EN ISO 7792-2-2012

Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012)

EN ISO 2580-1-2002

Plastics. Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials. Part 1:Designation system and basis for specifications ISO 2580-1:2002

实施日期：2002-10-01

BS EN ISO 1452-1-2009

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U). General

实施日期：2010-01-31

NF T53-037-2-2004

Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2 : preparation of test specimens and determinati

BS EN 14598-3-2005

增强热固性模塑化合物.模压塑料板材(SMC)和模塑料块(BMC)的规范.特殊要求

Verstaerkte haertbare Formmassen. Spezifikation fuer Harzmatten (SMC) und faserverstaerkte Pressmassen (BMC). Spezifische Anforderungen Reinforced thermosetting moulding compounds Specification for She...

适用范围：This part of EN 14598 specifies the requirements for physical and chemical properties of Sheet moulding Compounds (SMC) and Bulk Moulding Compound (BMC) and compression or injection moulded specimens. ...

实施日期：2005-05-25

DIN EN 62011-2-2004

绝缘材料 电气用工业刚性模制矩形和六边形横截面的热硬性树脂基薄壁管材和棒材 第2部分: 测试方法

Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Part 2: Methods of test

实施日期：2004-12-01

NF C93-354-2006

Calculation of the effective parameters of magnetic piece parts.

GB/T 12555.12-1990

塑料注射模大型模架 推板导套

Injection mould for plastic large-size mould bases--Guide bushes with head

实施日期：1991-10-01

GB/T 12556.1-1990

塑料注射模 中小型模架

Injection mould for plastic--Medium size and small size mould bases

实施日期：1991-10-01

NF S94-060-1-2007

Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1 : powder form.

ISO 1872-1-1993

塑料 聚乙烯(PE)模塑和挤塑材料 第1部分:命名体系和基本规范

Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 1: Designation system and basis for specifications

适用范围：The types of polyethylene plastics are differentiated from each other by a classification system based on appropriate levels of the designatory properties density and melt flow rate and on information ...

发布日期：1993-12-01  实施日期：1993-12-01

DIN EN 10301-2004

海岸和海上管道用钢管和异型件 输送非腐蚀性气体摩擦的内涂层

Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas

适用范围：This standard defines the application of liquid applied internal coating, epoxy and epoxy-modified resins, for the reduction of friction of tubes and pipeline fittings for conveyance of non corrosive g...

IEC 60205-2006

磁性零件有效参数的计算

Calculation of the effective parameters of magnetic piece parts Calcul des paramètres effectifs des pièces magnétiques Edition 3.0

适用范围：This International Standard lays down uniform rules for the calculation of the effective parameters of closed circuits of ferromagnetic material.

发布日期：2006-04-26  实施日期：2006-04-01

JIS B5105-2000

模具用导套

Guide bushes for moulds

适用范围：この規格は，主にダィカスト金型，プラスチック用金型などのモールド金型に用いられるガイドブシュについて規定する。

BS 3241-1960

薄板挤压用韧化聚苯乙烯规范

Hochschlagfestes Polystyrol fuer die Folienextrusion. Spezifikation Toughened Polystyrene for Sheet Extrusion Polystyrene durci pour extrusion de feuilles. Specification AMD 4132;April 1961

适用范围：Specifies requirements for toughened polystyrene in the form of granules and gives methods of test for impact and tensile strength, moisture content and colour stability to heat.

实施日期：1960-04-08

DIN 16946-1-1989

热固性树脂模塑材料; 注模树脂模塑材料; 检验方法

Cured casting resins; testing

适用范围：Valid for testing of test specimens out of casting resin moulding materials.

NF T53-051-2-2007

Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.

ISO 17771-2003

塑料 热固模塑料 SMC纤维润湿度的测定

Plastics -- Thermoset moulding compounds -- Determination of the degree of fibre wetting in SMC

适用范围：ISO 17771:2002 specifies a method for determining the degree of wetting of the reinforcement in a sheet moulding compound (SMC). It is applicable to quality control by the user of the SMC, as well as t...

发布日期：2003-07-01  实施日期：2003-07-01

QJ 2534.4-1993

小型组合弯曲模元件 B型凸模压块

发布日期：1993-03-29  实施日期：1993-11-01

NF T25-301-2006

Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites.