EN 13648-2-2002

Cryogenic Vessels. Safety Devices for Protection Against Excessive Pressure. Part 2:Bursting Disc Safety Devices for Cryogenic Service

实施日期：2002-05-01

BS 4991-1974

丙烯共聚物承压管规范

Propylencopolymer-Druckrohr. Spezifikation Specification for Propylene Copolymer Pressure Pipe Conduite forcee en propylene copolymere. Specification AMD 2262:April 29,1977;AMD 5337:July 31,1987

适用范围：Series 1 for potable water, foodstuffs and pharmaceuticals and Series 2 for chemicals (including water up to 100<deg>C); materials, dimensions, pressure ratings, physical characteristics and test metho...

实施日期：1974-03-29

NF E86-512-1-2009

Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1 : safety valves for cryogenic service.

BS 5045-7-2000

可运输的气体容器.特殊便携式应用的水容量为0.5-15升的无缝钢气体容器的规范

Transportable gas containers. Specification for seamless steel gas containers of water capacity 0.5 L up to 15 L for special portable applications

适用范围：This part of BS 5045 specifies the requirements for the materials, design, construction and testing of seamless steel containers of water capacity greater than 0.5 litre up to 15 litres for the conveya...

BS ISO 4548-5-2013

内燃机全流式机油滤清器试验方法 冷起动模拟和液压脉冲耐久性试验

Methods of test for full-flow lubricating oil filters for internal combustion enginesTest for cold start simulation and hydraulic pulse durability

发布日期：2013-08-31  实施日期：2013-08-31

BS L 118-1975

Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2)

EN ISO 6803-1997

Rubber or Plastics Hoses and Hose Assemblies - Hydraulic-Pressure Impulse Test without Flexing ISO 6803: 1994

EN ISO 4126-2-2003

Safety devices for protection against excessive pressure. Part 2:Bursting disc safety devices Incorporating corrigendam September 2004 and July 2006

实施日期：2003-01-01

BS EN 26948-1991

自动汽水分离器生产和性能试验规范

Kondensatableiter. Fertigungspruefung und Pruefung der Funktionsmerkmale Production and Performance Characteristic Tests for Automatic Steam Traps (ISO 6948:1981) Purgeurs automatiques de vapeur d'eau....

适用范围：This International Standard specifies tests applicable to automatic steam traps. These tests, which are hereafter referred to as production tests and performance characteristic tests, may be conducted ...

实施日期：1991-01-01

BS EN 14336-2004

Heating systems in buildings. Installation and commissioning of water based heating systems

实施日期：2008-08-22

DIN EN ISO 6803-2010

橡胶或塑料软管和软管组件 无挠曲液压脉冲试验

Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing

适用范围：This International Standard describes two categories of hose impulse testing without flexing for rubber or plastic hose assemblies. Category 1 is high pressure testing for test pressures greater than 3...

实施日期：2010-01-01

BS 1212-1-1990

浮子阀.第1部分:活塞型浮子阀(铜合金阀体)(不含浮子)规范

Float operated valves. Specification for piston type float operated valves (copper alloy body) (excluding floats)

适用范围：Specifies materials, workmanship, dimensions and performance requirements for piston type valves of nominal size 3/8, 1/2, 3/4,1, 11/4, 11/2 and 2, intended for use with floats complying with the requi...

DIN EN 12390-8-2009

Testing hardened concrete - Part 8: Depth of penetration of water under pressure

实施日期：2009-07-01

BS EN ISO 4126-5-2004

过压保护安全设备.可控安全减压系统(CSPRS)

Sicherheitseinrichtungen gegen unzul?ssigen ?berdruck. Gesteuerte Sicherheitsventile (CSPRS) Safety devices for protection against excessive pressure. Part 5:Controlled safety pressure relief systems (...

适用范围：This part of this Standard specifies the requirements for Controlled Safety Pressure Relief Systems irrespective of the fluid for which they are designed. It is applicable for main valves having a flow...

实施日期：2004-04-07

BS 6118-1981

重复使用的啤酒和苹果酒玻璃酒瓶规范

Multi-Trip Glass Bottles for Beer and Cider Amd 3;

适用范围：Specifies design, dimensions and performance requirements for 275 ml, 500 ml and 1.13 litre capacity bottles.

实施日期：1981-09-30

ISO 15853-1999

热塑料材料--为测定注塑用材料的静液压强度的管状式样的准备

Thermoplastics materials -- Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding

发布日期：1999-11-01  实施日期：1999-11-01

BS 3424-26-1990

涂层织物试验方法.第26部分:方法29A、29B 及29C和29D:抗透水性和表面润湿性的测定方法

Testing coated fabrics. Methods 29A, 29B, 29C and 29D. Methods for determination of resistance to water penetration and surface wetting

适用范围：Three methods for the determination of the resistance of coated fabrics to water under pressure. Recommends a method for the assessment of the propensity to exhibit 'surface wetness'.

NF E86-700-5-2012

Metallic industrial piping - Part 5 : inspection and testing

BS 5114-1975

聚乙烯管用连结件和压制配件的性能要求规范

Leistungsanforderungen an Verbindungen und Kompressionsfittings fuer Polyethylenrohre. Spezifikation Specification for Performance requirements for joints and compression fittings for use with polyethy...

适用范围：Resistance to hydrostatic pressure, external pressure and pull-out of assembled joints and effect on water and opacity.

实施日期：1975-05-30

BS EN 1432-1997

交换体.交换箱.规格,要求,试验方法,操作条件

Wechselbehaelter. Wechseltanks. Masse,Anforderungen,Pruefverfahren,Betriebsbedingungen Swap Bodies-Swap Tanks-Dimensions,Requirements,Test Methods,Operation Conditions Caisses mobiles. Caisses mobiles ...

适用范围：This Standard specifies the main dimensional and design characteristics, ratings, test methods, and operational requirements of swap tanks to be used within domestic and international multimodal traffi...

实施日期：1997-12-15