BS 2HR 51-2010

Specification for high expansion heat-resisting steel billets,bars,forgings and parts (Ni 25.5,Cr 15,Ti 2,Mn 1.5,Mo 1.25,Si 0.7,V 0.3) (Solution treated at 980 Degree C)

实施日期：2010-01-31

DIN EN 755-5-2008

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form

实施日期：2008-06-01

GB/T 26311-2010

再生铜及铜合金棒

Rods and bars of recycling copper and copper alloys

适用范围：本标准规定了再生铜及铜合金棒的产品分类、要求、试验方法、检验规则和包装、标志、运输、贮存和质量证明书、合同（或订货单）等内容。本标准适用于五金用的圆形、方形、六角形及其他异形再生铜及铜合金连铸、挤压、轧制、拉制棒材。

发布日期：2011-01-14  实施日期：2011-11-01

DIN 488-3-2009

Reinforcing steels - Reinforcing steel in coils, steel wire

实施日期：2009-08-01

BS 2L 77-1971

Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)

DIN EN 10087-1999

自由切削钢.半成品和热轧杆棒的交货技术条件

Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods; German version EN 10087:1998

ASTM A453/A453M-2010

具有与奥氏体不锈钢相同膨胀系数的高温螺栓材料的规格

Standard Specification for High-Temperature Bolting,with Expansion Coefficients Comparable to Austenitic Stainless Steels

适用范围：<p id="s00002">1.1 This specification covers five grades of bolting with twelve classes of yield strength ranging from 50 to 120 ksi [345 to 827 MPa] for use in high-temperature service such as fast...

实施日期：2010-04-01

BS 1726-1-2010

螺旋弹簧.第1部分:压缩螺旋弹簧设计指南

Cylindrical helical springs made from round wire and bar. Guide to methods of specifying and tolerancing hot coiled springs,and cold coiled springs not covered by BS EN 15800,and general spring testing...

适用范围：This part of BS 1726 provides guidance on methods of specifying andtolerancing hot coiled compression springs, and cold coiled springs thatfall outside the size range limits specified in BS EN 15800. I...

实施日期：2010-11-30

IEC 61212-3-3-2006

绝缘材料 电工用热固性树脂工业硬质圆形层压管和棒 第3部分:单项材料规范 活页3:圆形层压模制棒

Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 3:Specifications for individual materials. Sheet 3:Round laminated moul...

适用范围：This part of IEC 61212-3 gives requirements for industrial rigid round laminated moulded rodsfor electrical purposes, based on different resins and different reinforcements.Applications and distinguish...

实施日期：2006-08-01

GB 6628-1986

人造石英晶体棒材

Lumbered synthetic quartz crystal

YS/T 589-2006

煤矿支柱用铝合金棒材

Aluminum alloy rods for colliery pillar

发布日期：2006-05-25  实施日期：2006-12-01

GB/T 14999.1-2012

高温合金试验方法 第1部分：纵向低倍组织及缺陷酸浸检验

Test method for superalloys - Part 1: Verification of longitudinal macro-structures and defect by etch

适用范围：本部分规定了高温合金纵向低倍组织常见缺陷和不均匀组织的类型及特征、试样的截取与制备、检验与评定、结果表示方法、检验报告等。 本部分适用于高温合金铸锭、熔检料、锻（轧）坯或件的纵向低倍组织及缺陷的检验。其他产品可参...

发布日期：2012-11-05  实施日期：2013-05-01

BS 4486-1980

混凝土预加应力用热轧和热轧并处理的高抗拉强度的合金钢筋规范

Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete

适用范围：Requirements for preferred sizes for smooth or ribbed alloy steel bars in straight lengths supplied in either hot rolled or hot rolled and processed conditions. Two nominal strength levels, 835 N/mm<UP...

NF A35-564-3-2002

Steel rod, bars and wire for cold heading and cold extrusion - Part 3 : technical delivery conditions for case hardening steels.

NF A50-610-2-2008

Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2 : mechanical properties.

GB/T 26492.5-2011

变形铝及铝合金铸锭及加工产品缺陷 第5部分：管材、棒材、型材、线材缺陷

Defects of wrought aluminium and aluminium alloys ingots and products - Part 5: Defects for tubes,rods or bars,profiles,wires

适用范围：本部分规定了铝及铝合金管材、棒材、型材、线材产品中常见缺陷的定义、特征，并分析了其主要产生原因。本部分适用于铝及铝合金管材、棒材、型材、线材缺陷的分析与判定。

发布日期：2011-05-22  实施日期：2012-02-01

GB 5605-1988

醋酸纤维滤棒

实施日期：1989-06-30

ISO 6362-2-2012

加工铝和铝合金 挤压棒/条材、管材和型材 第2部分:力学性能

Wrought aluminium and aluminium alloys -- Extruded rods/bars, tubes and profiles -- Part 2: Mechanical properties

发布日期：2012-07-01  实施日期：2012-07-01

NF E29-300-4-2008

Industrial valves - Shell design strength - Part 4 : calculation method for valve shells manufactures in metallic materials other than steel.

DIN EN 10221-1996

热轧棒材的表面质量等级.交货技术条件

Surface quality classes for hot-rolled round bars and rods - Technical delivery conditions; German version EN 10221:1995

适用范围：The document specifies the requirements for the surface quality of hot rolled round bars and wire rod with nominal diameters of 5 mm <kleiner => d<(Index)N> <kleiner => 120 mm.