EN ISO 1833-2-2010

Textiles. Quantitative chemical analysis. Part 2:Ternary fibre mixtures

实施日期：2010-10-01

EN ISO 2898-2-2008

Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials. Part 2:Preparation of test specimens and determination of properties

实施日期：2008-11-01

NF T51-037-2-2005

Plastics - Methods for determining the density of non-cellular plastics - Part 2 : density gradient column method.

NF T54-075-1997

塑料管道和输送系统--聚烯管和配件--氧化感应时间的测定

Plastics piping and ducting systems. Polyolefin pipes and fittings. Determination of oxidation induction time.

NF T51-604-1-2000

Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 1 : designation system and basis for specifications.

NF T57-110-1994

Reinforced plastics based on unsaturated polyester resins. Determination of residual styrene monomer content.

BS EN ISO 14910-1-2013

塑料 模塑和挤塑用热塑聚酯/酯和聚醚/酯弹性体 命名系统和基本规范

Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Designation system and basis for specification

发布日期：2013-04-30  实施日期：2013-04-30

DIN EN ISO 14529-3-2000

塑料.三聚氰胺/石炭酸粉筑模成分.第3部分:选择性筑模成分的要求

Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14529-3:1999); German version EN ISO 14529-3:1999

DIN EN 13900-2-2003

颜料和填料 塑料中弥散方法和弥形性能的评定 第2部分:用轧辊测定含增塑剂聚氯乙烯成型材料的色度和弥散硬度

Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinylchloride b...

DIN EN ISO 11248-1999

塑料.热塑模塑材料.在规定温度下短期性能的评定

Plastics - Thermosetting moulding materials - Evaluation of short-term performance at elevated temperatures (ISO 11248:1993); German version EN ISO 11248:1999

DIN EN ISO 2898-2-2009

塑料 塑化聚氯乙烯(PVC-P)模塑和挤塑材料 第2部分:试样的制备和性能的测定

Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

实施日期：2009-03-01

BS EN 60455-3-4-2003

电气绝缘用无溶剂可聚合树脂复合物规范 第3部分:单项材料规范 第4分册:加填料的聚氨酯复合物 替代BS 5664-3.4:1995

Reaktionsharzmassen fuer die Elektroisolierung. Anforderungen an einzelne Werkstoffe. Gefuellte Polyurethanharzmassen Resin based reactive compounds used for electrical insulation Part 3:Specifications...

实施日期：2003-07-31

NF C26-163-1-2003

电气绝缘用无溶剂可聚合树脂化合物规范 第3部分:专用材料的规范 第1篇:无填料环氧树脂化合物

Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 1 : unfilled epoxy resinous compounds.

ISO 18872-2007

塑料 在高应变率状态下拉伸性能的测定

Plastics -- Determination of tensile properties at high strain rates

发布日期：2007-02-01  实施日期：2007-02-01

DIN 16780-1-1988

模塑料;聚合物热塑性模塑料;分类和标记

Plastic moulding materials; thermoplastic moulding materials of polymeric blends; classification and designation

EN ISO 1872-2-2007

Plastics. Polyethylene (PE) moulding and extrusion materials. Part 2:Preparation of test specimens and determination of properties

实施日期：2007-02-01

ISO 28078-1-2009

塑料 聚苯硫醚(PPS)模塑和挤塑材料 第1部分:命名系统及基本规范

Plastics -- Poly(phenylene sulfide) (PPS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications

发布日期：2009-10-01  实施日期：2009-10-01

EN 1453-1-2000

Plastics Piping Systems with Structured-Wall Pipes for Soil and Waste Discharge (Low and High Temperature) Inside Buildings. Unplasticized Poly(Vinyl Chloride) (PVC-U). Part 1:Specifications for Pipes and the System

实施日期：2000-01-01

DIN EN ISO 14910-1-2006

塑料 热塑聚酯/酯和聚醚/酯模塑和挤塑弹性体 第1部分:命名系统和基本规范

lastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specifications

实施日期：2006-06-01

DIN EN ISO 1163-2-1999

塑料.未增塑聚氯乙烯(PVC-U)模塑与挤出材料.第2部分:试样制备与性能测定

Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1163-2:1995); German version EN ISO 1...