SJ/T 31035-1994

弯曲校正机完好要求和检查评定方法

适用范围：本标准规定了弯曲校正机的完好要求和检查、评定方法。 本标准适用于板料弯曲机、三辊卷板机、弯管机、型材弯曲机、板料校平机、型材校直机、板料折弯机、轧平机等弯曲校正机械。其他型式弯曲校正机亦可参照执行。

发布日期：1906-06-08  实施日期：1906-06-08

NF C93-537-3-1-2001

Communication cables - Specifications for test methods - Part 3-1 : mechanical test methods - General requirements.

BS 5766-21-2001

动物饲料分析方法 第21部分:钠钾含量的测定 使用燃烧发射光谱法

Futtermittel. Bestimmung des Kalium-und Natriumgehalts. Flammenemissionsspektralphotometrisches Verfahren Methods for Analysis of Animal Feeding Stuffs-Part 21:Determination of Potassium and Sodium Con...

适用范围：This International Standard specifies a calibration method and a standard addition method for the determination of potassium and sodium contents of animal feeding stuffs by flame-emission spectrometry....

实施日期：2001-05-15

NF X06-048-4-2004

Capability of detection - Part 4 : methodology for comparing the minimum detectable value with a given value.

ISO 389-3-1994

声学 校准测听设备的基准零级 第3部分:骨振器纯音基准等效阈力级

Acoustics -- Reference zero for the calibration of audiometric equipment -- Part 3: Reference equivalent threshold force levels for pure tones and bone vibrators

适用范围：Specifies the following data applicable to the calibration of bone vibrators for pure-tone bone-conduction audiometry: reference equivalent threshold force levels (RETFL), corresponding to the threshol...

发布日期：1994-09-01  实施日期：1994-09-01

BS ISO 1100-2-1998

明渠液体流量测量.第2部分:水位流量关系测定

Durchfluss(mengen)messung in offenen Gerinnen. Bestimmung des Verhaeltnisses zwischen (Fluessigkeits)Stand und Ablauf(menge) Measurement of Liquid Flow in Open Channels-Part 2:Determination of the Stag...

适用范围：Specifies methods of determining the stage-discharge relation for a gauging station in both stable and unstable channels, including those subject to ice conditions. Includes an analysis of the uncertai...

实施日期：1998-07-15

NF C57-326-1996

Photovoltaic devices. Part 6 : requirements for reference solar modules.

BS 5072-6-1980

工业用氟化钠的试验方法.第6部分:二氧化硅含量的测定

Pruefmethoden fuer Fluornatrium fuer industrielle Anwendung. Bestimmung des Siliziumgehaltes Methods of Test for Sodium Fluoride for Industrial Use Part 6:Determination of Silica Content Methodes d'ess...

适用范围：This International Standard specifies a spectrophotometric method, using the reduced molybdosilicate, for deter-mining the silica content of sodium fluoride primarily used for the production of alumini...

实施日期：1980-01-01

DIN 50055-1989

烟雾弥散性试验用的光测量系统

Light measuring system for testing smoke development

适用范围：This standard describes a system for testing smoke development.

IEEE N323D-2002

安装辐射防护仪

Installed radiation protection instrumentation

实施日期：2002-09-03

BS EN ISO 5436-2-2001

几何产品规范(GPS) 表面结构:轮廓方法 测量标准 第2部分:软件测量标准 校正13802:2002年3月19日

Geometrical product specifications (GPS). Surface texture. Profile method. Measurement standards. Software measurement standards

适用范围：Geometric surfaces, Surface texture, Profile measurement, Profile, Computer software, Calibration, Verification

实施日期：2002-03-12

BS 6955-16-1994

振动和冲击传感器的校正.安装扭矩灵敏度的试验方法

Verfahren zur Kalibrierung von Schwingungs und Stoss-Aufnehmern. Ermitteln des Einflusses des Anzugdrehmoments Calibration of Vibration and Shock Pick-Ups Part 16:Method of Test for Mounting Torque Sen...

适用范围：ISO 5347 comprises a series of documents dealing with methods for the calibration of vibration and shock pick-ups. This part of ISO 5347 lays down detailed specifi-cations for the instrumentation and p...

实施日期：1994-01-01

BS EN 62008-2005

Performance characteristics and caliberation for digital data acquisition systems and relevant software

实施日期：2006-01-24

NF T90-155-1997

Water quality - Determination of benzene and some derivatives - Part 1 : head-space gas chromatographic method.

ISO/IEC 17025-2005

检测和校准实验室的能力的通用要求

General requirements for the competence of testing and calibration laboratories

适用范围：ISO/IEC 17025:2005 specifies the general requirements for the competence to carry out tests and/or calibrations, including sampling. It covers testing and calibration performed using standard methods, ...

发布日期：2005-05-01  实施日期：2005-05-01

NF C91-016-1-5-2005

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5 : radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30 MHz to 1 000 MHz.

BS 6783-8-1986

镍、镍铁和镍合金的取样与分析.第8部分:感应电炉燃烧后用碘滴定法测定镍、镍铁和镍合金中硫的方法

Sampling and Analysis of Nickel,Ferronickel and Nickel Alloys Part 8:Method for Determination of Sulphur in Nickel,Ferronickel and Nickel Alloys by Iodimetric After Induction Furnace Combustion

适用范围：For a sulphur content of nickel and ferronickel in the range 0.001% to 0.3% (m/m) and of nickel alloys in the range 0.002% to 0.1% (m/m).

实施日期：1986-01-01

BS 3900-B12-1986

涂料的试验方法.第B集:液体涂料与干涂料膜的试验(包括化学检验).第12部分:可溶性汞含量的测定

Verfahren zur Pruefung von Anstrichstoffen. Bestimmung des'loeslichen' Quecksilbergehalts Methods of Test for Paints Group B:Tests Involving Chemical Examination of Liquid Paints and Dried Paint Films ...

适用范围：Atomic absorption spectrometric method; range 0.5 to 5% (m/m); extracts prepared as described in Part B5.

实施日期：1986-01-01

EN 13182-2002

Ventilation for buildings. Instrumentation requirements for air velocity measurements in ventilated spaces

实施日期：2002-04-01

DIN EN 29104-1993

封闭导管内的流量测量

Measurement of fluid flow in closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991); German version EN 29104:1993

适用范围：This document recommends methods of test for the evaluation of the performance of electromagnetic flow-meters for liquids flowing in closed conduits. It specifies a uniform procedure to verify the perf...