.9 wire rope)

DIN 352-2008

Sets of taps - Sets of 3 taps for metric coarse ISO-threads M1 to M68

实施日期：2008-11-01

BS G 154-1958

Schrauben mit unverlierbarem Unterlegteil fuer Flugzeuge Screw with Captive Washers for Aircraft Vis a rondelles prisonnieres pour aeronefs AMD 346:October 1969;[:BSI BS G 203]

实施日期：1958-12-31

EN ISO 4032-2000

Hexagon Nuts,Style 1. Product Grades A and B ISO 4032:1999;Supersedes EN 24032:1991

实施日期：2000-11-01

BS 2A 29-1962

Specification for aluminium alloy hexagonal nuts (B.A and B.S.F. threads) (ordinary and slotted) for aircraft

NF E25-407-2013

2型六角头螺母.A和B级产品

Hexagon high nuts (style 2) - Product grades A and B.

DIN 376-2008

Machine screwing taps for coarse pitch metric ISO-thread M3 to M68

实施日期：2008-11-01

DIN EN 22857-1990

ISO米制螺纹公差4H至8H和4G至6G粗细牙用螺锥

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; manufacturing tolerances on the threaded portion (ISO 2857:1973 incl. AMD 1:1984 and AMD 2:1986); ...

适用范围：The standard specifies the manufacturing tolerances on the threaded portion of taps for producing the ISO metric threads of tolerances classes 4H to 8H and 4G to 6G, according to ISO 965-1 to 965-3.#,,...

ISO 898-1-2009

碳钢和合金钢制紧固件的机械性能 第1部分:带指定特性的螺栓、螺钉和螺柱 粗牙螺纹和细牙螺纹

Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs with specified property classes -- Coarse thread and fine pitch thread

适用范围：ISO 898-1:2009 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners — th...

发布日期：2009-04-01  实施日期：2009-04-01

DIN 13-20-2000

ISO米制螺纹.公称直径1～68mm的粗牙螺纹的极限尺寸.常用公差带

ISO general purpose metric screw threads - Part 20: Limits of sizes for coarse pitch threads with the prefered tolerance classes; nominal sizes from 1 mm to 68 mm

适用范围：The document applies for ISO metric threads with basic profile according to DIN ISO 68-1.

BS 3777-1964

螺纹量筒规范

Schraubgewindemesszylinder. Spezifikation Screw Thread Measuring Cylinders Cylindres de mesure des filetages de vis. Specification Amd 1;

适用范围：Grade A (pitch-line) and Grade B (grouped) measuring cylinders for checking external screw threads of Unified and ISO inch, Whitworth, B.A. and ISO metric form by means of pitch diameter measuring mach...

实施日期：1964-01-01

DIN 371-2008

Machine taps with reinforced shank for coarse pitch metric ISO-threads M1 to M10 and fine pitch metric ISO-threads M1 * 0,2 to M10 * 1,25

实施日期：2008-11-01

DIN 357-2008

Machine nut taps for coarse pitch metric ISO-threads M3 to M68

实施日期：2008-11-01