NF S31-014-2-1995

Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations. Part 2 : mounting and operating conditions for draw-off taps and mixing valves.

GB 18145-2003

陶瓷片密封水嘴

Ceramic cartridge faucets

适用范围：本标准规定了陶瓷片密封水嘴(以下简称水嘴)的产品分类、技术要求、试验方法、检验规则及标志、包装、运输和贮存。　　本标准适用于安装在建筑物内的冷、热水供水管路上，公称压力不大于1.0MPa、介质温度不大于90℃条件下的各类水嘴...

发布日期：2003-08-07  实施日期：2004-04-01

NF E29-340-2006

Industrial valves - Ball valves of thermoplastic materials.

BS EN 200-2008

卫生用水龙头.PN10型单一和混合水龙头(公称尺寸1/2)通用技术规范.最小流动压力0.05MPa(0.5bar)

Sanitary tapware. Single taps and combination taps for water supply systems of type 1 and type 2. General technical specification

适用范围：This European Standard specifies:a) the field of application for pillar taps, bib taps, single and multi-hole combination taps for use in:1) a supply system of Type 1 (see Figure 1);2) a supply system ...

实施日期：2009-01-31

NF E29-470-2006

工业阀门 旋转阀 钢制球阀 ISO 公称压力10,16,20,25,40,50,100

Industrial valves - Steel ball valves.

BS 949-3-1993

丝锥.管螺纹丝锥规范

Screwing Taps Part 3:Specification for Pipe Thread Taps

适用范围：This Part of BS 949 specifies dimensions and tolerances for screwing taps for the following thread series: a) parallel internal pipe threads for use where pressure-tight joints are not required to be m...

实施日期：1993-03-15

DIN EN 200-2008

Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification

实施日期：2008-10-01

QB/T 3895-1999

旋塞式热水嘴

Pluged hot-Water taps

实施日期：1998-04-21

QB 2806-2006

温控水嘴

适用范围： 本标准规定了温控水嘴的术语和定义、分类和标记、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于公称压力不大于05MPa，热水温度不大于85℃的条件下使用，安装在盟洗室（洗手间、浴室等）、厨房等卫生设施上...

实施日期：2007-05-01

GB/T 18145-2000

陶瓷片密封水嘴

Ceramic cartridge faucets

ISO 9714-1-2012

整形外科钻孔设备 第1部分:钻刃 丝锥和沉头铣刀

Orthopaedic drilling instruments -- Part 1: Drill bits, taps and countersink cutters

适用范围：ISO 9714-1:2012 specifies materials and mechanical properties, dimension and marking requirements for drill bits, taps and countersink cutters made of stainless steel for use in orthopaedic surgery wit...

发布日期：2012-06-01  实施日期：2012-06-01

DIN EN 15091-2007

Sanitary tapware - Electronic opening and closing sanitary tapware; German version EN 15091:2006

实施日期：2008-01-01

DIN 16261-2004

压力计用带套筒-套筒和套筒-轴颈接头的旋塞

PN 16 cocks with female/female and female/male connection for pressure gauges

适用范围：This document specifies sizes and materials for PN 16 stopcocks.

DIN 20030-1992

管配件.直通旋塞. 连接尺寸

Hose fittings; straight-way-cock with grip; dimensions, materials, requirements

适用范围：The document specifies main- and connecting dimensions, materials and requirements for straight-way-cocks and their handle grips. Such are used in mining especially for closable connections for hoses a...

EN ISO 17292-2004

Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2004)

发布日期：2004-08-01  实施日期：2004-08-01

DIN 16263-2004

压力计用带联接套管、轴颈和检验接头的旋塞PN16

PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges

适用范围：The document defines sizes and materials for PN 16 stopcocks.

NF E66-120-1975

圆柱和锥形管螺纹手用螺丝锥

Hand taps for pipe threads for parallel and taper threads.

DIN EN 13828-2003

建筑用阀件 大楼饮用水装置用铜合金和不锈钢制手动球阀

Building valves - Manually operated copper alloy ball valves for potable water supply in buildings - Characteristics and tests; German version prEN 13828:2000

QB/T 1334-2013

水嘴通用技术条件

General technical specifications for faucets

适用范围：本标准规定了水嘴(水龙头)的术语和定义、产品分类、材料、配套装置、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于公称尺寸为DN15、DN20、DN25，公称压力不大于1.0MPa，供水温度5℃～90℃条件下使用的，安装在建筑物...

发布日期：2013-07-22  实施日期：2013-12-01

GB 18145-2014

陶瓷片密封水嘴

Ceramic cartridge faucets

适用范围：本标准规定了陶瓷片密封水嘴（以下简称水嘴）的术语和定义、分类及命名、材料、配套装置、要求、试验方法、检验规则、标志、包装、运输和贮存。

发布日期：2014-05-06  实施日期：2014-12-01