DIN EN 2267-008-2006

航空和航天 普通电线 工作温度-55℃ - 260℃ 第008部分:DM系列,紫外线激光可印字的单芯和多芯线 产品标准

Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 鳦 and 260 鳦 - Part 008: DM family, single UV laser printable and muticore assembly - Product standard

适用范围：This Standard specifies the characteristics of UV laser printable electrical lightweight cables DM family for use in the on-board electrical systems of aircraft at operating temperatures between -55 ?a...

实施日期：2006-05-01

DIN 8326-1-1988

石英小表;要求,检验,标记

Quartz wrist watches; requirements, testing, marking

适用范围：This standard refers to watches and movements of watches with a quartz resonator.

NF E64-608-4-2010

Safety of woodworking machines - Tenoning machines - Part 4 : edge banding machines fed by chain(s).

DIN EN 10083-3-2007

Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels

实施日期：2009-01-01

NF J80-010-2003

内河航行 词汇

Inland navigation vessels - Vocabulary.

EN 767-1994

救援食品运输袋.黄麻/聚烯烃混织袋

Sacks for the Transport of Food Aid. Sacks Made of Woven Jute/Polyolefin Fabric

实施日期：1994-01-01

EN 611-1-1995

锡和锡合金.白蜡(锡基合金)

Tin and Tin Alloys. Pewter and Pewterware. Part 1:Pewter

实施日期：1995-01-01

NF C32-041-2005

Non electrical test methods for low voltage energy cables.

NF E25-801-2-2005

High-strength structural bolting assemblies for preloading - Part 2 : suitability test for preloading.

NF S54-005-1-2013

Child use and care articles - Changing units for domestic use - Part 1 : safety requirements

NF C93-112-19-2006

Fixed capacitors for use in electronic equipment - Part 19 : sectional specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors.

DIN EN 3660-063-2010

Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 063: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self locking for EN 3645 - Product standard; German and English version EN 3660-063:2009

实施日期：2010-10-01

DIN EN ISO 2320-2009

有效力矩型钢螺母 机械和工作性能

Prevailing torque type steel nuts - Mechanical and performance properties

适用范围：This International Standard specifies the mechanical and performance properties for prevailing torque typesteel nuts when tested at an ambient temperature range of +10 ~C to +35 ~C. It includes a singl...

实施日期：2009-03-01

DIN 81312-2012

Rim-locks without latch bolt for heavy hinged doors on ships

实施日期：2012-08-01

BS EN ISO 20127-2005

Zahnheilkunde. Physikalische Eigenschaften von elektrischen Zahnbuersten Dentistry Powered toothbrushes General requirements and test methods Art dentaire. Brosses a dents electriques. Exigences generales et methodes d'essai

实施日期：2005-11-02

DIN EN ISO 4628-5-2004

色漆和清漆 漆膜降解的评定 一般性缺陷程度,量值和大小及均匀变化程度的规定 第５部分:剥落等级的评定

Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking ...

适用范围：This part of ISO 4628 specifies a method for assessing the degree of flaking of coatings by comparison with pictorial standards and using the designation system defined in ISO 4628-1.

NF C53-213-1993

Semiconducteur convectors general requirements and line commutated convertors. Part 1-3 : transformers and reactors.

DIN EN 61316-2000

工业电缆卷轴

Industrial cable reels (IEC 61316:1999); German version EN 61316:1999

实施日期：2000-09-01

BS EN 3379-1996

镀银耐热镍基合金NI-P101HT(沃斯帕洛尹合金)制中长螺纹紧公差柄双六角头增高螺栓.等级:1210 MPa(室温)/730℃

Zwoelfkant-Passschrauben,mittlere Gewindelaenge,aus hochwarmfester Nickelbasislegierung NI-P101HT (Waspaloy),fuer hohe Muttern. Klasse:1210 MPa (bei Raumtemperatur)/730°C Bolts,Double Hexagon Head,Clos...

适用范围：This standard specifies the characteristics of double hexagon headed bolts with close tolerance shank and medium length thread, in NI-P101HT, for increased height nuts, for aerospace applications. Clas...

实施日期：1996-01-01

NF A36-231-2-2013

Hote-rolled flat products made of high yield strength steels for cold forming - Part 2 : technical delivery conditions for thermomechanically rolled steels