EN 14399-10-2009

High-strength structural bolting assemblies for preloading. Part 10:System HRC. Bolt and nut assemblies with calibrated preload

实施日期：2009-03-01

IEC 60034-2-2-2010

旋转电机 第2-2部分:从试验测定大型机器分离损耗的特殊方法 IEC 60034-2-1的补充

Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1

适用范围：IEC 60034-2-2:2010 applies to large rotating electrical machines and establishes additional methods of determining separate losses and to define an efficiency supplementing IEC 60034-2-1. These methods...

发布日期：2010-03-16  实施日期：2010-03-16

NF E25-801-10-2009

High-strength structural bolting assemblies for preloading - Part 10 : system HRC - Bolt and nut assemblies with calibrated preload.

ISO/TS 15530-4-2008

产品几何量技术规范(GPS) 坐标测量器(CMM):确定测量不确定度的技术 第4部分:用模拟评估特定任务测量不确定度

Geometrical Product Specifications (GPS) -- Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement -- Part 4: Evaluating task-specific measurement uncertainty usi...

适用范围：ISO/TS 15530-4:2008 specifies requirements (for the manufacturer and the user) for the application of (simulation-based) uncertainty evaluating software (UES) to measurements made with coordinate measu...

发布日期：2008-06-01  实施日期：2008-06-01

BS EN ISO 13517-2013

金属粉末 用标准漏斗法(Gustavsson流速计)测定流速

Metallic powders. Determination of flowrate by means of a calibratedfunnel (Gustavsson flowmeter)

发布日期：2013-05-31  实施日期：2013-05-31

BS EN 14399-10-2009

Hochfeste planm??ig vorspannbare Schraubenverbindungen für den Metallbau. System HRC. Garnituren aus Schrauben und Muttern mit kalibrierter Vorspannung High-strength structural bolting assemblies for preloading Part 10:System HRC-Bolt and nut assemblies with calibrated preload Boulonnerie de construction métallique. haute résistance apte. la précontrainte. Système HRC. Boulons (vis + écrou + rondelle). précontrainte calibrée

实施日期：2009-07-31

NF C51-112-2-2012

Rotating electrical machines - Part 2-2 : specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1.

EN ISO 13517-2013

金属粉末 标准漏斗法(Gustavsson流速计)测定流速

Metallic powders. Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter)

实施日期：2013-05-01

DIN 762-1-1992

连续输送机用经过校正和检验的链环节距为5d的2级圆钢链索

Calibrated and tested round steel link chains for continuous conveyors; grade 2, pitch 5<(kursiv)d>

适用范围：The document applies to calibrated and tested round steel link chains, grade 2, pitch t = 5d, and specifies their dimensions and mechanical properties.#,,#

实施日期：1992-09-01

BS DD ISO/TS 15530-4-2008

Geometrical Product Specifications (GPS). Coordinate measuring machines (CMM):Technique for determining the uncertainty of measurement Part 4:Evaluating task-specific measurement uncertainty using simulation Spécification géométrique des produits (GPS). Machines. mesurer tridimensionnelles (MMT). Technique pour la détermination de l'incertitude de mesure. ?valuation de l'incertitude de mesure spécifique d'une t?che. l'aide de simulations

实施日期：2008-11-30

DIN EN 60034-2-2-2010

旋转电机 第2-2部分:从试验测定大型机器分离损耗的特殊方法 IEC 60034-2-1的补充

Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1 (IEC 60034-2-2:2010); German version EN 60034-2-2:20...

实施日期：2010-10-01

DIN 762-2-1992

连续输送机用经过校正和检验的链环节距为5d的3级圆钢链索

Calibrated and tested round steel link chains for continuous conveyors; grade 3, pitch 5<(kursiv)d>

实施日期：1992-09-01

ISO 13517-2013

Metallic powders -- Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter)

发布日期：2013-05-01  实施日期：2013-05-01

BS EN 60034-2-2-2010

Drehende elektrische Maschinen. Besondere Verfahren zur Bestimmung der Einzelverluste gro?er elektrischer Maschinen aus Prüfungen. Erg?nzung zu IEC 60034-2-1 Rotating electrical machines Part 2-2:Specific methods for determining separate losses of large machines from tests. Supplement to IEC 60034-2-1 Machines électrique tournantes. Méthodes spécifiques pour déterminer les pertes séparées des machines de grande taille. partir d'essais. Complément. la CEI 60034-2-1

实施日期：2010-07-31

DIN EN 14399-10-2009

High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload

实施日期：2009-07-01

DIN EN ISO 13517-2013

金属粉末 用标准漏斗法（Gustavsson流速计）测定流速

Metallic powders - Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2013); German version EN ISO 13517:2013

发布日期：2013-08-01  实施日期：2013-08-01

DIN 32895-1992

运输车辆用圆钢链

Round steel link chains for car loaders and manure spreaders, calibrated, tested

适用范围：The document specifies dimensions and mechanical properties of tested and calibrated round steel link chains in the range from 8 to 13 mm nominal diameter.