DIN EN 14367-2005

不同压力区的不可控防回流器 C类A型

Backflow preventer with different non controllable pressures zones - Family C; Type A

实施日期：2005-10-01

BS ISO 13267-2010

Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte Abwasserkan?le und-leitungen. B?den von Kontroll-und Einsteigsch?chten aus Thermoplasten. Prüfverfahren für die Widerstandsf?higkeit gegen Einbeulen Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics inspection chamber and manhole bases. Test methods for buckling resistance Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pressio

实施日期：2010-06-30

JB/T 9179.3-1999

水压机上自由锻件机械加工余量与公差 台阶轴类

Machining allowances and tolerances of open die forgings on hydraulie press--Stepped shaft

实施日期：2000-01-01

BS 7791-1995

农业拖拉机.液压器具

Landwirtschaftliche Traktoren. Hydraulische Druecke fuer Geraete Agricultural Tractors-Hydraulic Pressure for Implements (ISO 10448:1994) (E) Tracteurs agricoles. Pression hydraulique pour les instrume...

实施日期：1995-01-01

GB/T 5351-1985

纤维增强热固性塑料管短时水压失效压力试验方法

发布日期：1985-09-03  实施日期：1986-05-01

JB/T 9178.2-1999

水压机上自由锻件 复杂程度分类及折合系数

Classification of complexity and equivalent cofficient of open die forgings on hydraulic press

实施日期：2000-01-01

NF S61-913-2007

Portable fire extinguishers - Part 9 : Additional requirements to EN 3-7 for pressure resistance of CO2 extinguishers.

NF U14-405-1997

Agricultural tractors. Hydraulic pressure for implements.

HG/T 4089-2009

塑料衬里设备 水压试验方法

Hydrostatic pressure test method for equipments lined with plastics

发布日期：2009-02-05  实施日期：2009-07-01

JB/T 9179.6-1999

水压机上自由锻件机械加工余量与公差 模块类

Machining allowances and tolerances of open die forgings on hydraulie press--Die block

实施日期：2000-01-01

JB/T 9629-1999

汽轮机承压件 水压试验技术条件

Hydrostatic tests for steam turbine pressure parts

实施日期：2000-01-01

EN ISO 13846-2000

Plastics Piping Systems. End-Load-Bearing and Non-End-Load-Bearing Assemblies and Joints for Thermoplastic Pressure Piping. Test Method for Long-Term Leaktightness Under Internal Pressure ISO 13846:2000

实施日期：2000-10-01

NF E63-606-2008

Plastics and rubber machines - Presses - Safety requirements.

GB/T 11037-1989

船用辅锅炉及受压容器液压试验方法

The methods of hydraulic tests of the marine auxiliary boilers and pressure vessels

GB/T 11037-2000

船用辅锅炉及受压容器强度和密性试验方法

Test methods for strength and tightness of marine auxiliary boiler and pressure vessel

实施日期：2000-12-01

ASTM A760/A760M-2010

污水管和排污管用金属镀层波纹钢管的规格

Standard Specification for Corrugated Steel Pipe,Metallic-Coated for Sewers and Drains

实施日期：2010-09-01

ISO 6783-1982

混凝土的粗集料 颗粒密度和吸水率的测定 液体天平法

Coarse aggregates for concrete -- Determination of particle density and water absorption -- Hydrostatic balance method

发布日期：1982-06-01  实施日期：1982-06-01

DIN EN 3-8-2007

Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar

实施日期：2008-01-01

BS ISO 6264-1998

液压传动.减压阀.装配面

Fluidtechnik. Hydraulik-Druckbegrenzungsventile. Befestigungsflaechen Hydraulic Fluid Power-Pressure-Relief Valves-Mounting Surfaces Transmissions hydrauliques. Limiteurs de pression. Plan de pose Supe...

实施日期：1998-05-15

GB/T 4751-1984

农村家用水压式沼气池质量检查验收标准

The standard for check and acceptance of the quality for household hydraulic biogas digesters in rural areas